How do I get 1920x1080 res w/o using QT

I am doing a presentation that my clients want the resolution to be 1920x1080. The only option for this in iMovie is Sharing to QT. I tried this and the playback was horrible. The presentation is being projected on a wall from a DVD player. I do not need the menus from iDVD. I just need the presentation to loop continuously. How can I get the highest, cleanest resolution from iMovie that will play on a DVD? Any help is GREATLY APPRECIATED!!

The presentation is being projected on a wall from a DVD player. I do not need the menus from iDVD. I just need the presentation to loop continuously. How can I get the highest, cleanest resolution from iMovie that will play on a DVD?
If you are authoring your content for playback on a "commercial" DVD Player, then al content, whether HD or SD, will be encoded as an standard definition file in a 720x480 data matrix (whether the aspect ration is 4:3 or 16:9). To retain HD content in HD dimensions, your would either have to record/playback via Blu-ray or write your content as "data" files to you DVD. As data files, you will need a computer and multimedia player application for playback/output of the DVD files to your projector.
ADDED: Oops, a bit slow. Sorry for the duplication, Appleman.

Similar Messages

How do I get 1920x1080 from iMac7,1?

Current setup...
iMac7,1 connected to a Panasonic TCL42E50 using an Apple display port to VGA adaptor.
NOTE: I HAVE CONFIRMED IN THE USER MANUAL THAT THIS TV WILL DO 1920x1080
My iMac specs...
Mac OS X 10.7.4 (11E53)
Model Identifier:          iMac7,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
ATI,RadeonHD2600
I spent several hours on this and still can't get 1920x1080 res to display on my Panasonic 42". So is this an iMac problem? an adaptor problem? or TV problem? The Radeon 2600 graphics card is supposed to be able to display 1920x1080.
1920x1080 isn't an option.
I installed SwitchRezX and created a custom resolution and the highest it will accept is 1366x768. Anything higher than that, the Panasonic 42" won't accept the signal and the iMac display goes back to it's default res of 1680x1050.
I'd like to know if anyone who owns an iMac7,1 that has successfully output 1920x1080 and how you did it. I've heard everything from firmware issues in the Apple display adaptor to Apple blocking 1920x1080 on non-Apple displays (which I highly doubt Apple would do that) I just baught this adaptor so surely it's not a firmware issue.

Thanks for the link...was able to read up and learn the limits of a VGA connection.
So I think I understand the issue. After talking to Panasonic, they told me that my model only supports up to 1366x768 when using a VGA connection and they said to use the HDMI to get full 1080p quality. So, the user's manuel was misleading because it doesn't specify the limitations of the VGA port.
I'm still unsure if the iMac7,1 supports HDMI 1080p. I haven't been able to find an Apple mini-DVI to HDMI adaptor, but I did find an Apple mini-DVI to DVI adaptor that I could plug in a DVI to HDMI cable. Doing it this way I'm not sure if it would even be true 1080p even though the video card in the iMac7,1 can handle the resolution on a VGA connection. The apple specs say that the iMac7,1 supports external display via DVI up to 1920x1200 so if I converted that over to HDMI not sure if that would look right. I think I will shift my attention to my newer MacBook Pro which does suppot HDMI.
http://support.aple.com/kb/SP16
http://service.us.panasonic.com/OPERMANPDF/E-HELP_E50.PDF pg.33
Hope this helps anyone in the future.

I am unable to launch my illustrator 5.5 or 6. It is asking me to instal Java SE 6. When i go to the website it installs java 8. How do I get Java SE 6. to use my illustrator.

I am unable to launch my illustrator 5.5 or 6. It is asking me to instal Java SE 6. When i go to the website it installs java 8. How do I get Java SE 6. to use my illustrator?

Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium

How do i get data from a structure using join?

hi,
what is the actual use of a structure.?
my problem is :
KUAGV is an existing STRUCTURE. it has got one fields each which links to MARA, AND VBKD tables. i want to fetch all related information from KUAGV, mara, vbkd . which is the better way : using joins or views or anything else? how do i
get data from a structure using join?

structure temporarily holds any data passed to it dynamically throughout the runtime but doesnot store it permanently. so
a structure cannot be included in a join.so instead of incuding structure KUAGV's field in a join
search the transparent table in which same field are present and use it in join.
A structure if created in DDIC(Data Dictionary) is a global DATA STRUCTURE which is used to group related information, for example you would group all the details of your bank account into a structure BANK_ACCOUNT that contains fields like account_Id, account_holder_name etc.
If you create a structure in your program then it is local to your program. So you use this structure to create data holders of this DATA TYPE to hold data in your program.
Edited by: suja thomas on Feb 11, 2008 6:24 AM
Edited by: suja thomas on Feb 11, 2008 6:31 AM

I have an encrypted back up password that I can't remember and I can't back up to icloud. How to I get a backup I can use?

I have an encrypted back up and can't remember the password. I can't back up to icloud either (maybe because of that). How do I get a backup I can use?

mwrodd wrote:
How do I get a backup I can use?
Either remember your backup password, or you don't.

I have changed my Apple ID on my iPad, but my iPhone keeps popping up with the old ID.....how do I get all my devices to use the same ID?

How can I get all my devices to use the same Apple ID?

Different services on your iOS device (iMessage, Facetime, iCloud, iTunes and App Store) can be signed into with an Apple ID of your choice. Make sure you verify the settings for each device and that you are signed in to each service with the correct Apple ID.
I'll do an example for iMessage:
1) Go to settings on your iOS device
2) Select "Messages"
3) Select "Send & Receive"
4) At the very top you will see "Apple ID", by selecting your Apple ID, you will now have the option to sign out of messages with the current Apple ID, and sign in with the new one.
The steps for changing your Apple ID for other services will be very similar.
tHIS SHOULD BE VERY HELPFUL TOO YOU.

How can we get tag of XML file using SAX

Hi ,
I'm parsing one SAX parser , I'have almost done this parsing. i have faced problem for one case, i'e how can we get tag from XML file using SAX parser?
XML file is
<DFProperties>
<AccessType>
<Get/>
</AccessType> <Description>
gdhhd
</Description>
<DFFormat>
<chr/>
</DFFormat>
<Scope>
<Permanent/>
</Scope>
<DFTitle>gsgd</DFTitle>
<DFType>
<MIME>text/plain</MIME>
</DFType>
</DFProperties>
I want out like GET and Permanent... means this one tag which is present inside of another tag.
Handler class like
public void startElement(String namespaceURI, String localName,
               String qName, Attributes atts) throws SAXException {
if(_ACCESSTYPE.equals(localName)){
               accessTypeElement=ACCESSTYPE;
public void characters(char[] ch, int start, int length)
               throws SAXException {
if (_ACCESSTYPE.equals(_accessTypeElement)) {
               String strValue = new String(ch, start, length);
               System.out.println("Accestype-----------------------------> " + strValue);
               //System.out.println(" " + strValue);
public void endElement(String namespaceURI, String localName, String qName)
               throws SAXException {
if (_ACCESSTYPE.equals(localName)) {
               _accessTypeElement = "";
. please any body help me

Hi ,
I have one problem,Please help me.
1. How can I'll identify where exactly my Node is ended,means how how can we find corresponding nodename? in partcular place
<Node> .............starttag1
<NodeName>Test</NodeName>
<Node>................starttag2
<nodeName>test1</NodeName>
</Node>..................endtag2
<Node>.....................starttag3
<NodeName><NodeName>
<Node> .........................starttag4
<NodeName>test4</NodeName>
</Node>.......enddtag4
</Node>...........end tag3
</Node>............endtag1
my code is below
private final String _NODENAME = "NodeName";
private final String _NODE = "Node";
private String _nodeElement = "";
     private String _NodeNameElement = "";
public void startElement(String namespaceURI, String localName,
               String qName, Attributes atts) throws SAXException {
if (_NODENAME.equals(localName)) {
               NodeNameElement = NODENAME;
if(_NODE.equals(localName)){
     System.out.println("start");
     if (_NODENAME.equals(localName)) {
               NodeNameElement = NODENAME;
public void characters(char[] ch, int start, int length)
               throws SAXException {
if (_NODENAME.equals(_NodeNameElement)) {
               String strValue = new String(ch, start, length);
               String sttt=strValue;
               System.out.println("NODENAME: ************* " + strValue);
if(_NODE.equals(_nodeElement)){
               if (_NODENAME.equals(_NodeNameElement)) {
                    String strValue = new String(ch, start, length);
                    String sttt=strValue;
                    System.out.println("nodevalue********** " + strValue);
public void endElement(String namespaceURI, String localName, String qName)
               throws SAXException {
if (_NODENAME.equals(localName)) {
               _NodeNameElement = "";
if(_NODE.equals(localName)){
               System.out.println("NODENAME: %%%%%%%%%");
please help me. How can I figure node ending for particular nodename

How do I get a pdf to open using Safari?

How do I get a pdf to open using safari?

try right click, open in new safari window or tab. Some PDF's download right away,some are able to open in Safari. If not, they should be able to open in Preview.

How do I get rid of the Not Using SoftArtisan File UP notice that is slowing down my uploads to class where I teach?

How do I get rid of the Not Using SoftArtisan File UP notice that is slowing down my uploads to class where I teach? A notice now appears every time I upload an image to class as an attachment that says, Not Using SoftArtisan File UP, and this appears to be slowing down my uploads tremendously. I want to get rid of this. I never used it before and don't need it and don't want it. I just want the uploads to work like they did before this idiotic notice started slowing things down.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How can I get the App store to use money in my account rather than a credit card when I want to buy something?

How can I get the App store to use money in my account rather than a credit card when I want to buy something?

The iTunes/Mac App Stores use credit on an account first. You are asked to supply an additional payment method when the cash credit doesn't cover the complete cost of the purchase.

My text notification light no longer works now since the Lollipop upgrade. How do I get it back since i use my phone in silent mode most of the time?

My text notification light no longer works now since the Lollipop upgrade. How do I get it back since i use my phone in silent mode most of the time?

We want you to love your software update pitbullmommy71! When did you update your phone? Have you tried going into phone settings and set up your notifications as you would like them? It can take a few days for your phone to normalize after the update, but this may be a bit much. Some apps may no longer be compatible with the new software so you can try running phone in Safe Mode or do a Hard Reset to see if this improves your phone. I've seen where some have completed a Hard Reset after the update and downloaded all same apps, and phone works flawlessly now. However, if you'd like to try Safe Mode first, (which is where all 3rd party apps are disabled), you can certainly try this for 24 hours to see if improves.
Safe Mode: http://vz.to/1i0XGEW
Hard Reset: http://vz.to/1GrhWqy
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

How can we get requester's user id using java code

Hi,
How can we get requester's user id using java code?
eg: If i had logged in as xelsysadm and request a resource for user uid101 on the userid field it should display uid101 and not xelsysadm.
also,
I have a resoure "A" which on revoking should also revoke resources B and C. How can it be done. Resource A, B, and C are 3 different resource objects.
==Thanks,
doki

Ok, so there is a way, but it's not available during submission. You can use the findRequests api. From the result set, get the "Requests.Consolidated Data Value" value. In this information, you will get an xml formatted data. It provides the list of users on the request on the left side after submission. After the request is completed, this value is available. Upon completion, you could get the request information, get this value, and parse the information for user ids.
In the same adapter, use the following API:
formIntf.setObjectFormData(objInstanceKey, formHash)
The formHash is a hashtable containing the field name on your object form, and the values you wish to populate it with. You could create a textarea box on your object form and populate the userids for who the request is for.
However, this makes absolutely 0 sense. When you get a request, the list of userids are listed right there on the request.
-Kevin

Just got an iPhone 4s as a gift, how do I get a micro sim, I use Vodafone in india

Just got an iPhone 4s as a gift, how do I get a micro sim, I use Vodafone in india

you can go to a mobile shop ( service center) and ask them to make a micro sim with your current mimi sim card. or you can check the video's in the you tube and cut your card to a micro one and if u started using your mob with a micro sim can you please help me out with my doubt ?? is it perfectly working in india without jail break ???

HT201469 How do I get a refund if I used Apple Pay to purchase a Groupon?

How do I get a refund if I used Apple Pay to purchase a Groupon?

Go to the Mac App Store or the online Apple Store and contact Apple.
(108514)

Why can't I use my VTone I just purchased from Verizon Market as my phone ringer? It game me an option to mark it as my default ringer but when I go to 'settings' it only gives me the same generic ringtones, how do i get my new ringtone to use?

Why can't I use my VTone I just purchased from Verizon Market as my phone ringer? It game me an option to mark it as my default ringer but when I go to 'settings' it only gives me the same generic ringtones, how do i get my new ringtone to use?

I like to customize my phone with ring tones too! Let’s get this working for you.
Did you purchase the ring tone on our website or on the phone?
If it was purchased online the ring tone is sent to you in a message and you need to save the ring tone first http://bit.ly/PKUfUg and it is saved as a ring tone you can go in and set it as your default ring tone http://bit.ly/R5Xa4o.
If the ring tone was purchased on the phone you just need to go into your ring tone to set it up http://bit.ly/R5Xa4o.
Hope this is helpful. Keep me posted if you need further assistance.
John B
Follow us on Twitter @VZWSupport

How do I get 1920x1080 res w/o using QT

Similar Messages

Maybe you are looking for