How do I generate a visitor report for a specific web page?

I want to look at the traffic/visitors who go to a specific page. Despite my searching the knowledge base, I can't see how to do this. To me, this is 'Web reports 101' - ie, a basic requirement, but it doesn't seem possible?
Appreciate any advice.
Thanks

This might help:
http://msdn.microsoft.com/en-us/library/ms252067(VS.80).aspx
Ming Man

Similar Messages

How to resize logo in AI file for use on web page? [was: new with this program]

Hola , i got my logo and the online company sent it in low resolution, I asked for the proper resolution for my web page and the company sent me this :
The AI (Vector) file(s) in the zip file are to be utilized for all high-res.
and commercial printing applications. It is an Adobe Illustrator file and
can only be opened and/or utilized if you have this professional design
software. All commercial printers will have access to utilize these files.
I got the adobe illustrator and I am trying to fix the logo and just can not get the size , any tip will be apprecite !

the company is giving you the vector (master) file that you can make use for web (RGB) or print (CMYK)..
logo for web, there are 2 points in here:
the size
1st. check the artwork's unit → (menu) File → Document Setup → Units → Pixels (as for web)
then resize / scale the artwork to your size needed - you can also use Width & Height value in Transform palette
the resolution (you asked for)
Ai is not like photoshop that you need to change the dpi, because the artwork is vector format ('resolution free')..
only while exporting (saving to raster) there will be dpi selection:
(menu) File → Export → Save as type (PNG / JPG) → Save → PNG or JPG Options → Resolution

How can I recive automatic web pag updates for a specific web page when it changes?

I want to be automatically notified of changes to this web page:
http://soundcyclists.com/SpecialEvents.htm#CapeTrip
Context of web address:
NOTE: CAPE TRIP (September 8 - September 11)
=====================================
In the next few days, limited reservations for this trip will be open to SCBC members. It is important that you to read all the information posted at http://soundcyclists.com/SpecialEvents.htm#CapeTrip about the trip so you can decide if you want to go.
IMPORTANT: If you decide you want to go, you will need to standby in the next few days when the reservation system is opened, since there is limited space and there has already been an expressed interest by many in going.
We want to give all members a fair and equal opportunity to reserve a spot but you must know reservations are on a first come, first server bases so you must be ready when the link to the reservation system appears. Just return to the URL above (you may want to bookmark it), where you will be able to access the system when it's available.
Once the limited is reached, the system will be shut down. Any reservation that get through after the limit is reached and before the system is turned off, will be refunded.
Payment will be made through our PayPal system so as they say, have your credit card ready. Be sure to read the posting for details in advance of the reservation system becoming available.

*AlertBox: https://addons.mozilla.org/firefox/addon/alertbox/
*Check4Change: https://addons.mozilla.org/firefox/addon/check4change/ www.check4change.com/
*Update Scanner: https://addons.mozilla.org/firefox/addon/update-scanner/ updatescanner.mozdev.org/

How go generate Popularity Trends report for a custom list in SharePoint 2013

Hi,
I want to generate Popularity Trends report for a custom list in SharePoint 2013, is it possible?
Thanks
khadar pasha

According to
this link you should be able to access this option from the Items tab. for this to work, the Analytics Processing Component needs to be running.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How can we generate result set report?

how can we generate result set report ?means the out put of one query be the input of another query?how it is?

Hi
You have to use APD ( analysis process designer) to use results of one query as the input for the other queries.
Check this link
http://help.sap.com/saphelp_nw70/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
Regards

Generating 2 test reports for the same test - XML and HTML

Hi All,
I have a special test requirement.
Need to generate 2 test reports for the same test. One in HTML and the other in XML format.
Is there any direct method for that?
How it can be implemented?
Thanks in advance.
SajK

Hi SajK,
To accomplish this task, you will need to modify the process model. For example, if you are using the sequential process model, you can concentrate on the TestReport sequence call and the various report related steps in the Single Pass and Test UUTs sequences.
The TestReport sequence (also a callback) relies on Parameters.ReportOptions.Format to decide which of the following sequences to use when generating the report:
<TestStand>\Components\NI\Models\TestStandModels\reportgen_txt.seq
<TestStand>\Components\NI\Models\TestStandModels\reportgen_html.seq
<TestStand>\Components\NI\Models\TestStandModels\reportgen_xml.seq
In your case, instead of choosing one of the sequences, you could hard code it to use both the html and xml sequences. Be aware that for this to work, you must also modify and/or duplicate most of the report related steps in the Single Pass and Test UUTs sequences. For instance, the Set Report Format step becomes unnecessary since you are hard-coding the report format. On the other hand, the Write UUT Report step needs to be duplicated, one step to write to an html file location, and another to write to the xml file location.
Please note that modifying the process mode in this way will deprecate some of the settings in the report options dialog box (such as the report format). For more information on TestStand report generation, please refer to the following DevZone article:
Report Generation Explained
Regards,
Message Edited by James M on 05-29-2007 03:08 PM

How can I activate drill down report for planned line items please urgent?

Hi Everyone,
Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
Kind regards
Arvey.

Hi
It is based on the reports attached in the Report Group - TCODE: GR53
In the Report Group screen
Press CONFIGURE This is to attach any Drill Down reports.
Press the Insert Line icon
As is the screen may be used to insert a Report Writer report group. To add an ABAP, press other report type
Double click on ABAP Reports
Enter the name of the ABAP and ENTER
<b>RCOPCA08 Profit Center: Plan Line Items</b>
VVR

How do I print a contact report for a select group?

How do I print a contact report for a select group?

You should be able to select the group instead of all contacts. Older article.
Contacts – Print Contact Information

How do I switch on delivery reports for a Nokia N8...

Hi There
I'm probably being a bit stupid here, but I can't find anything in the N8 online manual! How do you switch on delivery reports for when you send text messages, to see if someone has A) recieved your text, and if possible B) read it!
Thanks for your help
Solved!
Go to Solution.

Delivery reports are a network feature so it's not surprising that Nokia could not help you with them.
If they stay pending then it's likely that you are on a network that doesn't support them or the service isn't enabled on your account (for example you are on a network that charges for delivery reports).
If your network does not support them all you can do is disable the feature and delete the pending reports. If deleivery reports are essential to you then you'll need to switch to a network that does support them.

How can I generate email from report 6i.

Dear Sir,
When I click on e-mail button on report 6i (Win2k User) Generate following error:-
Rep-4203 error occurred while a mail message.
Rep-4220 There is a problem with the email subsystem.
When I generate report from administrator then email generated no error occurred.
Please help me how can I generate email from report 6i without administrator rights.
Thanks and Regards
Brij

You can try this at form that calling your report;
add_parameter(p_id,'DESFORMAT','HTML');
hope this helps...
defne
ps: raporu cagiridigin form program units'ine, bu add_parameter'i eklersen, HTML olarak raporunu emailleyebilirsin...

Hello. I have an old G4 Tower at 10.4.11. The password for Keychain has been lost. How can I generate a new password for Keychain? Every time I use Safari it want me to enter the password. Any suggestions? Thank you

Hello. I have an old G4 Tower at 10.4.11. The password for Keychain has been lost. How can I generate a new password for Keychain? Every time I use Safari it wants me to enter the keychain password. Any suggestions? Thank you

See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

Enabling BW reports for a specific port

Hi All,
How to enable BW reports for a specific prot?.
Our requirement is Report should run FIRST, if I type the URL manually with the port we configure in SICF.
Thanks in Advance.
Regards,
Ravi Chelikani.

Ravi,
the port is configured per protocol (HTTP, HTTPS, etc) in transaction SMICM.
Regards,
Marc
SAP NetWeaver RIG, US BI

In R12, can payroll user enter expense report for employees via web-based?

Hi,
In R12, can payroll user enter expense report for employees via web-based screen? Previously in 11i, it can be done via the Expense Report forms.
Appreciate advise on this.
Thanks in advance.
Regards,
Shiau Chin

Hi Anne,
Please see page 42 of the [url http://download.oracle.com/docs/cd/B34956_01/current/acrobat/120oieig.pdf]iExpenses Implementation and Admin Guide for R12 . If you are unable to enter the ID as per the guide, I would suggest raising an Service Request with Oracle Support.
Cheers, Pete

No Data to display in Application failure report for a specific Application

Hi ,
For a specific application,Application failure report showing no data to display but for the same application other reports shows value.
Application failure reports seems to work fine for some other application except few.Need to know the root cause.
Kindly help us to sort this issue.
Thanks & Regards,
Preethi S

Hi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How do you set the font color for a specific entire row inside a JTable?

How do you set the font color for a specific entire row inside a JTable?
I want to change the font color for only a couple of rows inside a JTable.
I've seen some ways to possibly do this with an individual cell.
Clarification on changing the font color in an individual cell would be helpful too if
there is no easy way to do this for a row.

hai,
Try out with this piece of code.Create your table and assign the renderer to each column in the table.
CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
for(int i=0;i<your_JTable.getColumnCount();i++)
your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
class CellColorRenderer extends JLabel implements TableCellRenderer
CellColorRenderer()
setOpaque(true);
setHorizontalAlignment(LEFT);
setVerticalAlignment(CENTER);
setBackground(Color.white);
setForeground(Color.black);
protected void setValue(Object value)
     setText((value == null) ? "" : value.toString());
public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
     if(isSelected == true)
          setForeground(Color.red);
     else
          setForeground(Color.black);
     setValue(value);
     return this;
regards,
bala

How do I generate a visitor report for a specific web page?

Similar Messages

Maybe you are looking for