How do I get a table in Pages to extend across pages?

Every time I create a table in Pages, it's fine until it needs to continue to the next page. The table does not go to the next page it just disappears. Help!

Cells will not split in Pages.
You should be able to organise your layout without using tables, not that tables are bad pre se, just that they are not an option here.
If this is important to you, try LibreOffice [free].
Peter

Similar Messages

How do you get a table to flow onto the second page?

Since upgrading to Yosemite, I cannot figure out how to get my table to continue on to the second page. If you look at my screenshot, you can see that my table was so big so the whole thing was moved to the next page. I want it to remain on the 1st page and have additional rows continue on to the second page. In the previous version of pages, the column titles would also appear on the second page. Thank you very much for your help.

Hi F.AD.;
Go to View > Show Invisibles (Shift+Command+I).
This will display Paragraph marks (¶) at the end of each paragraph.
Delete the paragraph mark (¶) that is at the end of the paragraph before the table, i.e. just between the table and the paragraph.
This will bring the table surely just beneath the paragraph (text), I suppose.
Hi BePositive26;
You didn't mention whether my suggestion made easy to solve your problem.
Regards,

We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 version

We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 versions. I am not able to find it in Oracle support.

My guess is you want to upgrade HR8.3 to 9.2 - and that is not one jump upgrade. You will need to go HRMS 83 to 90
(PeopleSoft Enterprise HRMS 8.3x to 9.0 Upgrade (Doc ID 747333.1) and then 90 to 92 (PeopleSoft Human Capital Management 9.0 to 9.2 Upgrade Home Page (Doc ID 1536087.1)
Each these MOS pages contains the Demo to Demo Compare Reports that show the data structures changes between the releases.
Hope it helps.

How do I get the table of contents to toggle? I opened it while reading one book I had checked out from my library, but it is still open when I start another book. I am using Adobe 4 and Windows 8.1 on my PC.

How do I get the table of contents to toggle? It has remained open since I opened it while reading two books ago. Thanks for the help.

Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

Error 404 - how do I get rid of this message on my Google page when I open Safari?

How do I get rid of error 404 on my Google page when I open Safari?

Safari - Reset Safari - choose all options and reset Safari.
If that does not work then check to see what Safari extensions you have installed, one or more may be creating a problem.
Another possible fix is restarting in Safe Mode which clears some caches, one or more may have become corrupt. To restart in Safe Mode simply hold down the Option key when you hear the startup tone until a progress bar appears. Then test Safari and then restart normally.

How do I get my HP Photosmart 7960 to print the page numbers on a multi-page project?

How do I get my HP Photosmart 7960 to print the page numbers when printing a multi-page project?

Hi,
This has most likely nothing to do with the printer but with the program you are using to print. For example Word has a setting for this, so let me know which program and I might be able to check for you.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Trying to split a table (so I can format across pages)

Hi, I'm fairly new to a Mac and to using Pages 09 (I picked a great time to change systems when writing up something important!)
How do I get a Table to split (as you can easily with MS Word) so that I can easily format my tables and text across multiple pages? At the moment I either have the title of a cell and then the text linked to it split across two pages - which looks silly - or I have to insert returns into the cell above it so the heading of a cell and it's contents both appear on the next page - but which then also makes the previous cell look silly with so much empty space.
I can find all the options for splitting cells into more rows or columns but not an option to just split a table. Am I missing something or have Apple missed something?

HavanaNights wrote:
. Am I missing something or have Apple missed something?
You missed nothing and Apple missed nothing too.
The engineers are free to make the choices which they think beeing the best ones.
It's really easy to achieve your goal.
Activate the mode "Preview"
The slider which is at the bottom of the window allow us to adjust the table width so that it fits in the page.
In the Table inspector, we may adjust the rows height so that the wanted number of them appear in a single page without the holes generated by empty rows insertion.
Oops, I wrote my response for Numbers, not Pages.
but what I wrote may be done in Pages too.
For the width, we have no slider but we may adjust it thru the Inspector of Measures.
For the number of rows same scheme in Pages and Numbers.
Jean-Marie … was inserted in the table to illustrate a script which may easily remove unwanted rows and, from my point of view, this one was unwanted
Yvan KOENIG (VALLAURIS, France) jeudi 25 mars 2010 19:38:48

How Can I Get My Ratings and Playlists to Mirror Across Multiple Accounts?

I'm sharing my music across two accounts on my Mac by placing my iTunes folder in the Shared folder, with an alias to that in each User's Music folder. It works fine, but the User of the other account would like the benefit of all my Playlists, and would especially like to have all My Ratings.
How can I get My Ratings and Playlists to mirror across multiple accounts? I would've thought simply importing the <iTunes Music Library.xml> file would do it, but since we're both using the same iTunes folder, we must already be using the same XML file, right?

The answer about where the ratings, etc. are stored is not an easy one, but the best I can figure is that it is a combination of the iTunes Music Library.xml, the iTunes Library file, and the com.apple.iTunes.plist. Apparently, the com.apple.iTunes.plist (in the under User/Library/Preferences) references the other two files. If you close iTunes, take the com.apple.iTunes.plist out of the user's Library/Preferences folder and then reopen iTunes, you will see that all the ratings, play counts, etc. (track information) will have disappeared. If you close iTunes, replace the com.apple.iTunes.plist, then reopen iTunes, the track information will be restored. The playlists, which are not part of the track information, seem to function independently of the com.apple.iTunes.plist, but if you share the whole iTunes folder across accounts, this should include the playlists. When I back up my iTunes library to another folder, I back up a copy of the current com.apple.iTunes.plist from my User/Library/Preference folder. I think that the way this works across multiple accounts is that the com.apple.iTunes.plist reads track information from the other files in the iTunes folder, because if you throw away the com.apple.iTunes.plist from one user account, it affects all the other user accounts sharing the same iTunes folder.

How can I get rid of that irritating contact/favorites across the top of the home screen?

How can I get rid of that irritating contact/favorites across the top of the home screen?

Actually, that's not on the Home screen, it is on the multitasking or App Switcher view so only shows up when you enter that mode (so I'm not to clear as to why it is so "irritating", but whatever).
Settings app > Mail,Contacts,Calendars > scroll down to CONTACTS section] > Show in App Switcher

How do i get this table stuff to display in middle of browser ( page ) ?

hiya. I used to have dreamweaver when it was macromedia. things have certainly changed since then. Now I'm using that ms expressions thing ( free now ? ) and made this
http://rodneybauer.com/index.html
how do I get the stuff to go to the middle of the browser window ( page ?? ) .
If you look at source code you'll see its like REALLY basic and that I am a website idiot. any help please email me at rodney at rodneybauer dot com cause I dont get notices for posts and threads . thanks a ton !

Add the highlighted
<style type="text/css">
body {
width: 1070px;
margin: auto;
.auto-style1 {
text-align: center;
.auto-style5 {
border-width: 0;
.auto-style6 {
text-align: left;
</style>

How can we get the table name...

Hi All,
How can we get the actual table name for an argument if its datatype is %ROWTYPE.
For Ex :
function ACCOUNT_UPDATE (account_no number,
person person%rowtype,
amounts dbms_describe.number_table,
trans_date date)
return accounts.balance%type;
In the above function 'ACCOUNT_UPDATE', for argument person the datatype is 'person%rowtype'.
Is there any way to get the name from Data Dictionary tables.
I tried using All_Arguments and DBMS_DESCRIBE, I can able to get all the individual fields of %ROWTYPE by I could not able to know the exact table name thru the DD.
my requirement is dynamically I need to declare a variable for the argument datatype.
Your help is highly appreciated.
Thanks

hi vinay,
this is the easiest way to find the tablename of a particular field.
t.code:XD01.
enter.
select the kunnr field.
press F1.
the top of the screen u will get 'Technical setting icon.
select that one.then u will get tablename,fieldname,parameter id also.
if helps give the rewards.
regards,
akash.k

How do I move a table with radio buttons to another page?

I created a document in Word, converted to PDF, added a page (which was created in Adobe Forms Central, only way to get a table with radio buttons - see below for example).
The issue I have is whilst using the Trial of Adobe XI Pro I was able to move this table up a page and place it under the header. Now that the trial has run out I cannot complete this task with other documents.
I started to edit using LiveCycle but it won't let me move the table.
We have Acrobat X Pro but when I go to edit, it directs me to edit in LiveCycle. I have tried moving the table using all of these programs. Can anyone help/guide please?

Thank you for your reply. I am new to editing a pdf and using these programs. I have subscribed to Acrobat XI Pro. When I try to edit the document it directs me to LiveCycle. I cannot move the table in LiveCycle. It won't let me, and I cannot make changes in XI Pro as I did in the trial as it directs me to edit in LiveCycle. Am going in circles.

How do I get Firefox 4 to show the last several pages visited instead of only going back one page at a time? It used to show last 10 or so pages with a down arrow. The down arrow is gone.

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/816789]</blockquote><br>
In Firefox 3.6 the back arrow button to go back a page also had a down arrow button that would let you jump back multiple pages. How can I get that to show in Firefox 4?

The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

How can I get my Indesign script to apply to all pages in the document?

My script (java) shown below will only apply to the first page of the document. How can i get it to apply to all pages of my document? What am I missing? Thanks.
scirpt:
myDocument = app.activeDocument
with (myDocument.pages.item(0).marginPreferences){
columnCount = 1;
//columnGutter can be a number or a measurement string.
columnGutter = "0";
bottom = "0"
//When document.documentPreferences.facingPages == true,
//"left" means inside; "right" means outside.
left = "0"
right = "0"
top = "0"
inside = "0"

Hi,
You have to iterate through all pages.marginPreferences:
var
myDocument = app.activeDocument,
allPagesMaPref = myDocument.pages.everyItem().marginPreferences,
curPageMaPref;
while ( curPageMaPref = allPagesMaPref.pop() )
with (curPageMaPref) {
columnCount = 1;
//columnGutter can be a number or a measurement string.
columnGutter = "0";
bottom = "0"
//When document.documentPreferences.facingPages == true,
//"left" means inside; "right" means outside.
left = "40"
right = "0"
top = "0"
inside = "0"
Jarek

When I go to a web page that page appears upper left, filling half of the screen. I have to manually go to View in the menu bar to get it to fill the page each time. How can I get my Mac Mini to go to full page automatically when I visit a web page?

When I go to a web page, that page appears upper left, filling only half of my screen top and bottom. Each time I have to go to the menu bar View and go to full page. How can I get the web pages to display in the full screen automatically??? This just started happening.

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

How do I get a table in Pages to extend across pages?

Similar Messages

Maybe you are looking for