How do I get a new start-up disc for my G5?

Well, I lost my original start-up disc for my G5; how do I get a new one, or maybe download a disc image?
I need a new one to address the issues I've been having (monitor blinking off and on, slowness, pinwheel appearing often, no error messages, burner not working, burner not letting discs out), so I want to archive and re-install.

eBay.

Similar Messages

HT201304 I have forgotten my "restrictions code" passcode. How can I get a new passcode? Thanks for your help. Paul

I have forgotten my "restrictions code" passcode. How can I get a new passcode? Thanks for your help. Paul

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

How can i get a new icloud Add-in for Outlook

My icloud refresh button is gone. I have checked my Add-ins and the icloud Add-in is gone as well. Even when i choose the "disabled items" under manage Add-ins, it does not appear. How do i get a new icloud add-in. I have already uninstalled and reinstalled icloud.

Click here and order replacements. Alternatively, if the machine shipped with 10.6.2 or earlier, you can buy a Mac OS X 10.6 DVD from the online Apple Store, but it won't contain iLife or the Apple Hardware Test.
(122924)

How Do I Get a Newer Version Of Safari For a iMac G3

Ok So last Night I Finished Instaling Mac OS X Panther and Updated it to 10.3.9 it Was At 10.3.5
And Now Safari Is At Version 1.3.2 So How Can I Get Safari Updated to 3.0 or Safari 4
4 Is What I Really Want.
So How Could I Update Safari 1.3.2 to Atleast 3.0 or 4.0
Below it says 10.3.9 it Wont Let me Add the 2nd Half of the Picture
And BTW This Was Taken on My iPhone 3GS So Thats Why it is Not The Best Quality and Because the iMac G3 Has a CRT Screen Thats Why There are the Lines
Answers To This Question Would Be Amazing!

Safari 1.3.2 is the newest version for Mac OS X 10.3.9. You need to upgrade to Mac OS X 10.4 to get a newer version; a G3's maximum OS is 10.4.11.
(62542)

I just purchased a new in factory sealed box ipod 5.5. I removed all from packaging and charged overnight. The battery won't hold a charge. How do I get a new battery under warranty for this NOS item?

I Just purchased a NOS ipod 5.5 brand new in factory sealed packaging from an apple dealer. I charged the unit overnight but the battery will not hold a charge. I read the Apple warranty and expect Apple to honor the warranty to the original end user purchaser (me). however I do not want to give up this iPod for a newer model because I love the sound from the Wolfson board. The newer iPods sound horrible and give me headaches. Does Apple still provide batteries for the 5.5 30 gb iPod? Or am I out of luck due to obsolescence? Thanks in advance!

I feel your angst, especially, knowing that Apple has become the most profitable company in the world, by selling us products that breaks down when the warranty run out, and crap service staff, who doesn't know anything about the iPod Classic, except offer to sell us refurbished iPod classic.
You can get the Battery replaced at 3rd Party store for less.
BTW, (most contributors might not agree with me) if you recharged your iPod everyday, it will be dead just 2 months after the warranty expires. My logic, the iPod battery will last for about 400 recharge cycles according to Apple Specs listed below
Charge Cycles
A properly maintained iPod battery is designed to retain up to 80% of its original capacity at 400 full charge and discharge cycles
So if your lifestyle is plugin in to car Audio dock, while driving, and plug in to home stereo while home, then it is 2-3 charge cycles per day.
But then you cant do anything about it, just switch to another media player.

How do i get a new e mail address for my old 4s for my spouse to use

i want to register my 4s to my spouse how?

What exactly do you want to do ? If he doesn't already have an email account then you can create one via http://gmail.com or http://hotmail.com etc
To create an iTunes account : iTunes: How to set up an Apple ID within iTunes
Or without giving credit card details : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method
To use that account on the phone, log out of your account on it by tapping on your id in Settings > iTunes & App Store and if logged into iCloud then Settings > iCloud > Delete Account (Settings > iCloud > Sign Out if it's on iOS 8)
To register it to her account, log into your account and remove it : https://supportprofile.apple.com/
And he can then log into her account and register it to it : https://supportprofile.apple.com/

Just got a new 5c--the apps stopped downloading cause I wasn't connected to wi-fi. How do I get them to start downloading again?

Just got a new 5c--the apps stopped downloading cause it wasn't connected to wi-fi. How do I get it to start up again?

If you're downloading them as part of restoring and iCloud backup, sometimes turning the device off, then back on will restart the download. Otherwise, you may need to stop the restore (Settings>iCloud>Storage & Backup, Stop Restoring), then erase the phone and restore the backup again.

On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed

Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You

Hey guys, my screen is dead. How do I get a new one?

I looked on eBay and found a bunch of displays, but there are so many, I don't know which one to get!
so I need a little help identifying my mac or the part number, if possible. I think it's a Macbook l,l.

Re: Hey guys, my screen is dead. How do I get a new one?
You buy one and install it or you pay an installer to do it.
I looked on eBay and found a bunch of displays, but there are so many, I don't know which one to get!
Are you confident (in that case) that you can do the repair yourself? Perhaps you should let a professional select a screen and install it for you.
Laptop parts all have a part number - you should start there. Here is a typical part number location: http://www.screentekinc.com/lcd-removal-instructions_en,macbook,diagram3.shtml
Try speaking to a repair shop like techrestore, for example, for further details - http://www.techrestore.com/xcart/home.php?cat=273
I need a little help identifying my mac or the part number, if possible. I think it's a Macbook l,l.
All 13" Mac Books have the same screen which measures 13" diagonally. If you need to examine other size/era Apple notebooks look here http://www.apple.com/support/hardware/
If you can plug an external display into it then click the top left Apple icon and select "About This Mac" for CPU identifiers etc.
EDIT
I almost forgot - there are great service manuals available from here:
http://www.powerbookmedic.com/xcart1/home.php?cat=258
Message was edited by: NA Smith

My Itouch doesnt have a wifi address anymore :\ how do i get a new address?

how do i get a new address?...also it wont let me into the wifi section in the settings...and it liek charges really fast when i was online b4 it lost it and it wasnt being charged and it like lost the charge after awhile and right now it got full charge somehow and nwo it is down to 20% and it is pluggedinto my computer..................this all started after i went into one of the apps for it and it got bricked for lie ka couple minutes......as in the site for the apps that APPLE APPROVES...any help? plz lol
edit: also i have alredy restored it and reseted settigns and al lthat crap and when ever it turns off it restarts automatically and i dotn have a case on it and i am nto touching the power button now is anythign else....this is gettign me mad
Message was edited by: bgood99

ok here it is in simple terms ok. I didnt jailbreak it i used one of the applications that apple has on its site for the updates. It bricked my itouch for like a couple minutes. It started charging w/o a charger being plugged into it and when a charger was it would lose charge. It also turned back on as soon as i turned it off. Now it will not let me into the Wi-Fi area in settings as in the button for it is grayed out and reads No Wi-Fi in the about my itouch it shows it has no Wi-Fi address. How do i get another Wi-Fi address??? everything else works fine. What is wrong with it and i have already restored it using Itunes, reseted it through settings and i can not let it run dead because it will not run out of battery becuase it will not run dead with the charger in it because it wont let it past 10% and with it off( the charger off of it) the battery charges...So what can I do to GET A NEW WIFI ADDRESS IS ALL IM ASKING IS THAT SO HARD???? THE REST IS EXPLAINING MY PROBLEM OK????
Message was edited by: bgood99

I have changed id and password yet old id still comes up and tells me my id or password incorrect. How can I get my new id to come up.

I recently changed my email address (id) & password yet when I go into iTunes or to purchase Apps my old id comes up and advises my id or password is incorrect. How can I get my new id/password to operate these sites?

the appleID is the connection between the device and icloud and what apps and media itunes store see that you own
if you change appleID you start from scratch
settings->store->appleID is where you remove what appleID your ios device see as yours

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

How can I get a new copy of the Voicemail app for my LG Spectrum?

How can I get a new copy of the Voicemail app for my LG Spectrum? It no longer works....the screen say Loading please wait....the
!Visual Voice Mail - A Visual Voice Mail error has occurred. Please try again. OK I've tryed several times with the same message. I've
deleted the app from my screen and replaced it from the Apps Library....still the same message.
I cannot find an answer on MyVerizon. Any ideas?
Thank you,
Dee

OK, at least 3 is working.
I don't know how you have a Tape Recorder icon on your Home Screen. I cannot add one myself. But, I am running Holo Launcher in replacement of the default LG "Optimus" User Interface. It's much better in my opinion.
Try long pressing the icon and select Edit and maybe you can change some attribute of the icon.
Another thing you could do, is long-press an empty area of your desktop, to add an icon. Select Shortcut, then Select Contact, and scroll through your contact list and choose the contact that you added for *86.
You realize if you have voice mail you haven't heard, there is a tape recorder icon in the notification bar, which you touch and pull down, then press it to dial voicemail.
If that functionality doesn't work, you MIGHT want to consider doing a factory data reset on your device, but that is going to nuke all your personalizations and cause you work to set up again.

How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro?

How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro? Or am I SOL?
Hardware Overview:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro6,1
Processor Name:    Intel Core i7
Processor Speed:    2.8 GHz
Number of Processors:    1
Total Number of Cores:    2
L2 Cache (per Core):    256 KB
L3 Cache:    4 MB
Memory:    8 GB
Processor Interconnect Speed:    4.8 GT/s
Boot ROM Version:    MBP61.0057.B0F
SMC Version (system):    1.57f18

You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

How do I get a new start-up disc for my G5?

Similar Messages

Maybe you are looking for