How do I get a full screen background on my site?

How do I make a resize-able background in my iweb site so that it's full screen no matter the browser size?

https://discussions.apple.com/thread/3183484

Similar Messages

  • How can I get a full screen on facetime

    How can I get a full screen on FaceTime

    You woul dprobably need to choose a zoom display mode on the TV.
    Any screem shots / promos for mirroring I've seen have been 4:3 ratio like the iPad screen resolution.
    To me this would be an obvious source of frustration to users of 16:9 TVs - unless there's an ipad 2 mode to somehow run in 16:9 not using the whole screen or not displaying the edges for mirroring, AppleTV2 may not be able to fill the screen

  • How can I get a full screen on my tv when i am mirroring from my ipad 2

    how can I get a full screen on my tv when I am mirroring from my ipad 2?

    You woul dprobably need to choose a zoom display mode on the TV.
    Any screem shots / promos for mirroring I've seen have been 4:3 ratio like the iPad screen resolution.
    To me this would be an obvious source of frustration to users of 16:9 TVs - unless there's an ipad 2 mode to somehow run in 16:9 not using the whole screen or not displaying the edges for mirroring, AppleTV2 may not be able to fill the screen

  • When I open "mail" all that opens is the gray ribbon on the top.I have to go to "Mailboxes/inbox" to get it to aspen. What happened? How do I get the full screen to open when I click my "mail" icon like it used to?

    When I open "mail" all that opens is the gray ribbon on the top.I have to go to "Mailboxes/inbox" to get it to aspen. What happened? How do I get the full screen to open when I click my "mail" icon like it used to?

    Move your cursor way over to the right side of the window. There should be a thin bar. when you hover over the left side of the thin bar, the cursor will change to a vertical bar with an arrow sticking out the left. Click and drag to the left.

  • HOW CAN I GET FACETIME FULL SCREEN?

    HOW CAN I GET FACETIME FULL SCREEN?

    HERE'S HOW:
    (1) Launch FaceTime
    (2) Connect with one of your contacts.
        (You must be connected to activate full screen view.)
    (3) As soon as you have established two-way video, the controls appear at the bottom of the picture like this:
    If the controls go away, hover your mouse in the bottom of the picture.  The controls will reappear.
    (4) Click the diagonal double arrows at the right side of the control box to enter full screen view:
    (5) Clicking the diagonal double arrows again or pressing <esc> (Escape) cancels full screen view.
    (6) If the above doesn't work, restart Mac and try again.  Unless your software is damaged, the above works.
    Message was edited by: EZ Jim
    Mac OSX 10.8.2

  • How can I get airplay full screen

    How can I get airplay full screen

    if you mirror a non widescreen device which as all ios devices to a widescreen tv it will not fill the whole screen
    if it did then it would be cutting top and buttom of your screen to fit or streght the image and made everybodys faces unnatrually wide
    many tv's support doing 1 of those 2 force to fill the whole screen features in their remote
    at least all the tv's I've had since they were still CRT tv's have supported that

  • How do I get safari full screen since ios8was installed it isn't

    HHow do I get safari full screen since ios8 was installed I can't

    I Just can't understand why and why we haven't had any instructions how to sort it

  • How do I get a full screen canvas back

    I'm a 20 year user -- today I lost 90 percent of my canvas - an inaccurate way of saying the screen on which the canvas sits is 1.5" wide and 22 " tall.
    The little thingy that one clicks on and holding down the mouse to drag it to full screen is not viaable.
    Shrinking the image I'm working on just shinks the image not the page.
    The image I'm working with is 3.75" x 2.25" standard biz card.
    Tried every trick I know to get my screen to behave - after 4 hours I have to plead for help or go crazy.
    This happened in the middle of a normal procedure--saving to the desktop.
    Any ideas?

    Boy oh boy do I feel like an idiot. Green resize button did the trick.
    Good Lord - talk about how to feel dumb and stuppid all at the same time .
    Thank you very much Gene and thanks to you Chris for suggesting the screen shot .
    Problem solved

  • How do you get a full screen picture in FaceTime

    I just switched from PC where I used Skype to a MacPro (Lion OS) and want to use FaceTime; but the picture is so narrow.  Can FaceTime produce a full screen picture.  The "Welcome" tutorial suggests so  but doesn't tell you how.  Thanks.

    Do a Google search for iPod touch repair. Lot of places have flat rates for that.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • How do I get to full-screen mode in Adobe Reader 10.4.4 for ipad mini? It's vanished.

    I updated Adobe Reader and now double tapping activates zoom. There does not seem to be any way to go to full-screen mode, and reading with the header (time and battery life icons) is unpleasant.

    Thanks for taking the time to post -- especially to a thread that was started almost a year ago.  I'll give your suggestion a try.
    Larry

  • How can I get a full screen shot of the album playing in Itunes 11?

    This was possible in Itunes 10 but I can not find a away to do it in Itunes 11.

    Hi Keith,
    It doesn't have to be a movie.  Snagit, for example can capture the complete browser window as an image which you can then save as a png, jpg, tiff, gif, bmp or snagit document.  That's what I thought the OP wanted so I didn't suggest the built in screen captures.
    Take care,
    ivan
    (To Philo9, I saved this with 80% quality, so it's not the best.  You can save as full quality, png or tiff to get better than this. Click on it to see it full size.)

  • How do I get a full screen pre-view on my ipad air when connecting my samsung NX 300 camera

    When connecting my samsung nx300 camera via wifi to my ipad air using samsung smart camera app I can only get a small pre-view window on the corner of the screen (80x40) The camera as been back to samsung and they have confirmed that it is working ok.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Doesn't solve your wifi connection problem, but you can use Apple's camera connection kit to transfer pics/videos from your camera. You can connect the camera to the iPad using a USB cable or use the camera's SD card.
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
     Cheers, Tom
    http://www.samsung.com/global/microsite/SMARTCAMERA/howtouse.html

  • Constant minimization and can't get the full screen --Intel Imac 17"

    I am obiviously a newbie. the windows constantly minimize with no apparent cause. How can I stop this and get some work done? Is it the mighty mouse, expose? I have tried them all
    The display only shows on 3/4 of the screen--how can I get a full screen view.

    Hi San Saba Kid,
    When you say minimize, are describing something like on a PC or when it minimizes do you see the page in dock?
    If you look at the lower right hand corner of an open window, you'll see a tirangular shape, you can click on this triangle and drag the window to a new size. You can fill up your entire screen by positioning your window and then dragging the corner to size it.
    I think this is what you meant... Rick
    BTW - the red dot closes - the yellow minimizes - the green optimizes the window so no horizontal scrolling is needed
    iMac G5 iSight 20" - 30G iPOD in Slimming Black -   Mac OS X (10.4.7)   - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620
    Message was edited by: JMEH

  • Full screen background slide show

    Trying to create a full screen background slideshow (workarround).
    But when I create a widget slideshow 1920px pinned to the background everything is working fine until a change some settings.
    Like No counter. Muse then adapt the size of the widget to far more smaller?
    More people this problem?
    René

    Here's a similar thread that should most likely answer any queries you may have in regards to getting a full screen background slide show working using a jQuery plugin - http://forums.adobe.com/message/5330925.
    Thanks,
    Vinayak

  • How to get to full screen from Browser View?

    I just upgraded to Aperture 3. In version 2, I could go full screen from the Browser View easily with just hitting "f". It appears this is no longer possible in version 3? I can get to full screen from the other views no problem.
    Any help?
    Thanks,
    Phil

    Thanks for the replies. Perhaps I should be more specific: I want a single image to be full screen. When I'm in the Browser mode with several images displayed and hit either f or the "full screen" on the tool bar, I simply get a slightly enlarged browser with a black background showing the same multiple images (essentially just eliminating the inspector on the side and the toolbar). On the other hand, if I'm in Split View or Viewer mode, the f key works fine.
    This was the same when I was in the Apple Store yesterday and my "consultant" was somewhat surprised as well. Any further explanation? This is different from my previous version and while not "bad", it is an extra click in my workflow.
    Thanks!
    Phil

Maybe you are looking for

  • Navigating in the 12 periods

    Hello, I have a problem. How can I navigated by all periods (12 periods) of a year with my characteristic ZMV_TC  that have only a validity period (0datefrom and 0dateto)? I don't want to insert the Master Data for the diferent periods, because I wil

  • Exchange rate from PO to migo

    Hi, I need to take de exchange rate for a currency in the moment i use migo transaction not from PO. It's this possible using customizing??? Thanks

  • Reducing size of Image or byte array

    Hello, I am making a program where i have to send user's screen to another PC, So I use class Robot to make a screen capture and send it via UDP. However this is still too slow, my question is: is there some library to compress the size of byte array

  • Custom attributes on endpoints objects in ISE 1.3 ??

    Hi, I would like to create custom attributes on an endpoint object - just as it is possible to do on user object. How do I do that ? Can I use the REST API for that - or is that not supported ? Best regards Tue

  • App Could Not Be Found

    I recently restored my Ipod and when I did a number of Apps disappeared off of it. I can still see the apps in my library on itunes, but when I try to reinstall them it says the "App could not be found. I try to redownlaoad them from Itunes store, bu