How do I get a small (Sony handycam) DVD out? from my iMac

In order to see if the iMac would import Sony Handycam DVD (small size) I put in such a small DVD... it's still there, it not recognized, and it will not come out. What can I do?
/Lars

This happened to a family members macbookpro. A mini-cd inserted, couldn't be mounted or ejected by the drive.
I cut a rectangle from a cereal box about two inches wide and 6 inches long. About an inch and half from one end in the middle I cut a notch and bent it down a little.
I................I
I................I
I.....I__I.....I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I_________I
I then inserted it slowly into the drive notch down and slowly pulled out. I did this few times and caught the mini-cd and removed it. The drive has worked flawlessly for several years
A few days after this happened I was in BestBuy and an Apple rep was there displaying new Apple products. I asked him about it and he said they have a tool that vacuums it out.

Similar Messages

How do I get all my contacts and my bookmarks from my iMac to macro

How do I get all my email contacts and bookmarks from my Imac to Macpro??

In Mail go to Mailbox > Export Mailbox on the other mac just import your Mailbox.
If you want your contacts, Are they all in your Address book? if they are just go to File> Export in Address book. and then again File> Import on the new mac
Same thing for the bookmarks (Safari): File> Export Bookmarks ...
Hope that helps!

How do i get my number files on my iPad from my iMac computer?

How do I now get my Number 09 files up on my ipad so the will sync in the cloud?

If you are running OSX 10.5.7 you cannot use iCloud on your Mac since one of the requirements is that the Mac needs to be running Lion. However, if you are really running 10.5.7 - you can't sync the iPad either since the minimum for that is 10.5.8.
I will assume that your tagline is incorrect and you can at least sync the iPad with your Mac. And .... you need to have Numbers installed on the iPad so I will assume that you have that installed as well.
The text below is copied from the kb article below.
iWorks for iOS: About iTunes File Sharing
Copying Numbers files from your computer to the iPad using iOS file sharing (Title changed for Numbers)
Connect your iOS device to your computer using the included Dock Connector to USB cable.
Open iTunes on your computer.
Select your iOS device from the Devices section on the left side of iTunes.
Click the Apps tab and scroll down to the bottom of the page.
Note: If you do not see the File Sharing section shown in the image below, your iOS device does not have any apps installed which support File Sharing, such as the iWork for iOS apps.
Under the File Sharing section, you should find a list of apps currently installed on your iOS device that use File Sharing (such as Keynote, Pages, and Numbers for iOS). Select an app to view a list of the files associated with that app on your iOS device.
You can drag and drop files into the Documents list to send them to the app on your iOS device. You can also click the Add button, locate the file or files you want to send from your computer, and then click the Choose. The files you select will be copied to the app on your iOS device immediately. Select only files that are supported by the iOS app. Once you’ve copied your file(s) to your iOS device from within iTunes, open Keynote, Pages, or Numbers on your iOS device.
Navigate to the Document Manager screen
Tap the plus icon in the upper-left corner, and then tap the iTunes icon:
This will open the "Copy from iTunes" window:
Tap the file you want to copy and the document will automatically be added to the Document Manager and open.
(Any compatible file that you’ve copied to your iOS device using File Sharing will be listed in the "Copy from iTunes" window. If the file is not listed, confirm its file type is compatible with the iWork app.)
Back to my own words now.... You can sync these documents to iCloud using your iPad as long as you set it up in the iCloud settings. If you make changes to this document on the iPad - it will not sync back to the Mac via iCloud. You can sign into your icloud.com account on the Mac - click on iWorks - click on Numbers - select the file - and download the file to the Mac to work on it again - but you can't upload it again unless you are running 10.7.2 on the Mac. You will have to get the file back onto the iPad via file sharing as described above.

Getting video from Sony Handycam DVD 403

Hello everyone.
I'm hoping somebody has experience getting video from a Sony Handycam DVD 403 into iMovie6. I'm having troubles getting what I expect to happen to actually happen.
I hooked up my Handycam to my PowerBook which the OS recognized as a DVD recorder. The disc I had in the camera at the time had about 20 minutes of video stored in a unfinalized state. Finder showed an empty folder.
I tried entering iMovie and seeing if there were any tools in there that would help me but I couldn't find any. Nothing I did would show me the various clips that made up the 20 minutes of footage.
I was ultimately able to get the video in a round-a-bout way by Finalizing the disc, extracing the resulting VOB from DVD, converting it to mpeg4 with VideoLAN, and then adding it to my clips in iMovie. However, this has two aspects I don't really care for:
1) It took a couple of hours to do this. (I wasn't paying attention the whole time, but definately more than 90 minutes and less than 180 minutes).
2) It made one large mpeg4 file. I would rather have had multiple smaller files that were originally on my camcorder.
Does anyone have any tips or links to help me get the video straight off of the camcorder and into iMovie without resorting to VideoLAN and mpeg splitters (I haven't tried any mpeg splitters yet, but I'm guessing that is what I need to do to get my video clips into reasonable sizes).

Thank you for the reply.
This makes me sad, of course. When I bought the camcorder 6 months ago I had know real idea what I'd be using it for... just knew I wanted to record family gatherings, etc and have a DVD to watch when I was done. If I had planned ahead a bit more I would have got advice from the message boards first.
Until I can find somebody willing to buy this device from me I guess I will have to make do with the long way around.
Mac OS X (10.4.4)

How can I get a small window to open when a link is clicked (AS2)

Hi i,m developing a HTML site and used one animated flash button(AS2) I want a small sized window to open when a user clicks on a button.
The window will contain information that i want to display.It dosnt require a normal 800x600 window to open. I just want a 1/4 size of 800x600 etc. Is this possible and if so how.
I havnt done this before
Thanks
Manoj

HELLO NED,
I WAS RECEIVING MANY MAILS FROM YOU, BUT I DON'T UNDERSTAND WHY DOESN'T RELATED WITH MY PETITION, I SEND
TO YOU AGAIN MY QUESTION, AND IF YOU CAN HELP ME I APPRECIATED VERY MUCH LET ME KNOW.
THIS IS MY QUESTION....."ABOUT DATAGRID AS3
Hello Ned, I appreciate very much your soon answer, I believe you have understand me, but how can I do that? could you give some help? This is part of the code and this is the function that I use
var url: String = "xmls/rests.xml";
var req:URLRequest = new URLRequest(url);
var myLoader:URLLoader = new URLLoader();
myLoader.addEventListener(Event.COMPLETE, completeHandler);
myLoader.load(req);
function completHandler(event:Event):void {
       var myLoader:URLLoader = event.currentTarget as URLLoader;
       var xmlDP:XML = new XML (myLoader.data);
       XML.ignoreWhitespace = true;
       dp = new DataProvider(xmlDP);
       dp = sortOn("name", Array.CASEINSENSITIVE);
       dDg.dataProvider = dp;
       aDg.addEventListener(Event.CHANGE, changeHandler);
       function changeHandler(event:Event): void {
            var thisItem:Object = eve.target.selectedItem;
            descripTa.text = thisItem.description;
            aUI.source = (thisItem.image);
            preloader_mc.visible = true;
My intention is that when a button from a main (swf) loads the swf it displayed the first selected item with a image (UILoader) and the description (TextArea)
Thanks in advance Ned
Joselyn             .................."
THANKS AGAIN NED
REGARDS
JOSELYN
Date: Thu, 13 Oct 2011 07:49:02 -0600
From: [email protected]
To: [email protected]
Subject: How can I get a small window to open when a link is clicked (AS2)
Re: How can I get a small window to open when a link is clicked (AS2) created by Ned Murphy in Flash Pro - General - View the full discussion
Look at the Methods section and choose whichever suits your needs, the first one listed does not.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969302#3969302
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969302#3969302. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How can i get the small sircul contact pic when I receive or make calls instade of the full screen pic ?? Cannu help me plz

How can i get the small sircul contact pic when I receive or make calls instade of the full screen pic ?? Can u help me plz

Settings you make in ACR for a Raw file are written to the separate XMP side car file. (The Camera Raw preferences has this set by default and to my opinion it should stay so, but the other option is to save them in a central database)
However, opening the same file in ACR and make new adjustments the previous settings are overwritten by the new ones. You can save them separately but that would be a hell of a job. If you want to be on the safe side you should make a proper back up of the whole folder (be sure to have the XMP files included, by default those are hidden files in Bridge) before someone else starts playing with the settings. However, you can always go back to the default version using the option in the little menu icon next to the name op f the panel (first panel is Basic). click on the icon and from the provided menu choose 'Reset Camera Raw Defaults' to go back to the originals.
I don't use jpeg in ACR very often but I believe ACR settings for jpeg and tiff are written in the XMP data in the file itself instead of a separate XMP file. You can revert to default or make new settings that also overwrite the older settings.
Making adjustments in ACR shows the results in Bridge (it uses the XMP data for the preview) but to make it visible in other apps you also have to save them in Photoshop itself to make the changes persistent so that mail and print reflect your settings.
So basically, let her play with the files and either chose the option to save the files (bottom left in ACR Window and choose the wanted provided options or open and save them in Photoshop to get the proper result. And if you want to be on the safe side let here use her own copies and keep the originals to your self.

Sony Handycam DVD camera

Seasons Greetings to everyone
I received a Sony Handycam DVD camcorder today. It is very nice (from what I can see - it's my first) but I don't see a way to download the data on the disc to my iBook for use in iDVD. It uses the mini-discs and I know I can't use them in my computer. I thought there would be a USB cord to attach between the two devices (like I have for my digital camera) but there isn't one.
I really want to be able to use the editing features of iDVD. Do I need to get a new camera, a new cord or am I just missing something!!??!!
Thanks - and goodnight!

Hi Aunt Kack:
That is a nice camera, but it is not the camera you want if you are using iDVD or iMovie.
You will need to convert your footage into a format that the Mac can use.
Using Mpeg (DVD) footage
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
some helpful tools:
MPEG StreamClip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
Apple MPEG2 PlayBack Component:
http://www.apple.com/quicktime/mpeg2/
DVDxDV
http://www.dvdxdv.com/
So, really, I would try to return it and get a DV camera that uses a firewire.
Sue

Sony Handycam DVD-R 60 Min 2.8 GB DVD

Will a Mac play back video from a Sony Handycam DVD-R? 60 Min - 2.8 GB DVD? Will the mini DVD work in the HL-DT-ST DVD -RW GH41N Atapi DVD drive of a Mac Pro without getting stuck?
Thanks,

Will a Mac play back video from a Sony Handycam DVD-R? 60 Min - 2.8 GB DVD?
If the Mac supports that format. If it's a standard video DVD except for its physical dimensions, yes.
Will the mini DVD work in the HL-DT-ST DVD -RW GH41N Atapi DVD drive of a Mac Pro without getting stuck?
Mini disks can be inserted into a drive with a carrier tray safely. If put into a slot-loading drive, they may get stuck.
(52373)

How do I get my iPad to reflect the folders on my IMAC

How do I get my IPAD to reflect the folders on my IMAC and so when I save something to a folder it gets saved on my IPAD too!
thanks
tim

In iTunes with your playlist shown in the correct order, right-click on the playlist name in the side-bar and click Copy to Play Order. Enable the side-bar with CTRL+S if necessary. Sync. Note also that the column you are sorting on should have the small triangle pointing upwards, otherwise the songs will play in the reverse order. You may also find that you need to first remove, and then add back the playlist to the device if syncing doesn't update it properly. See this post for more.
tt2

How do I get rid of the auto signature "sent from my iPhone" when I create a new message?

how do I get rid of the auto signature "sent from my iPhone" when I create a new message?

Settings -> Mail -> Signature and edit it to whatever you'd like.

How can i get the content of JTextArea with out loosing Indentation.

I am developing one mail sending application. I am getting mailid , from address, mail body from one Swing. In one JTextArea i am typing i have typed some matter. When i call the content of JTextArea using
jtx.getText() method, i am getting all the content as one paragraph. That means there is no indentation which was there in TextArea.
Please provide me some solution how can i get the content of JTextArea wiht out loosing indentation.

And it was you who asked the question!

How do I get games and music on my phone from iTunes

How do I get games and music on my phone from iTunes

See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/

How do I get my ipod to play a playlist from reverse order? (Start with recently added song instead of first added)

How do I get my ipod to play a playlist from reverse order? (Start with recently added song instead of first added)
So I'm adding new songs to a very old playlist? Is there anyway that when I add them, they automatically go to top of playlist? How about getting one song to the top of a playlist. That drag to arrange function is very annoying because it is slow and the playlist does not scroll up very well on a PC.

Make a new playlist by pressing the little plus button at the very lower left corner of iTunes. An new playlist will appear in the Source pane called "untitled playlist". While the name is highlighted, you can change it to whatever you want. Drag all of the tracks from all the albums that comprise a single book to that playlist. Sync that playlist to your iPod.

How do I get back to my basic start page from any ...

How do I get back to my basic start page from any other page? There should be a one click link but I can't see how to do it. Apologies for illiteracy. Like say from this help page, how can I get back on skype and make a call?

There is a "Home" button below search option which will take you to the main page.

How do I get Calendar to suggest name and address from Contacts on my iPhone 5 in iOS 8?

How do I get Calendar to suggest name and address from Contacts on my iPhone 5 in iOS 8?

Restore it from your backup.

How do I get a small (Sony handycam) DVD out? from my iMac

Similar Messages

Maybe you are looking for