How Do I generate a Filtered gaussian white noise

Can someone please help me on how I can generate filtered gaussian white noise in LabVIEW.

Actually in the moment you specify a sample rate for your Gaussian white noise data you apply a filter equal to F_sample/2. But anyway If you want to have 10 seconds with white noise sampled with Y Hz in sample frequency. Then you create an white noise array, with 10xY samples or elements. Then you apply your filter 
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Similar Messages

  • How would you generate moving tv static - white noise?

    Hey guys and gals - been searching, but with no success, to try and find out the best way to make moving white noise / tv static.
    Anyone got any suggestions at all?
    thanks in advance
    Allen

    I did this once using the gradient colorize filter over a video set to +50 repeats on a grayscale gradient. Then I just added a "TV static" noise I found on google. With this filter, you can even "morph" a video from full static to a clean image, giving kind of a cool poltergiest effect.

  • How to add gaussian white noise to array of one's and negative one's ?

    how to add gaussian white noise to array of one's and negative one's ?
    Solved!
    Go to Solution.

    Is it this that your are trying to accomplish:
    TO:
    Here's the code to do that.
    Michel

  • Histogram of Gaussian White Noise with NI5112

    I am digitizing some random gaussian white noise with a NI-PXI 5112. The problem is that even with very high number of samples (1 Mega sample) the distribution presents a lot of periodic pikes when making a voltage histogram (either with built in function or by postprocessing data with Mathematica).
    I am using two synchronized digitizers and they both have the same behaviour (pikes symmetric around 0 and with periodicity), but give different response from one another.
    I already tried to filter the data, change the vertical range of both aquisition and generation devices, but the pikes always appear at the same relative values, and with the same relative number of counts.
    How can I overcome this problem ?

    Could you post a screenshot of your histogram? How many bins do you have in your histogram?
    Remember that the 5112 is an 8-bit boards so you only have (in the order of) 256 possible values so unless you 'hit' the exact values your bins will have un-equal weights. This could result in the periodic behavior you are observing.

  • Gaussian White Noise - Seed

    Hi everybody,
    I want to call the "Gaussian White Noise.vi" several times (lets say, in a loop) and thereby, I want to fully control the state of the random generator which is used in the VI.
    I think, that the "seed" input somehow determines the state of internal random generator (which is unfortunately "hidden" in a DLL).
    So, what I would like to have is an output parameter that returns the last state of the random generator .
    The idea is, that I can call the VI several times setting the "seed" input parameter equal to the state of the random generator of the last call. By this, I could get a reproducible stream of random numbers by simply setting the "seed" input parameter of the first call to a user defined value.
    I hope, I was able to explain my wishes.
    Thanks for all replies
    Stefan

    Hi Kevin,
    thanks for your good idea. This works fine.
    If a guy from NI reads this message: It would be helpful anyway, if the state of the random generator would be returned by the VI "Gaussian White Noise.vi". Think about an extensive simulation with a many iterations and after a certain time, an interesting result occurs. If one wants to reinvestigate this interesting result, one has the re-run the complete simulation until one gets to the time instant where the result occurs. If the state of the random generator would be availabe, one could save this state in each iteration and re-running the complete simulation would not be neccessary anymore. One would reload the state of the generator for the interesting iteration and would have to re-run a singe iteration. Would be much faster.
    Thanks again
    Stefan

  • HOW TO TURN OFF NAP TO ELIMINATE WHITE NOISE?

    RE: HOW TO TURN OFF NAP TO ELIMINATE WHITE NOISE
    Ive discovered that when ever I attempt to record audio in Logic pro 8 I get a constant white noise in the back ground. I've seen proevious posts regarding this and have downloaded the xcode developer tools but cant find the right path to locate the "nap disbale" option. I'm using  a mac pro intel 10.6.8 [snow leopard] please advice as I am going out of my mind!!...thanks

    There is a forum devoted to Logic Pro you might want to ask there.

  • How do I get rid of the white noise that plays over my music?

    Hey.
    I got 5 CDs today and I wanted to upload them onto my iTunes to put on my iPod. But when I put in 4 of the CDs I got white noise over the top of the music making it unlistenable. But the 5th album(Double CD) worked perfectly fine. I know the problem isn't the CDs because I played them through my PS3 and they were absolutly fine. If anyone can help. Its greatly appreciated.  
    Thank you.
    - DowellG8

    Go to Edit > Preferences > General > Import Settings and check the box for error correction, and then try one of the problem CDs again.

  • Adding white noise to signal

    Hi,
    I am trying to figure out how to allow a user to add white noise to a signal, the idea is that the user would enter the noise ratio in db which I would then apply to a signal measurement before displaying it. I looked at the add gaussian white noise vis in LV but I am not sure how to go from the noise ratio that the user enters to the seed and standard deviation inputs for the function.
    I tried to look online but all I found was ways to add noise based on amplitude, is there a way to convert from the db ratio to amplitude given that I do not know the amplitude information of my original signal before hand since it is being sampled in real-time.  Any information about this would be greatly appriciated i realize that I might be mis-understanding the way signal/noise processing really works.
    Thank you,
    A 

    dB is a dimensionless relative measure, you need a reference intensity in order to calculate it
    Often times in electronics you see things referenced to 1 mW,  called dBm = 10 log10(P / 1mW), so P = 10^(dBm/20)
    http://en.wikipedia.org/wiki/DBm 
    For sound dB SPL = 20 log10(I / I0), I (intensity) is usually expressed  Pascalls  I0 is nearly always referencec to human hearing threshold, which is 2 * 10^-5 Pa.   Multiply by your mic gain to convert to from pressure to volts.

  • How do I generate redemption code for creative cloud?

    how do I generate redemption code for creative cloud?

    On October 27th 2014, you have purchased two CC (one complete &one photography) under the same Adobe ID. That is the reason you are being asked for a code because under one Adobe ID only one CC can be activated(twice).
    Please contact Adobe Support or you can inbox me privately the CC order number  that you would like to cancel.
    You can also check if the host file has Adobe entry or not as if Adobe entries are there then also CC can ask for serial number. You can check the host by the followinh method.
    Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
    So you need to login with your Adobe ID and password to activate the cloud membership.
    Log out & log back in of the CC Desktop App.
    In case it is not signing in successfully please try the following:
    I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
       Windows:
       In windows 7 navigate to following location:
         /windows/system32/drivers/etc
       1. look out for "Hosts" file
       2. Open it with notepad
       3. Check if you have any entry for Adobe
       4. Remove the entries and try again launching any product from CC
      Mac:
       1. Please click on "Go" and navigate to /private/etc
       2. Open "hosts" file and check out for any entries for Adobe.com
       3. Remove the entries and save the file
       4.  try again launching any product from CC
      Please refer to Creative Cloud applications ask for serial number
    Hope it helps you.
    Regards
    Rajshree
    Cannot license Illustrator CC after buying subscription

  • My background color for all pages has changed to pink, how do I get it back to white?

    The background color in all of my screens has switched to pink. How do I get it back to white? I wonder if it changed when I was shopping in a web site and had clicked on a pink watch(?)

    Check the default color settings:
    *Tools > Options > Content : Fonts & Colors > Colors
    * [X] "Allow pages to choose their own colors, instead of my selections above"
    *https://support.mozilla.com/kb/Changing+fonts+and+colors

  • How can I Generate two different reports from single execution of Test cases in NI teststand

    Hi,
    My requirement is to generate two different reports from NI teststand. One for the Logging of error descriptions and the other report is by default generated by the Teststand. How can i generate a txt file that contains error descriptions other than that mentioned in the default report?
    Solved!
    Go to Solution.

    Do you need to do that just for these two sequences but not for other sequences? I don't see a problem to use SequenceFilePostStepRuntimeError. Create this callback in both sequence files and configure them to log into the same file. SequenceFilePostStepRuntimeError callback is called after each step of the sequence file if it has runtime error. You can access the calling step error information via RunState.Caller.Step.Result.Error property. Take a look to attached example.
    The "other way" is useful if you need to log errors not for every step of the sequence file, but for some of them. This is more complex, because you need to create a custom step types for these steps. For the custom step you can create substeps (post-step in your case) which will be executed every time after step of this type executed. Then, this is you job to determine if error happened in the step, acces to step's error information is via Step.Result.Error property. 
    Also, be aware that step's post-expression is not executed in case of error in the step.
    Sergey Kolbunov
    CLA, CTD
    Attachments:
    SequenceFilePostStepRuntimeError_Demo.seq ‏7 KB

  • How can I make the background one solid color?  It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop.  So, how can I have just a solid white background?

    How can I make the background one solid color?  It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop.  So, how can I have just a solid white background?

    When talking about a specific image posting the image may be useful.
    One can use a Layer Mask and add a white Layer underneath.

  • How do I generate a Word document and a PDF from Help files?

    Hi,
    I am new to RoboHelp HTML, and am using version 8.  I updated some Help files, and now I want to generate output.  Here are my questions/ or the process I used:
    To compile the help, I clicked Generate Primary Layout.  Is this correct?  I noticed that the date stamp on the xpj file has not changed.  The date is still from many months ago.  (Why is that?  Should it show a recent update date?)  However, the files that I updated do reflect the dates when I made the updates.  These include art files, an hhp, and htm, js, ldb, pss, cpd files.
    To generate a pdf, I clicked Generate PDF.  I was not able to generate the PDF at first, but then, I enabled macros in Word 2007 (Trust Center Settings > Enable all macros...and clicked the checkbox, Trust access to the VBA project object model), and clicked Generate PDF.  At the end of the generation, I got this error in Word: Microsoft Office Word has encountered a problem and needs to close.  We are sorry for the inconvenience.  The info you were working on might be lost.  Word can try to recover it for you.  I closed the dialog and Word generated several blank documents.  Microsoft Office Diagnostics was run and found one problem and corrected it.  Despite the error message, a pdf was generated.  (If you could give me any insight on why I got the error messages, that could be helpful to know).
    How do I generate a Word document?
    Thank you!
    Erin

    Welcome to our community
    Note that RoboHelp is capable of creating a variety of layouts. WebHelp, FlashHelp, AIR Help, Microsoft HTML Help, JavaHelp, Oracle Help, ePub and more.
    Any of these layouts may be nominated as the Primary layout. So when you generate the Primary layout, you get whatever has been configured as the Primary layout.
    Only certain actions will result in a change to the .XPJ file. The actions are indicative of major changes to the project. So I wouldn't fret the fact that the date time stamp wasn't updated.
    Indeed the Printed Documentation Single Source Layout recipe is what you use to create PDF. Generally what happens is that RoboHelp creates a Microsoft Word document as an intermediate file type, then creates the PDF from that. As you might imagine, there are a host of things that can go wrong during the process. I might suggest that you first get a Word document to generate cleanly. Then once you do that, focus on PDF. I know that I typically gen a Word document and stop there. I just open Word and use Word to create the PDF.
    If you look at the properties for the Printed Documentation Single Source Layout recipe (View > Pods > Single Source Layouts then right-click the Printed Documentation layout and choose Properties) you will see that PDF, Word or both are options at the top of the dialog.
    Hopefully that gives you a nudge in the right direction.
    My fellow Adobe Community Expert Peter Grainge has excellent info on Printed Documentation on his site at Grainge.org. Click the link below for that.
    Click here to visit Peter's site
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcererStone Blog
    RoboHelp eBooks

  • How do I generate a Certificate Signing Request (CSR)?

    If I buy an SSL in godaddy, how do I generate the CSR? If my site is hosted in BC, who is the web server? I've had a few sites search for the name of the web server and it comes up as unknown every time.

    Hi
    You can not host your own SSL certificate on Business Catalyst at this stage.
    When you upgrade your site with an online store and shopping cart, you don't need to worry about purchasing a SSL certificate. In fact, this system does not support SSL certificates from third-party vendors because each SSL certificate is set to a single server, and the hosting servers for the live site are built in large clusters; purchasing a certificate for every server would be cost prohibitive.
    When a customer purchases items from you, the system utilizes the secure URL that is included with every site to ensure that the customer's credit card number and other personal information entered ion a live site are protected using Secure Socket Layers (SSL) technology.
    More Details :
    http://forums.adobe.com/thread/984496
    http://kb.worldsecuresystems.com/kb/secure-urls.html
    If you need an update or more depth information regarding same, please get in touch with BC support team and they will help you out.
    Thanks,
    Sanjit

  • How can I generate SSL Keys from a Oracle 9iAS server version 1.0.2.2.0

    How can I generate SSL Keys for use on Oracle 9iAS server
    version 1.0.2.2.0. I have tried using the open_ssl method but
    was unsuccessful.

    <?xml version="1.0" encoding="UTF-8" ?>
    <nodes>
    <node>
    <category_id>3</category_id>
    <parent_id>2</parent_id>
    <name>Mobile</name>
    <is_active>1</is_active>
    <position>1</position>
    <level>2</level>
    <children>
    <node name="Nokia" category_id="6" parent_id="3" is_active="1" position="1" level="3">
    <node name="Nokia N79" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
    <node name="Nokia N95" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
    <node name="Nokia N97" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
    </node>
    <node name="Samsung" category_id="7" parent_id="3" is_active="1" position="2" level="3">
    </node>
    </children>
    </node>
    <node>
    <category_id>4</category_id>
    <parent_id>2</parent_id>
    <name>Laptop</name>
    <is_active>1</is_active>
    <position>2</position>
    <level>2</level>
    <children></children>
    </node>
    <node>
    <category_id>5</category_id>
    <parent_id>2</parent_id>
    <name>Monitor</name>
    <is_active>1</is_active>
    <position>3</position>
    <level>2</level>
    <children></children>
    </node>
    <node>
    <category_id>8</category_id>
    <parent_id>2</parent_id>
    <name>Camera</name>
    <is_active>1</is_active>
    <position>4</position>
    <level>2</level>
    <children></children>
    </node>
    </nodes>
    Is this correct format to create dynamic menu?

Maybe you are looking for