How do I get 128-bit encryption in Firefox 4.0 for a financial website?

I need 128-bit encryption capability on my web browser in order to use a specific financial website for bill paying, The site's encryption test shows that Firefox 4.0 (newly installed) does not provide that level of security. Help?

I think the www.opm.gov site may be looking for the '''U''' that was in the Firefox 3.6 and earlier useragents as it was one of the things removed in Firefox 4.0 and newer useagents. The site says it recognizes the browser but does not detect that your web browser supports 128-bit high encryption which contradicts.
The "U" stands for "USA" (for the version with 128-bit encryption) (since 1996).

Similar Messages

  • How do i set 40 bit encryption on firefox 17

    simple question, need answer

    If you need to connect to a server that only works with 40 bit encryption then you would probably also need SSL2.
    Both these haven't been present in Firefox for a very long time.
    *https://developer.mozilla.org/Firefox_8_for_developers#Network
    You can check a web server via a site like this:
    *https://www.ssllabs.com/ssltest/

  • How to Access a 128-bit encrypted site

    Hi all..
    i am new bie to this. my query is
    i need to access a login page
    say i have login.asp and i am passing userid and password to it
    say login.asp?userid=prasanth&password=kumar if i am passing directly to POST request my browser showing result "cookies were not enabled".
    i had used HttpsURLConnection and try to run its not resulting.

    Is the virtual win-5a8pp4v402g server in the same domain as the remote system you are trying to browse to it from?  If it is then all you need is a DNS entry or an entry in the Hosts file of the remote system that points that name to the IP address
    of the VM.  If its not then you will need an AAM that uses a Fully Qualified Domain Name as the address of the SharePoint site.  YOu will also need either a DNS entry or a Hosts file entry on the remote system that points that FQDN to the IP address
    of the VM.  Here's an article on AAMs in SharePoint.
    http://blogs.msdn.com/b/sharepoint_strategery/archive/2013/05/25/alternate-access-mappings-explained.aspx
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Does dictation use 128 bit encryption as icloud does?

    What kind of encryption does dictation use if any?  Is it comparable to the 128 bit encryption listed as being used for icloud communications?

    Current Firefox releases can't even go below 128 bit, SSL2 that supported this have been removed quite a few releases now (Firefox 8 dropped support for SSL2).
    *https://developer.mozilla.org/en-US/docs/Mozilla/Firefox/Releases/8
    128 bit is the minimum that you can use with Firefox and you can only go higher (e.g. 168 or 256).<br />
    128 bit shouldn't be used these days and servers that only support 128 bit should update their software.
    Firefox supports AES-256 since 2002, so that is already more than 10 years.
    * https://www.fortify.net/sslcheck.html

  • I need firefox to support a 128 bit encryption for a website I need to use for work. How do I accomplish this?

    www.opm.gov/e-qip/ is a government site that I need to use to fill out a questionaire for employment. It says my web browser does not support a 128 bit encryption which it needs for the site to work properly. How do I increase the encryption bits?

    It is a warning that you can ignore.
    <blockquote>Warning - We did not detect that your web browser supports 128-bit high encryption. If you have trouble connecting after you click the "Continue" button below, you will need to upgrade your web browser to a version that supports 128-bit encryption.</blockquote>

  • Where can I get Messaging Server 3.5 with 128-bit encryption?

    Where can I get Messaging Server 3.5 with 128-bit encryption?
    <P>
    Messaging Server 3.5 is available for export (40-bit encryption)
    and domestic (128-bit encryption). The domestic version includes
    support for Fortezza.

    It can be updated from any computer with an Internet connection but is best done from the computer which it normally syncs with. The update itself is free; if you have someone do it for you, you may be charged.
    Click here for installation instructions.
    (88299)

  • I need at least 128 bit encryption to access secure sites. What level of encryption does Firefox have and how do I check it?

    Many banking sites require you to confirm that you have at least 128 bit encryption on your browser. I allowed a site to check the encryption on my browser (Firefox/Windows) and was told I didn't have at least 128 bit encryption. I'm not the most computer savvy, so I don't know how to check or increase encryption, so if someone could guide me, I'd really appreciate it.

    Right-click on the web page and select '''View Page Info'''. The '''Security''' tab will show the level of encryption being used in "Technical Details" at the bottom of that tab.
    Firefox matches the level of encryption used by any secure website, and will easily do more that 128-bit encryption.

  • I am currently using a desk top imac with firefox as the browser. I need to access a website that requires 128 bit encryption. How do I increase bit encryption?

    when I log into view my accounts, a pop up asks me to use either explorer or netscape with 128 bit encryption. since i use a mac, i do not have either. can i up the encryption using firefox?

    https://support.mozilla.com/en-US/questions/903234
    see also SSL Encryption Report( fortify net) in '''cor-el''' reply, in support.mozilla link inside the above link.
    thank you

  • How to Implement 128 bit Encryption

    hi all,
    I am developing an application in which i want to implement 128 bit Encryption.
    Please suggest me the way to implement the 128 bit encryption.
    thanks in advance
    lakshman

    Here is a simple example that works fine:
    package encryption;
    import java.math.BigInteger;
    import java.security.SecureRandom;
    import org.bouncycastle.crypto.AsymmetricBlockCipher;
    import org.bouncycastle.crypto.AsymmetricCipherKeyPair;
    import org.bouncycastle.crypto.encodings.PKCS1Encoding;
    import org.bouncycastle.crypto.engines.RSAEngine;
    import org.bouncycastle.crypto.generators.RSAKeyPairGenerator;
    import org.bouncycastle.crypto.params.RSAKeyGenerationParameters;
    import org.bouncycastle.crypto.params.RSAKeyParameters;
    import org.bouncycastle.crypto.params.RSAPrivateCrtKeyParameters;
    public class Encryption {
         private RSAPrivateCrtKeyParameters _RSAPrivateKey;
         private RSAKeyParameters _RSAPublicKey;
         public static void main(String[] args) {
              Encryption theEncryption = new Encryption();
              String theStringBeforeEncryption = "String to encrypt";
              String theStringAfterEncryption = null;
              byte[] theEncryptedString;
              try {
                   System.out.println(theStringBeforeEncryption);
                   theEncryption.generateRSAKeyPair();
                   theEncryptedString = theEncryption.RSAEncrypt(theStringBeforeEncryption.getBytes());
                   theStringAfterEncryption = new String(theEncryption.RSADecrypt(theEncryptedString));
                   System.out.println(theStringAfterEncryption);
              } catch (Exception e) {
                   // TODO Handle exception!
                   e.printStackTrace();
         private void generateRSAKeyPair () throws Exception {
              SecureRandom theSecureRandom = new SecureRandom();
              BigInteger thePublicExponent = new BigInteger("10001", 16);
              RSAKeyGenerationParameters theRSAKeyGenParam =
                   new RSAKeyGenerationParameters(thePublicExponent, theSecureRandom, 1024, 80);
              RSAKeyPairGenerator theRSAKeyPairGen = new RSAKeyPairGenerator();
              theRSAKeyPairGen.init(theRSAKeyGenParam);
              AsymmetricCipherKeyPair theKeyPair = theRSAKeyPairGen.generateKeyPair();
              _RSAPrivateKey = (RSAPrivateCrtKeyParameters) theKeyPair.getPrivate();
              _RSAPublicKey = (RSAKeyParameters) theKeyPair.getPublic();
         private byte [] RSAEncrypt (byte [] toEncrypt) throws Exception {
              if (_RSAPublicKey == null) {
                   throw new Exception("Please generate RSA keys first in order to work");
              AsymmetricBlockCipher theEngine = new RSAEngine();
              theEngine = new PKCS1Encoding(theEngine);
              theEngine.init(true, _RSAPublicKey);
              return theEngine.processBlock(toEncrypt, 0, toEncrypt.length);
         private byte [] RSADecrypt (byte [] toDecrypt) throws Exception {
              if (_RSAPrivateKey == null) {
                   throw new Exception("Please generate RSA keys first in order to work");
              AsymmetricBlockCipher theEngine = new RSAEngine();
              theEngine = new PKCS1Encoding(theEngine);
              theEngine.init(false, _RSAPrivateKey);
              return theEngine.processBlock(toDecrypt, 0, toDecrypt.length);
    }Mihai

  • New iPad asks for WiFi password. There is none. My WiFi uses WEP 128 bit encryption, but there is no "password" to enter.

    Brand new to the iPad. It's asking for a password to the WiFi network in my home. There is no "password" as such associated with this WiFi network. It uses WEP 128 bit encryption where each byte is a hexadecimal number and is called a "key" Typing this lengthy thing in gives me no results. The iPad keeps on asking for a password. I have three computers and a DVD hooked to the network which has been working for a decade, so that's not the issue.
    Basically I'm stuck not being able to get onto the WiFi system.

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • 128 bit encryption requirement not working

    Using S1 6.0 sp5 on solaris 8, connecting to WAS 4.5 application servers.
    The require 128 bit encryption setting is in obj.conf with an error page to serve if lower than 128 bit encryption is used.
    This works fine for all plain text html requests, however, when a request goes to the websphere application the encryption requirement is ignored.
    Has anyone seen anything of this nature before?

    I'm not using SiteMinder or weblogic, my suggestion was based on your problem description. If you can show us your obj.conf file, we can check and try to find out a solution. You are right, AuthTrans will come before PathCheck but this should still allow PathCheck stage functions to be processed when the request processing goes through the pathcheck stage....I don't know how SiteMinder implements the SAF though.
    Thanks
    Manish

  • 128 bit encryption

    I am currently developing a web site.
    And one of the requirements is to enforce 128 bit encryption.
    We are currently using weblogic 6.0 sp1.
    If I try to connection our web site without 128 bit encryption on my IE 5,
    IE 5 just tells me that
    it could not find url.
    How could I check in http:// to see if user's browser is 128 bit encryption
    compatible?
    So that I can send them over to https:// with 128 bit encrytion or if they
    are not compatible,
    I can give a link to them to download patch.
    Please help.
    Thank you in advance.

    Safari does have 128 bit encryption; it's the web site that's been coded to sniff for certain browsers, like IE or Firefox. Complain to your bank and tell them to fix it so it works on all standards-compliant browsers, regardless of platform.

  • XI - 128 Bit encryption

    Whether XI (3.0, SP 16) is capable of doing 128 bit SSL Encryption? We are in the process of making a bridge with our external partners (B2B).
    We want to install Certificates, and want to do the Encryption?
    Who will install the Certificates? From where we can buy these certificates?
    Who will do this process?
    What are all the other points that we need to remember when we do this 128 bit Encryption?
    Thanks

    Hi,
    SSL is supported by WebAS, and XI is just an application on top of it.  The certificates are entered using the Visual Administrator, and also in the ABAP environment, depending on whether you also plan to use it with the SOAP adapter.  The configuration is normally done by the basis person.
    128-bit is supported.  You can get certificates from various providers, e.g. Verisign.  To work with a partner who has an user certificate, that user will have to provide you with his public certificate.
    The XI Configuration Guide that comes with the installation CD have the instructions.  Also, you can access that following weblogs for additional info:
    /people/gregor.wolf3/blog/2005/10/11/setup-https-ssl-for-the-sneak-preview-sap-netweaver-04-abap-edition-on-windows
    /people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
    Regards,
    Bill

  • SSL - 128 bit encryption instead of 40 bit?

    Hi,
    I setup my Tomcat 4.0.3 server to use SSL as directed in a book on servlets that I bought from sun press. Everything works fine, the server starts with SSL support and you can access it with https:, download the cert, etc. I downloaded jsse 1.0.2 jar files and put them into my /jre/lib/ext/ dir as directed and created the keystore for the key with:
    keytool -genkey -alias tomcat -keyalg RSA -validity 730
    also directed by the book.
    My problem is that the keys generated are using 40 bit encryption instead of strong 128. I want to make the site as secure as possible and I'm wondering how to do that. I followed the directions exactly, downloaded the version of jsse for us/canada and yet my certs still say that they were encrypted with 40 bit not 128 bit encryption.
    Mike

    My problem is that the keys generated are using 40 bit
    encryption instead of 128. What client do you use to connect to Tomcat?
    If the client does not support 128 bit keys for RC4, the browser
    and SSL 3.0 may negotiate a weaker session encryption key,
    in your case 40 bit.
    I don't use Tomcat, but with my web server you can configure
    the SSL protocol versions it accepts, and the ciphers it accepts;
    ie I can switch off everything other than RC4-128. -- Can the same
    thing be done in Tomcat, and how can it be done?

  • SSL, 128-bit encryption problem

    Hi
    I need to establish a connection over SSL with 128-bit encryption from my
    client application to Active Directory. But when a connection is established
    I look at the System log and see the cipher strength is only 56.
    Does anybody have an idea how can I raise the cipher strength?
    Thanks

    Sorry,
    It was my fault. I used 56-bit SDK. After upgrade all is perfect.
    "Gennady" <[email protected]> wrote in message
    news:9mgd4d$[email protected]..
    Hi
    I need to establish a connection over SSL with 128-bit encryption from my
    client application to Active Directory. But when a connection isestablished
    I look at the System log and see the cipher strength is only 56.
    Does anybody have an idea how can I raise the cipher strength?
    Thanks

Maybe you are looking for

  • Add New line item from Quote to Contract using CRM_ORDER_MAINTAIN

    HI Gurus, I need to add a new line item with entire item details such as SALES PRICING etc in contract, i am confused like what are the parameters i need to pass to FM CRM ORDER MAINTAIN, Please help me on this regard. Thanks & regards.

  • Balance Sheet and Income Statement

    Hi Guys, Assets and Expense (AST and EXP) are stored as +ive in the system Liabilities and Income (LEQ and INC) are stored as -ive in the BI system. But I see all positive values in the Input schedule. Sometimes in Reports I see -ive values. Is it li

  • When & Why to Use WL Adapter for MQSeries as compared to MDB?

              We have a need to both send and receive message via MQSeries in asynch mode.           Initial assessment was to receive messages via MDB and send messages by use a           pool of Sessions to the MQ Mgr connection.           Given this w

  • 0 PLS-00707: unsupported construct or internal error [2603]

    I have several packages and their bodies which can be correctly imported into XE. However, when I recompile the body of some of the packages I get the PLS-00707... error. If I drop the body and then issue a "create or replace package body ..." with t

  • How to auto refresh a tree region

    Is possible to automaticaly refresh a tree region?