How do I get a descent sound level and quality when exporting out of Logic ??

Hi guys,
I know this topic's been discussed many times before but I still can't fix my problem
I'm going crazy right now. It's been weeks I've been working on beats on Logic and I think they now sound pretty cool.
So I'm trying to export them out of Logic on mp3,or wav, or aiff but everytime it comes out very low. So when I'm applying different tips (limiter, adaptative limiter and different things I found on the internet... ) the sound level is a bit higher but still the quality is not as good as it is on Logic
So here's my questions : first, is it possible to get the exact same quality as the one you have when listening into logic ?
then how to get the best quality with a normal sound level  so when you listening to the mp3 or wave or aiff on itunes just after a normal song you don't have to turn the sound up
Thank you very much for you help !!
Ben

And in addition to what octopi wrote ……
Related Articles:
Mixdown for Mastering - written by Holger Lagerfeldt
http://www.onlinemastering.dk/mastering-faq.html
Loudness when Producing and Mixing - written by Holger Lagerfeldt
http://www.gearslutz.com/board/music-computers/468170-loudness-when-producingmix ing-
tips.html
Overload in Signal Conversion - written by Søren H. Nielsen and Thomas Lund
http://www.tcelectronic.com/media/nielsen_lund_2003_overload.pdf
0 dBFS+ Levels in Digital Mastering - written by Søren H. Nielsen and Thomas Lund
http://www.tcelectronic.com/media/nielsen_lund_2000_0dbfs_le.pdf
Level Control in Digital Mastering - written by Søren H. Nielsen and Thomas Lund
http://www.tcelectronic.com/media/nielsen_lund_1999_level_co.pdf
Cheers

Similar Messages

  • Sound Level and Quality in Macbook Pro 2.33

    I recently bought a Macbook Pro 2.33 and I am disappointed with the sound level of the speakers which are not very loud at full volume and the the sound quality not as good as my old Compaq Presario. My old Compaq Presario is about 3 to 4 times louder than my MacBook Pro. Also the Compaq Presario uses JBL Pro speakers. I have not seen any info on Apples site with regard speaker types. I believe the forum needs to add a dedicated section to Audio in general. Yes, I know is a section for Logic and Garageband, but other users use different programs. Can any user please tell me about their audio experience with the MacBook Pro 2.33?

    I don't think the audio is that bad. Maybe it's better on the 17" version. I know that it's louder and sounds more clear than my Toshiba Satellite. I also use external speakers when I really want to get good volume but I think my internal speakers do a good job. I will say that at half volume I get hardly any sound coming out at all though.

  • How can I get all of my images to appear when exporting from InDesign (CS2) to a pdf?

    Many of my images are disappearing when I try to convert them. I had this same problem last year, but I would just replace the picture (which was a huge pain because there are 24 images per page) and then eventually after a few attempts they would all show up. Any ideas what the problem is?

    OS = Operating System for your computer (and the version of the operatiing system, please, like Windows 7 x-64 or Mac OS X 10.8.3).
    Patch level is which updates you have installed for your version of ID. CS6 is version 8, and the latest patch is 8.0.1. If you don't know, once you tell us the OS we can tell you how to find out.
    Preview mode is accessed from a button at the bottom of the Toolbox, from the View menu, or by pressing W when the text tool is not active. It makes the pasteboard disappear, along with non-printing objects.

  • How to I make my animated vector images better quality when exporting to a SWF file?

    I created an interactive PDF and SWF file. My animation only works on the SWF file, but the vector image is low res. On the PDF it doesn't animate (which I know,) but it's high res. However, the SWF file animated, but looks low res. Thoughts?

    Changing text to an image should never be considered since there is no content for the SEO spiders and the images will slow your page download time to a crawl.
    This page shows web safe fonts and also how you need to use hosted fonts if you want something different...
    http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
    The above method uses an HTML snippet and, since this is fairly cumbersome, is only suitable for adding features like special headings. It does allow you to add text shadow using CSS rather than all these wasteful PNG images.
    To use hosted fonts on a whole site you would need to add CSS styles in the head of the HTML doc for every page of your site. But its not low tech and, if you could do this, you wouldn't be using iWeb!

  • How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.

    How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.
    I've tried plugging the hdmi into the TV directly and the receiver.
    I get video every time.  HBO to Go , Xfinity, ABC, Youtube, etc...
    just no audio.  Any suggestions? 
    I've tried starting the apps then plugging in the hdmi cable.
    I never tried this before I upgraded to IOS 5.

    Claudiamil-
    I had not tried it with mine since upgrading to iOS 5, so I just did.  I'm using a small Vizio HDTV.  I did not try YouTube, but did try several videos and musical numbers.  In all cases there was sound, including stereo when the source had it.
    I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down.  Dah*veed's suggestion to reset may be what you need.
    Fred

  • TS4002 How can I get a notification sound when an email arrives?

    I am using Safari and icloud to manage and check emial. I am not receiving a notification sound. How can I get an audiable sound to alret me?

    Thank you. I meant new mail alert sound, but I didn't word it right   I just want to know when  new mail comes in, but its not happening. I have done different methods, including the one you suggest, but it will alert sometimes and most of the times it doesn't. For a while when I got my phone (Iphone4) and downloaded IOS6 it worked. It stopped working when I had to reset my phone to factory settings a week ago.
    IOS has been updated and I have the latest software,. but it will not alert me each time I get mail. In few occassions I get the Ding of new mail, but for 15 mails I get maybe 2.
    Thanks for replying to my question

  • How do I change the startup sound level on my desktop??

    How do I change the startup sound level on my desktop?

    use StartNinja ! worked for me.
    it works under Mountain Lion and is even retina-ready:
    http://www.allvu.com/index.php/sndownloadpage.html

  • HT204370 how do i get the movie sound to play through the TV speakers, It is connected to my mac bookpro but the sound only comes through my macbook pro

    how do i get the movie sound to play through the TV speakers when watching a movie from Itunes, It is connected to my macbook pro but the sound only comes through my macbook pro.
    Thanks

    Transfer the movie from your iPad to your MacBook then. =)
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296

  • How can i get rid of sound effects icon in middle of screen?

    How can i get rid of sound effects icon in middle of screen?

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

  • How Do I Get This Guitar Sound

    How do I get this guitar sound? What effects is he using? Can I get it with Garage Bands sounds??
    Paul W.
    http://www.youtube.com/watch?v=E5sJVXXYVPA

    I'm no guitar expert my any means, but I'm pretty sure that's some sort of reverb pedal, along with using a whammy bar or bending the strings. Just add the reverb pedal to your amp set up, or adjust the reverb setting on the amp.

  • How do I get my imac sound back

    How do I get my Imac sound back?

    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964

  • How do I get website backround sound to play when I go to that site?

    New to Firefox. Installed version 3.6.
    How do I get the background sound to play when I go to a web site that has background sound/music?

    If a website uses bgsound then it will only work in IE.<br />
    Bgsound is not compatible with other browsers like Firefox.
    * http://kb.mozillazine.org/Background_music_does_not_play
    See:
    *http://allwebco-templates.com/support/S_script_music.htm

  • My iPad2 side switch is acting up, it will only allow me to have either sound or rotate. If I unmute the rotate won't work, if I mute the rotate works. How can I get the iPad to unmute and rotate? I have restored, downloaded updates and rebooted.

    My iPad2 side switch is acting up, it will only allow me to have either sound or rotate. If I unmute the rotate won't work, if I mute the rotate works. How can I get the iPad to unmute and rotate? I have restored, downloaded updates and rebooted.

    You should be able to control the function that the side switch isn't controlling via the left-hand end of the taskbar : http://support.apple.com/kb/HT4085 - is the icon that appears there (notification mute or rotation lock) indicating that that function is 'off' ?

  • HT4623 How do I get my battery percentage level to show

    How do I get my battery percentage level to show

    Hi,
    Today i bought I pad Air 2 after i connected to I Tunes i had a notifications as update available then i updated IOS 8.0 to 8.1.2 then restarted after installation there onwards batter percentage not displaying. i have tried many way's to as per suggested above but no luck
    Apple Dev Team what would be your fix for this.

  • I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen.  How do I get it to open programs and act like a monitor?

    I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen.  How do I get it to open programs and act like a monitor?

    Dear Jean:
    It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
    Open System Preferences.
    Choose the Displays Icon
    There will be several tabs to choose from pick Arrangement
    Drag the toolbar to desired display
    Let me know if this helps at all!
    Lance

Maybe you are looking for

  • How to Solve the listerner error?

    I install the oracle 8.1.5 server on my computer which operation system is Redhat 6.1 .Now I want to connect to the oracle from another linux computer.But every time I user the command sqlplus scott/tiger@[mytnsname] it just give me the result : Erro

  • Managing big tables

    RHEL 2.1 Oracle 9.2.0.8 Hi all, I have a partition table which is having more than 1.5 TB size (184 Partition). Every month we are creating new partitions but its bitmap index partition will get created automatically in different tablespace. I am pla

  • W7+NETWORK+SYNCHRONIZED FOLDER with PDF files in it. Impossible to open them with Adobe

    When I try to open a PDF file in a synchronized folder of my PC (running Windows 7) this error apperars " Can´t open file. File not found" I´ve tried several Adobe reader versions with identical result. If I try to open a PDF in any other network fol

  • APEX 3 installation

    We have 9i (9.2.0.5) database which has its own HTTP server running. To install APEX 3.0 , do we have to install old HTMLDB from oracle 10g companion cd first and then upgrade it to 3.0 or can we just unzip apex_3.0.zip to a new folder and then execu

  • The scripts run once oly

    I use sql developer version 3.2.20.09 i set the developer to look in "c:\scripts" directory the scripts. when i execute the script (F5 or F9) (@wsession.sql for example) the first time works. from the second always generates the errors: SEVERE 74 891