How do I get a copy of version 2.2 of Measurement and Automation Explorer?

I am also interested in what new features/changes were made in V2.2 relative to 2.1. I noticed 2.2 on some systems here at Intel but didn't see it on the I web site.

Updates to MAX are included with updates to your drivers or newer software (LabVIEW, CVI, etc.). Upgrade to the newest NIDAQ (6.9.2) or NI488 (2.0).
As far as differences, there were a coule of bug fixes (1 important had to do with SCXI-1520 configuration). Also, it supports the newest version of VI Logger.

Similar Messages

How do I increase the field of view in Measurement and Automation Explorer (MAX) Version 3.1.1.3003

I am using Measurement and Automation Explorer Version 3.1.1.3003 to view pictures on a pc that are being sent from a video camera looking through a microscope. The image I see in the viewfinder of the microscope is MUCH smaller than the image that is displayed on the pc screen. Looking through the viewfinder of the microscope, I can see ~20 mm across the object, but the display from the camera in NI-MAX shows ~4.5 mm across the object. How can I change how much of an object is displayed on the screen in NI-MAX?
The camera is attached to the microscope with a camera adapter on the top of the microscope. The lenses the camera "looks" through and the lenses used when one looks through the viewfinder are the same, so theoretically, there should be no difference in what is displayed on the pc and what is seen through the viewfinder. We have ruled out the microscope and camera as the cause of the problem, which narrows it down to the NI-MAX software itself.
I saw in the forums that you can zoom out on an image; however, this does not change the distance across an image that is seen, just makes the picture of the same ~4.5 mm across the object smaller in size.
Any ideas or suggestions?

I have attached a picture of the object's image being displayed on the pc monitor. Where the field of view (FOV) in the microscope is almost 30 mm, the FOV displayed onscreen is about 7 mm. After contacting companies various times I discovered there was a reducing lens that goes in the C-mount adaptor, but it is over $300.
I thought maybe that the FOV could be changed in in NI Measurement and Automation Exploer (NI-MAX). Any ideas?
Attachments:
field of view.png ‏2437 KB

Measurement and Automation Explorer does not recognize two identical USB 3.0 cameras at once. How do I fix this?

I am running a set up which uses 2 identical USB Point Grey cameras of the same model (FL3-U3-13S2M-CS). Both USB cameras are plugged into the computer (blue USB cables).
When I open up Measurement and Automation Explorer and look under "NI-IMAQdx Devices" in the configuration tree, LavVIEW only recognizes one of the two USB cameras. Measurement and Automation Explorer only lists one camera, in which it recognizes it as "Point Grey Camera". Why this is occurring? How can I get LabVIEW to recognize two separate cameras of the same model?
Attachments:
PointGreyCamera.JPG ‏2847 KB
DualUSB.JPG ‏2932 KB
MeasurementAutomationExplorer.JPG ‏99 KB

That's about the old NI-IMAQ for USB cameras. IMAQdx has built in support for DirectShow connected cameras. IMAQdx should be able to use more than one DirectShow camera at the same time, but the Point Grey DirectShow driver may have some issues.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

I get an exception error when launching NI Measurement and Automation Explorer

The CniDMFuiProvider::Initialize plug-in caused an exception in the CmxExecutionThreadPool:oWorkNonUI function in the MAX process. What is mean. I cannot access NI MAX after I ignore this message, I will have to kill the process.

Greetings nintel
This type of NI-MAX exception is associated with a corruption in some files of the NI-MAX and has been solved in the past by either removing a MAX database corruption or repairing the installation of NI-MAX. Have you tried going to Control Panel>>Programs and Features>>NI Software and repairing NI Measurement & Automation Explorer? Please let us know if any of those steps solve the problem. Have a nice day.
Luis J.
Applications Engineer
National Instruments

How can I get all the options of Field Point Explorer 3.0.2 in Measurement and Automation Explorer 3.1?

I am a student using LabVIEW and Compact Field Point to implement a
senior design project in Electrical and Computer Engineering. We
have LabVIEW 7.1 and a cFP-2020 and additional modules. We are
trying to use the CTR-500 module to output a pulse train to drive a
stepper motor. We have found instructions online of how to do
this, but they all use Field Point Explorer. The instructions
make use of options in Field Point Explorer that are not included in
Measurement and Automation Explorer (the software included with the
cFP).
I have downloaded Field Point Explorer 3.0.2 and followed the
directions. Now, in LabVIEW, when I using the newly created .iak
file, I get a dialogue asking to find the SubVI: 'FP Read (Float Array
-IO).vi'. Included with LabVIEW are subvis for FP Read, but not
with the float array part. So I figure I cannot use Field Point
Explorer created .iaks with LabVIEW 7.1. So how cannot I access
the same options in Measurement and Automation that I was able to find
in Field Point Explorer?
Thanks

Hi,
FieldPoint Explorer is no longer used to configure FieldPoint systems. However, I do not think that the configuring your system in FieldPoint Explorer is causing the error.
FieldPoint systems are now setup in Measurement and Automation Explorer (MAX). Information on setting up FieldPoint systems in MAX can be found in the MAX help under: Installed Products>> FieldPoint. Also, I recommend upgrading to the latest FieldPoint driver and version of MAX. The FieldPoint VI's will be slightly different when you upgrade, so there is a good chance that this will eliminate the error.
Regards,
Hal L.

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

I just upgraded to Firefox 5. How can I get a copy of Firefox 4. The new version does not work with Skype's auto dialer.

How can I get a copy of the previous version of Firefox? The latest version (5) does not support Skype's auto dialer. I use this tool to be more productive.

Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended.
If Firefox disabled some add-ons (especially extensions), it likely is because they include a list of compatible Firefox versions and haven't yet been updated for Firefox 5. If they worked on Firefox 4, there is a good chance they will work on Firefox 5.
You can force Firefox to ''ignore'' add-on version restrictions by (what else) installing an add-on. Then you can test whether the add-ons important to you actually work in Firefox 5.
[https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter :: Add-ons for Firefox]
After you install this add-on and restart Firefox, there will still be a message that "--- is incompatible with Firefox 5.0" but the add-on will be enabled and a Disable button will appear for that entry.
Please report back on your results.

How can I get back the other version of itunes?

It was much easier to use and way more confortable, How can I get back the other version of itunes? It was much easier to use and way more confortable
I can't pass playlists from itunes to my i-pod, and the sthetic of the new itunes is not a good one.
Could I get back an older version? those were easier to use, more simplier

Apple wisely leaves a copy of iMovie version 9 installed in the Application folder when you download version 10.

How do I get a copy of iMovie 9?

I reformatted my iMac hard drive with Lion. I restored from the downloaded version of Lion and therefore do not have iMovie on my system. I had upgraded to iMovie 9 but now it's not available in the App Store nor from iTunes. Does anyone know how I might get a copy of iMovie 9?

Hi
iMovie 9 can mean different things - What do You need ?
iMovie History 08, 09 & 11
NOT AN EVOLUTION FROM Previous versions but a totally new application.
iMovie 08 (v7) 7.1.4 (aug 2007)
A new way of storing project and an event library as well
A totally new product in a pre-release state. Far from a working application.
Lacks even basal functions
No Speed-up or down or reverse
Lot’s of video-formats lacking
No cont. TimeLine - Bad logic
No good for interlaced SD-video from miniDV tape aimed to a DVD release.
(Discarding every second line makes quality as VHS in LP or EP mode = BAD)
NO - Playback via Camera/FW - and this prevents 100% safety-backups and the use of an extra TV/Monitor as real-time Quality control (as in iM 1 to HD6)
Color tools got much BETTER - nearly usable - even sort of a copy function
Direct share to .Mac and YouTube
More Cameras supported even AVCHD (need of Intel CPU)
Do not run on G4 or older - G5 minimum
Need of 1.9 GHz G5-Mac,
(Can run on 1.8GHz G5 iMac if installed on external boot hard disk and speedier Mac - can’t install directly)
Mac OS X.4.9 minimum
QuickTime 7.2 included
Aimed at - speed editing small video projects to be presented on the Internet - NOT DVDs
iMovie 09 (v8) 8.0.6 (jan 2009)
Far better than iMovie 08 but still far from good.
Pic in pic, green screen but rudimentary
Image stabilization - fairly good for amateur use
Speed-up/down and reverse
Bl/W, Old age etc
Still - No Continuos TimeLine
NO - Possibilities to enhance by use of third-part Plug-ins (all investments lost)
NO - Playback via Camera/FW - and this prevents 100% safety-backups and the use of an extra TV/Monitor as real-time Quality control (as in iM 1 to HD6)
Aimed at - speed editing small video projects to be presented on the Internet - NOT DVDs
iMovie 11 (v9) 9.0.x - 9.0.4 (2011 july)
Will be - Intel Only - Snow Leopard minimum Mac OS X.6.3
YES:
Advanced view including a true TimeLine ? Yes but rudimentary (very basic)
True Story-board - where You even can write and prepare space for lacking material that needs to be obtained or re-shoot. YES
Better wave-form presentation of audio and audio tools - Rubber-band - Yes
Trailer creating tool
”Faces” as in iPhoto - NO - but this finds if there are people in some video-clips
Better audio tools. Equalizer and a background audio reducer
More Camera support e.g. 24fps
NO
not 64-bit only
The Playback to Camera via FW - returns ? NO
Full Quality to iDVD - NO - still only half - every second line - Questionable - Some indicates it to be able to loss-less Exports - Has to be proven
Plug-in facility ? - NO
No free text tool
Tool to mask an identity e.g.. band over face or un-sharp area. - NO (could be obtained via Plug-ins in iM HD6 and earlier)
Animation tool - To point on interesting object/player - NO animations refer to a totally different
thing connected to Story-board and insert of ”dummy animations” while building a movie
iMovie 13 (v10) 10.0.x - 9.0. (2013 autum)
If iMovie'09 then You need the iLife'09 boxed CD-version.
Yours Bengt W

How Can I get a copy of Designer 6.5

We would like to get a copy of the Designer 6.5 Limited Production release so that we can begin evaluating the tool and planning for the migration from 2.1.2 to 6i. How can I get a copy of Designer 6.5?

Hello to all
another option is to download and install the portable firefox version from the next link, if you want to use it occasionally : http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox%2C%20Portable%20Ed./
portable version is more flexible, and you can delete it any time without worries
please read the [http://forums.mozillazine.org/viewtopic.php?f=23&t=2249039 ultimate guide from '''the-edmeister''']
thank you

HT3910 am in tanzania. and am in need of a copy of CDdrive for a macbook pro. how can i get a copy, please any one to help

am in tanzania.
Am in need of a copy of DVDdrive for a macbook pro OS. how can i get a copy, please any one to help

If you are referring to the original system reinstall discs that shipped with every Mac before Lion came out you'll need to contact Apple with the serial # of your Mac and order a replacement set of them.
Or look on one of the Auction websites or places like iFixit.com for a replacement set.
If your Mac came new with any of the Download Only versions of OS X, Lion, Mt Lion or Mavericks you don't need any discs to reinstall OS X. You use the Online Internet Recovery system or the built in Recovery HD partition inb the internal hard drive.
For the built in Recovery HD hold down the Command + r keys at startup. For the Online system hold down the Command + Option/Alt + r keys and keep them held down until you see a globe on the screen.

Hope yall can help. my PC crashed, how to i get a copy of the bookmarks of the hard drive? There are 3 users on the hard drive!

The PC will fire up and i get desk top but firefox will no launch. The 3 users have different web pages on them. How do i get a copy of the bookmarks of the hard drive?

You can find your personal data including the bookmarks in the Firefox profile folder.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
The "AppData" folder in Windows Vista and later Window 7+ versions and the "Application Data" folder in XP/Win2K are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders
See also:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
*http://kb.mozillazine.org/Lost_bookmarks

Measure for Windows, Disk 1 of 3 is damaged, how can I get a copy to install it?

El disco 1 de 3 del programa "Measure for Windows" esta dañado, estoy intentando instalarlo por primera vez y desafortunadamente cuando lo estaba instalando fallo la instalación y despues no ha reconocido el formato de este disco, ¿como podria obtener una copia de este disco?, ¿hay alguna manera de instalarlo en linea usando mi número de serie para instalarlo?.
Measure for Windows, Disk 1 of 3 is damaged, how can I get a copy to install it? or, can I install this SW online using my S/N?

Hello to all
another option is to download and install the portable firefox version from the next link, if you want to use it occasionally : http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox%2C%20Portable%20Ed./
portable version is more flexible, and you can delete it any time without worries
please read the [http://forums.mozillazine.org/viewtopic.php?f=23&t=2249039 ultimate guide from '''the-edmeister''']
thank you

How do I get a copy of Indesign CS6?

How do I get a copy of Indesign CS6? Trial version?
My OS (win XP) does not support CC?
Thank you

http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
http://prodesigntools.com/tag/ddl
Mylenium

How do you get a copy of Rosetta to install on 10.6.8?

How do you get a copy of Rosetta to install on 10.6.8? I have a power pc software program and need to install. I have read the help forums and Rosetta does not automatically install from the Apple servers. Is Apple discontinuing Rosetta support?

OP: Usually when you attempt to open a PPC application in Snow Leopard and it indicates that you need to install Rosetta, it will then do a download and install over the internet. You also have the option to install manually from the Snow Leopard Install DVD.
Is your Mac connected to the Internet? Any firewalls, or other blocks? You are at 10.6.8, can you continue to run Software Update, and download updates, for example the latest version of JAVA to avoid the current malware problem?
Recently I have been experimenting with various Snow Leopard installs into Parallels 7 for use of Rosetta in Lion. One of the times, I purposely did not check the install Rosetta in the Options before install. When I attempted to run a PPC application, indeed, Rosetta downloaded from the Internet and installed and the app run fine.
If you have MobilMe, you can log in and Apple is giving away the Snow Leopard Install DVD for free. I received mine about 4 business days after I ordered it on MobileMe.

How do I get a copy of version 2.2 of Measurement and Automation Explorer?

Similar Messages

Maybe you are looking for