How do I get a boot device

I need a boot device

Hi,
Are you serious ? Why do you need a boot device ? Boot device should be in your machine. Well, probably you've got a message saying "Boot device not found". If yes, please use the following instructions to fix:
  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_in...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How do I get my mobile devices to update my itune tunes?

    How do I get my mobile devices to update my itune tunes with the cloud?

    Can you explain more about what you are trying to do?  I'm not sure what you mean when you say you want to update your iTunes music with the cloud.

  • I have changed my Apple ID on my iPad, but my iPhone keeps popping up with the old ID.....how do I get all my devices to use the same ID?

    How can I get all my devices to use the same Apple ID?

    Different services on your iOS device (iMessage, Facetime, iCloud, iTunes and App Store) can be signed into with an Apple ID of your choice. Make sure you verify the settings for each device and that you are signed in to each service with the correct Apple ID.
    I'll do an example for iMessage:
    1) Go to settings on your iOS device
    2) Select "Messages"
    3) Select "Send & Receive"
    4) At the very top you will see "Apple ID", by selecting your Apple ID, you will now have the option to sign out of messages with the current Apple ID, and sign in with the new one.
    The steps for changing your Apple ID for other services will be very similar.
    tHIS SHOULD BE VERY HELPFUL TOO YOU.

  • How can I get my Boot Camp partition off my old drive?

    I swapped out the stock 160gb drive that came in my MacBook Pro since it was acting up. I installed a new drive and restored it with Time Machine, but now my Boot Camp partition is still on my old drive. I slipped my old drive into a usb sata enclosure and tried booting from it in hope I could back it up with Winclone. When I went into the startup disk selector the drive would not show up (but it sounded like it was trying to spin up). Earlier when I pulled the drive out of my MacBook Pro it was still functioning fine, so I do not think the drive has failed.
    Any ideas on how I can get the Boot Camp partition off the old drive? Thanks for your help.
    -Ryan

    Some drives require more current to spin-up from a "cold start" than most USB ports put out, even if the port supplies. Additionally, if the drive is failing, it may require even more power for the startup.
    I have a couple USB enclosures with external AC power that I keep around in case I run into drives like this. Failing that, I also have a couple of USB cables which use 2 ports to provide additional current. Also the cable length, and gauge makes a difference.

  • How can I get a boot-disk for a Compaq P2500 laptop Windows XP Home Edition?

    I'm already in another forum with a eerily similar question, but that's for the HP Media Center Pavilion m8000e desktop system (Windows Vista Home Premium) I was just given; I've ordered a new hard drive for that. I assume the directions to create a boot disk with the *.iso file (using Imgburn) is going to work; I have the 25-digit code for that.
    This question here now is for my wife's older Compaq P2500 2596US laptop running Windows XP Home Edition. This too needs a new hard drive, but I also am missing the boot disc for this; I do have the 25-digit product code.
    How can I get a boot disk for this laptop? I tried the Ubuntu method outlined in a few posts; geez, what a headache ... never could get it managed. Does HP not make any boot disks available? Microsoft told me to check with HP.
    I can furnish the product code; model #; serial# ... gee, maybe the oroginal receipt is even laying around somewhere ...
    I need a boot disk to get the new hard drive up on board (if I end up ordering that).
    Thanks for any help!
    Michael

    Hi 
    Please find the link given below might be helpful for your.
    http://www.computersurgeons.com/productdetails.aspx?ID=4219
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • I'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk

    i'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk

    Page 5, step 2, #2, 2nd bullet.
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.7.pdf

  • Within Facebook, I have '6' photo albums.  On my iPad Air or my iPhone 4S, when I go into Photos, select a photo to send to Facebook, I only see '2' Facebook photo albums listed!  Thoughts on how I can get my 'I' devices to recognize all '6' FB albums?

    Within Facebook, I have '6' photo albums.  On my iPad Air or my iPhone 4S, when I go into Photos, select a photo to send to Facebook, I only see '2' Facebook photo albums listed!  Thoughts on how I can get my 'I' devices to recognize all '6' FB albums?

    OMG, I totally did not see the edit button at the top right corner of the Albums window/page.
    Selecting that, then selecting the album BIKE brought up the RED button to the left of the album and ta-da, delete.
    Sometimes I seek so hard I do not see.
    jojoguitar

  • Since iTunes update my PC will not see other devices keep getting message The procedure entry point sqlite 3_wal_checkpoint could not be located in the dynamic link library SQLite 3.dll, how do I get my other devices to be found?

    Since iTunes updated my PC my  other devices are not seen and I keep getting message "The procedure entry point sqlite 3_wal_checkpoint could not be located in the dynamic link library SQLite 3.dll", how do I get my other devices to be found? or do I have to remove all Apple software.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • How do i get all my devices to recognize a changed password?

    How do i get all of my Apple devices to recognize a changed iCloud password? My PC is fine but iPhone and iPad are confused.

    Hi Boilerdog,
    Thanks for visiting Apple Support Communities.
    Be sure to sign in to iCloud again using this step:
    On your iPhone, iPad, or iPod touch: Go to Settings > iCloud, then tap your iCloud account.
    From:
    iCloud: Change your iCloud password
    You will be prompted to enter your new password at this point.
    Best Regards,
    Jeremy

  • How can I get Apple Mobile Device to appear in the Administrative Tools\Services folder?

    My iPhine still won't sync with iTunes. I was instructed to go to Control Panel\Administrative Tools\Services to locate Apple Mobile Devices, but it isn't there. How can I get it there?

    See Here...
    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • How do i get my boot camp windows7 internetconnection to work with usbadapter

    How do I get my internetconnection via usbadapter (twisted pair TP) to work on my Boot Camp windows7. I run OS LION. WiFi works good on both windows and Lion. On Lion does it also work good with the USBadaper to TP connection. I have the latest Brodacom driver installed on Windows7.

    I do not know the answer myself, but I bet if you post in the boot camp forum, someone will be able to help you in a more timely manner.  https://discussions.apple.com/community/windows_software/boot_camp.  Good luck.

  • HT2589 We have several devices and they don't show up in my account, how do I get all my devices into one account.

    We are trying to figure up how to get all our devices to be recognized in one account.

    Hi nesonmcbride,
    Welcome to the Support Communities!  The following resources will help you associate your iPad and iPhone with your Apple ID.  
    Apple - Support - My Support Profile
    https://supportprofile.apple.com
    If you don't see your iPad or iPhone listed, click on the "Add Products" link at the bottom left corner of this page.
    iTunes Store: Associating a device or computer to your Apple ID - Apple Support
    http://support.apple.com/en-us/HT4627
    When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID. Your Apple ID can have up to 10 devices and computers (combined) associated with it, with a maximum of 5 computers at any time. Each computer must also be authorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days. You can view which devices or computers are currently associated with your Apple ID, remove unused devices or computers, and view how many days remain before the devices or computers can be associated with a different Apple ID from the Account Information page in iTunes on your computer:
    Open iTunes.
    Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
    Choose Store > View My Account from the iTunes menu.
    From the Account Information screen, click Manage Devices. 
    Next to each device or computer name, you will be able to see when each device or computer was associated with your Apple ID. You will also be able to track how many days remain before your associated devices or computers can be associated with a different Apple ID.
    Note: If no devices have been associated with the Apple ID, then the Manage Devices section will not be visible.
    I hope this information helps ....
    - Judy

  • Xsan 2 - How to present LUN as boot device

    How can I present a LUN to a SPARC or IBM POWER server to be used as block-level devices to install Solaris/AIX/VIO on and boot from?
    And how do I mask it from other clients and this is the bit I don't get, how can I have an Xsan 'client' that seems to be need to see the LUNs before the client OS is booted? 

    Well I gave up - whole thing is a mess, no way is this 'Enterprise-class' - I work sometimes on IBM XIV and DSxxxx and this Apple stuff is a POS compared. Even IBM call their V7000 StorWise series stuff 'not Enterprise' and it blows the socks off this.
    I love Apple but this isn't/wasnt their finest hour....

  • How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion?  Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

    I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7. 
    I would like to read and write in both directions from drive to drive if possible.  I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares. 
    I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:".  However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access. 
    Is the Paragon NTFS that comes with Mountain Lion limited in some way? 
    Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
    I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
    MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps.  I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
    My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
    Thank you for any guidance you can give me. 

    Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
    For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
    I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
    I would assme Paragon is limited. Try their site and knowledge base?
    MacDrive
    http://www.mediafour.com/updates/macdrive
    Paragon HFS
    http://www.paragon-software.com/home/hfs-windows/
    Paragon NTFS
    http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
    http://www.paragon-software.com/home/ntfs-mac/

  • How do I get my boot applescript to quit once it has finished?

    I have a script set up to boot Google Chrome on Login in fullscreen mode in Mountain Lion
    The problem is that the script is left in my dock and it needs to force quitted to exit.
    The script seems fairly simple but I'm not sure how to get the .app script to close once its finished doing its business!
    The script I am using is pasted below:
    do shell script "/Applications/Google\\ Chrome.app/Contents/MacOS/Google\\ Chrome --kiosk"
    Thanks!

    your script is waiting for a response from Chrome.  you should release the command as a separate process like so:
    do shell script "/Applications/Google\\ Chrome.app/Contents/MacOS/Google\\ Chrome --kiosk &> /dev/null &"

Maybe you are looking for

  • Standard Price of a material

    Hi All, Is there any FM or BAPI to find the standard price of a material from the invoice receipt? Thanks in Advance.. Regards, Nirmal.

  • Flex 4 VideoPlayer captioning and horizontal VolumeBar?

    I need to make a horizontal VolumeBar that looks like bars or just a rectangle and clicking on it would cover that rectangle with another rectangle to display the total volume, is that possible to make with the horizontal slider, or maybe it requires

  • I can't see layout preview

    Hi experts. I have a question about webdynpro for abap. I made a view and click the layout tab expting I can see the preview. However I met a error page with message: "The page cannot be displayed" How should I set something for preview page? Please

  • Circling a word by clicking on it

    Is there a way to click on a word in a PDF document and have that word circled (or boxed in with a border)? A friend asked me to work on a Character sheet for his game and a few of the selections aer made by "circling" a choice. Example: Good / Evil

  • CategoryAxis in BarChart

    Hello, I have a barchart, that I am transforming to a gantt chart since Flex Base Charts don't have a gantt chart, Anyhow, the issue that I am facing, is tha the vertical axis (which is category type now) does not sort and combine same datapoints...