How do i get a xy graph to plot more points?

I'm using the Build xy graph express in Labview 7.0 and I was just wondering how one could increase the amount of points plotted on the graph. Right now, the graph will just plot up to 100 points and then go crazy and go back to 0. I would just like to know if there's any way to increase the amount of points that could be plotted on the graph.

An xy graph will plot exactly the number of points that are in the x and y array. That's assuming that you have the x scale set to autoscale. And, by default, each time the function is called, the graph will reset. You can select properties and change this. You don't mention where you're getting the data. Stick a probe on the input to the express VI and check the size. You can also provide some details on what you're doing or post your VI for someone to look at.

Similar Messages

How can i get the average graph?(DIAdem)

hi,
How can i get the average graph(2D-graph) of 10 measures?
Can someone please help me?
THX!!!

Hello Charleen!
If you want to do it programmatically have a look at the ChnAverage command in the help (see also StatBlockCalc for advanced calculations). Interactive you can use the statistic functions in the ANALYSIS device.
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?

How do I get the text to flow throughout more then one page.

Hello,
I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
I could always send the file to someone to see if they can figure it out.
Thank you,
Natalie

Thank you so much !
but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
Natalie
Date: Wed, 12 May 2010 07:53:12 -0600
From: [email protected]
To: [email protected]
Subject: How do I get the text to flow throughout more then one page.
Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
Thanks
Srini
>

In chrome I'm getting green double underline hyperlinks to ads. How can I get rid of this without adding more junk to the computer?

I have both safari and chrome, because I'm used to chrome. The only extension I have is Google docs. I started getting green double underline hyperlinks to ads. How can I get rid of this without adding more junk to the computer? People suggest programs to do it, but how do I know they won't make it worse?
Is someone from Apple here and can answer?
Thanks!

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I have an Ipod Touch that is in recovery mode right now. I hooked it up to iTunes, and followed the steps to restore it, but it will only restore about a quarters worth of the bar. How do I get it to load past that certain point?

I have an Ipod Touch that is in recovery mode right now. I hooked it up to iTunes, and followed the steps to restore it, but it will only restore about a quarter of the bar. How do I get it to load past that certain point?

- Reboot the computer
- Try another USB port and cable
- Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How do i get my i phone to show more than just the apple symbol?

how do i get my i phone to show more than just the apple symbol?

Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.

How do I get the statistics express to read more than 10 segments when reading from a .lvm

I have tried 2 ways of doing this. I had an for loop set up with a "Read labVIEW Measurement FIle" then a xy chart to plot the 2 measurements vs. each other. The chart works and will plot everything great but the "Statistics" express will only take 10 samples at a time and will keep redoing the statistics for each subsequent segment of 10 samples. I tried to change this to a while loop but then the same thing happens with the stats and the xy chart does not graph. How do I get the stats calculate for the entire file?

Richard,
Thank you for contacting National Instruments. I think I understand what you are looking to do here, but it might be easiest for myself and others to help you more specifically if you post a screenshot of your code, or your actual VI. However, I looked into trying to achieve something similar, and used a loop structure to bring the information in from a file. Then, outside the loop, I used the Statistics Express VI from the Mathematics palette to obtain some statistical values. What type of statistics are you looking to receive from this program?
Jason W.
National Instruments
Applications Engineer

Express XY Graph Multi-plot Cursor point

Hi,
In mixed signal graph >> Property >> Cursors Tab >> Enable Allow dragging here if we select Multi-plot, it will show X scale and all Y-scale value in Cursor legend.
How can I get these same options in Express XY Graph?
Sivaraj M.S
CLD

You need to use a property node and find the curser position and then plot those points in a seperate xy plot (only it will be one point instead of an array). You will still have to plot it as an array of one point.
Tim
Johnson Controls
Holland Michigan

How can I get a "still" graph of my measured values?

As a student working on my thesis I have to use LabView7Express to acquire data from surface measurement (using CCD laser sensor).Once the measurements have been acquired, I need to dispay the surface hight evolution on a graph. So far I have only been able to view moving, real time graphs... Can anyone tell me if what I need to do is possible and if it is, how to programm it?
Thanks for your help!

Check the attached file. Basically, you use the invode node to "capture" the control and save it to file or displayed to a picture control.
Joe
Attachments:
Save_Still_Graph_to_Image.vi ‏35 KB

How do I get an XY graph to auto append data?

"Here is my problem. I have a Visual C program getting info from a user. That info is appended to a log file everytime the user hits "enter". Now, my labview program has to display the data in a graph, but I only want to see the 30 most recent points. I am using Labview 6i profesional and any help would be veru much appreciated

Okay, what I had to once was read a file that was updated by a different program. I used a state machine where one state would read the entire file at some interval. If you wanted, you could also trigger a file read when the size changes. The contents of the file went into arrays using something like the Spreadsheet String To Array function. The last x number of points were extracted with the Array Subset function. The output of the Array Subset was fed into a shift register. In another state, I used the shift register to update the XY graph. What I've done for upper and lower limits is to set a couple of cursors to those values and display them on the graph.

How do I get an XY-graph to auto append?

Here is my problem. I have a Visual C program getting info from a user. That info is appended to a log file everytime the user hits "enter". Now, my labview program has to display the data in a graph, but I only want to see the 30 most recent points. I am using Labview 6i profesional and any help would be veru much appreciated.

You will probably have a better chance of getting this answered if you post this question in LabVIEW>LabVIEW General.

How do I get access to the parent window native pointer?

Under Windows:
I need to get access to the native pointer for an applications frame (in this case a JFrame).
I need to do this because I want to display property pages in a native dialog box. These property pages are supplied by driver software, are themselves native, and require a valid CWnd handle in order to become active and therefore visible.
Hence I need access to the native peer. Is there a way to do this?

ok andrew, when i compile the given code i receive the following errors:
hwndex.java:19: cannot resolve symbol
symbol : class DrawingSurfaceInfo
location: class HwndEx
      DrawingSurfaceInfo drawingSurfaceInfo =
      ^
hwndex.java:20: cannot resolve symbol
symbol : class DrawingSurface
location: class HwndEx
         ((DrawingSurface) comp.getPeer()).getDrawingSurfaceInfo();
           ^
hwndex.java:20: warning: getPeer() in java.awt.Component has been deprecated
         ((DrawingSurface) comp.getPeer()).getDrawingSurfaceInfo();
                               ^
hwndex.java:24: cannot resolve symbol
symbol : class Win32DrawingSurface
location: class HwndEx
         Win32DrawingSurface win32DrawingSurface =
         ^
hwndex.java:25: cannot resolve symbol
symbol : class Win32DrawingSurface
location: class HwndEx
               (Win32DrawingSurface) drawingSurfaceInfo.getSurface();
                ^
4 errors
1 warningand i consulted the document for "getPeer()" and there it is said that "getPeer()" method has been deprecated since JDK 1.1 so how can one use the above code. please give the code in more appropriate way.

How do i get my ipod touch to download more than one app at a time, can i make it toware i dont have to wait for one app to download before it starts downloading another,

my ipod will only download one app at a time and runs extremely slow. i was wondering if there is some way that i can make it download more than one app at a time and how can i make the app start downloading again after i have left my wi-fi zone and then went back in. im really confused.

Download everything on your computer in iTunes, then sync your iPod to iTunes.
You should be syncing (backing up) to iTunes and your photo app regurally, anyway.

How do I get a game to work in more than just my account?

I bought a game for my son at the weekend, which I installed successfully and it works fine in my account. But despite having it selected in Parental Controls, it won't work in his account. I tried removing all controls for him, but it still didn't work. The icon for the program looks like the general Apple icon, with ruler, brush, and pencil, and when you click on it a message appears saying "You cannot open the application because it may be damaged or incomplete". Well this isn't true, because it works in my account.
I tried searching for info about the error message on the Internet, and found advice on dealing with the message when it appeared with a completely different program. It advised right-clicking on the icon, and clicking on Show Package Contents, then Contents>Mac OS. Then it said double click on the icon (which opens Terminal) in there and next time it should run OK. This didn't work, but I noticed that there was not as much text in the Terminal window in my son's account as in mine, so I wonder if I need to enter the same text for him. This is all getting rather complicated, but does anybody know anything about Terminal, and whether any of this makes sense? Or is there something else I need to do?

Sphinx,
The folder that you copied should already contain any saved games, and they must remain where they are, relative to the game itself.
If you would like the copy to go back into the Applications folder, go right ahead and put it there, replacing the original. As long as you are just moving it, not making a copy, ownership will be retained by your son.
Kiraly has posted a command for use in Terminal. The command he has given does nothing for ownership, but rather changes permissions such that anyone will be able to run the game. The problem with this is that any new saved games will revert to the default permissions, and you will again encounter errors.
It is far better, in my opinion, to manage ownerhip in this case, not permissions.
OK, let's get started. The command to change ownership of any item is rather simple:
<pre style="overflow:auto; font-family: 'Monaco'; font-size: 10px">chown <who> <what></pre>
the "who" part will refer to a user by short name, and the "what" part will be the path to a file or folder. So far, we have three elements included in our command, and each one is separated by a space. The problem with this is that we can only modify items that we own; only "root" can modify items regardless of ownership. So, we are more often required to "become root" in order to execute this command:
<pre style="overflow:auto; font-family: 'Monaco'; font-size: 10px">sudo chown <who> <what></pre>
By preceeding our command with "sudo," we tell the command to execute as the "root user." Only admin users are allowed to perform this action, so we will be asked for our admin password. Once we have typed the command correctly, we press <RETURN>. We will receive a password prompt. We then type our password (it will not be echoed) and again press <RETURN> to execute the command.
This works fine for single files, but we will usually be dealing with more than a single item. Your case is a good example; one where ownership of an entire directory structure, including any "nested" files and folders, must be changed. For this, we need to add an "option" to the command: the "-R" option. This tells the command to change the ownership of the item named in the "path," and then to do the same "recursively" to every file and/or folder nested inside. It also implies that the target is a directory:
<pre style="overflow:auto; font-family: 'Monaco'; font-size: 10px">sudo chown -R <who> <what></pre>
Let's now talk about the two remaining variables, the "arguments" to the command.... The first argument (the "who" part) requires a bit of discussion. In simple terms, this will be a user's short name. However, it will most often also be necessary to change the "group ownership" when we change ownership. There is a separate command to accomplish this, but we can easily forego the need to use this second command by including it in this one. The tool we must use to do this is the ":" modifier, inlcuded in our "who" argument. In 10.3 and later, all users are members of their own, unique group, so we simply use their short name (which is also their group) twice:
<pre style="overflow:auto; font-family: 'Monaco'; font-size: 10px">sudo chown -R <who:who> <what></pre>
Now for the final part, the "what" argument... As stated earlier, this will be the path to the intended target (for example, /Users/HOME/Documents/My_Folder). Here, we must discuss the possibility that a path name will include spaces. We can name directories in OS X using spaces, but UNIX needs a little help with them. Since UNIX will normally see any space as an indication that another element to the command is coming, we must explicitly tell it that such is not the case. In other words, we must "escape" the space. We do this by using the forward slash before our space: "\" Let us assume that we have a folder named "My Folder" for which we want to change ownership. Our command will look something like this:
<pre style="overflow:auto; font-family: 'Monaco'; font-size: 10px">sudo chown -R fred:fred /Users/fred/Documents/My\ Folder</pre>
Obviously, the above command also assumes that we are logged in as "fred," and we are giving ourselves ownership of a folder in "fred's" HOME folder.
If this path naming convention is daunting to you, or you simply aren't sure of the correct path, the process can be automated somewhat. Any item can be dragged from the Finder into the Terminal window, and Terminal will automatically fill in the correct path. In this case, we would type the first part of our command:
<pre style="overflow:auto; font-family: 'Monaco'; font-size: 10px">sudo chown -R fred:fred</pre>
Next, we would type a trailing space, and then we would drag our folder from the Finder into the Terminal window. Finally, we would press <RETURN>, enter our admin password, then press <RETURN> again to execute.
Scott

How can I get the float variable in 2 decimal point?

after running the following simply manipulation program,
14.85 should be returned, but in stead, 14.849999.
how can i change the precision? i want the returned number in 2 decimal point.
public class TestC {
public static void main(String[] args) throws Exception {
               float var = 0.00f;
               var = (float)4.95 * 3;
               System.out.println(var);

There is absolutely no way that you can change the precision. It is fixed.
If you want to display two decimals places (which is not the same as changing the precision) then you can use the following.
float var = 0.00f;
var = (float)4.95 * 3;
java.text.DecimalFormat f = new java.text.DecimalFormat("0.00");
System.out.println("var=" + f.format(var));

How do i get a xy graph to plot more points?

Similar Messages

Maybe you are looking for