How do I get actions script 2.0 in Flash CC 2014?

Even when I go to previous versions, there is not option for CS6/ AS2.

Hi Chase,
See Ability to add ActionScript 2.0 support in Flash CC where a similar topic has been discussed. While there is no provision to use AS 2.0 in DW CC, you can install DW CS6 on your computer along with CC. Dw CS6 has support for AS 2.0.
Thanks,
Preran

Similar Messages

  • How use flex sdk 3.5 Action Script-3 code in flash builder 4.5............???

    hiiiiiiiiiiiiiiiiii
    can i use my flax sdk 3.5 action script-3 code into flash builder 4.5 .....if yes so plz give me detail how??..with step....

    Ya i tried by keeping <fx:Declarations> part but still it is throwing error,
    In flex3 we are making a component ex: <mx:canvas> and changeing that component to
    <cairngorm:ServiceLocator xmlns:mx="http://www.adobe.com/2006/mxml"
    xmlns:cairngorm="com.adobe.cairngorm.business.*">
    </cairngorm:ServiceLocator>
    if any one used 4.5 with cairngorm let me know
    thanks

  • Getting Action Script 3 to work in Action script 1 template?

    Hi all,
    I'm creating an interactive Flash project based on an AS1 template, but a lot of my effects (scenes in separate swf files) are action script 3.0. I am working with Flash CS5, which can run everything in the AS1 template, but I wasn't sure how to get the Action Script 3.0 swfs to play in it. Any recommendations? Some of the effects and interactions are pretty basic (eyes following cursor, rain, etc.) but I haven't been able to find the Action Script 1 equivalents of these effects and I wasn't sure if there was a way to get this to work.
    Thanks
    J

    Hey, thanks so much for your reply!
    I'm sorry, but I'm having a little trouble following your suggestion - do you mean I would need to reprogram and change all the AS 1 code to be AS 3? Or how would I create an AS 2 SWF Container swf? The piece is a website, there's already an AS 1 container (index) file loading the other swfs. So would I make a CONTAINER #1 (Actionscript 2) --> CONTAINER #2 (Action Script 1)--> Other swfs? What would be simplest?

  • Keep getting action script error 1069 then my computer freezes

    i keep getting the message
    action script error 1069 when loading a page and sometimes it also freezes,plus i also get this message can anyone help
    ReferenceError: Error #1069: Property setSubId not found on DropDownDealsInterface and there is no default value.
              at DddWrapper/onDealsAppLoaded()

    Do you get that message only on one website, or on all? If only on one, please post a link.

  • How to avoid custom action script link executing for all pages. It should execute for only custom list

    Hello all,
    The below code creates the custom action script link. however this is executing for all the pages.
    I want to execute only to list not on all the pages. How i can acheive this. Please help
    var context =
    new SP.ClientContext.get_current;
    this.oWebsite = context.get_web();
    var collUserCustomAction =
    this.oWebsite.get_userCustomActions();
    var scriptLink = collUserCustomAction.add();
    scriptLink.set_name('Welcome');
    scriptLink.set_title('Welcome');
    scriptLink.set_description('Welcome to new custom script Link');
    scriptLink.set_location('ScriptLink');
    scriptLink.set_scriptSrc('~Site/Scripts/test.js');
    scriptLink.set_group('');
    scriptLink.update();
    Navaneeth

    Then Edit the list page add the script editor web part on the page . Copy the paste the script. Now it will affect the list only. Or else in your script just validate the list id.
    Ravin Singh D

  • How do I get my colours correct again in Photoshop CC 2014? White is showing as beige or cream.

    For some reason my White has turned to Beige/Cream?If I select CMYK 0,0,0,0 I get a beige colour and as nice as beige can be I actually want white.
    Does anybody know how I can get the colour/display back to normal?

    Sounds like you have a bad monitor profile.
    Monitor profiles are associated with the monitor by the operating system, e.g., through the Color Management function in Windows.  To return to the Windows default, add the sRGB IEC61966-2.1 profile and make it the default. 
    Then, if you're looking for accuracy, get a calibration and profiling device and generate a custom profile that properly describes your monitor as it operates connected to your system.
    -Noel

  • How do I get a program to run inside flash

    How do I get a program on my harddrive to run inside flash on my computer? I would like to build a Flash front end for my boat pc, but I would need to be able able to open up a program inside a flash.exe?
    would a external .ini  File work? if so what code would I use internally to execute the .ini
    any help would be greatly appreciated Sincerely newwaveboats

    Thanks for the tip about Zink, but it is not what I'm after.
    On (Release)
    FS Command ("exec", "install.exe")
    End On
    google search just revealed this button code but it was for back in the day "Flash 8" as1 or 2.  as3 your not allowed code to be plaaced on buttons.
    So I know it is possible, I just need the know how.
    EDIT: I looked further into to this, and it is perfect for my needs. my first look was quick and I saw a close to 300 price tag and that it was a compiler, 2nd longer look showed it was free for personal use and has lots of great system features.
    Thanks again combustion007 for your help was greatly appreciated, Sorry I did not realize how perfect it was when you first told me about it.

  • How do I get back to classic workspace?  dw cc 2014.1.1

    How do I get the split iew to show up with code window on left and design window on right.  Now its design on top and code on bottom.  I want to switch it.

    Ensure that View > Code and Design is checked first.
    Then click View > Split Vertically.
    Split Vertically will be greyed out if View > Code or View > Design is checked.

  • Action Script 3.0 fro Flash Professional CC running on Windows

    Hi everybody,
    I am trying to learn Action Script 3 on Flash Professional CC. The video courses I am following are on Lynda.com and they all talk about when referencing an instance of a movie clip that typing that instance name followed by the (dot) will bring up a list of properties available for that instance. I see this in action when watching the video but when I try the properties don't appear. For example I have an movie clip of a Circle on my stage and the instance of that movie clip is named mv_Circle
    When I type the line 1> mv_Circle.   there should be a list appears showing the properties but this doesn't happen so I have to try and guess at what the property might be and what its expected value might be. Example adjusting the alpha of that instance I would type
    1> mv_Circle.alpha = 0.5;     but the word alpha doesn't appear in the supposed list. Am I doing something wrong or have I setting set up wrong somewhere. My OS is window 7 64bit or Win 8 64 bit. Neither computer will give me this option.
    I really hope somebody can help me as this is driving me crazy. Thank you in advance.
    Dougie

    Thank you so much, I have just tried this and of course you already know the answer it works.
    The video course I am following doesn't mention this anywhere. Maybe I'll ditch that course in favour of some other course work.
    Thank you again
    Dougie

  • How do you get a link to open a flash flv video?

    I'm trying to get a link to launch a flash flv video. I need
    it to open only about as large as the video itself which is
    320/240(a little larger is no big deal. I don't want to have to
    embed it into a 1040pix wide page. When I link it, the video is
    blown up to 1040pix wide & just a little distorted!
    Is this possible/easy to do?thanx
    steve

    Go here -
    http://www.neapco.com/n_why-neapco.php,
    and look at the link to the video in
    the left-hand sidebar. Does that code help you?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "matroxman" <[email protected]> wrote in
    message
    news:eb0qh1$6p0$[email protected]..
    > I'm trying to get a link to launch a flash flv video. I
    need it to open
    > only
    > about as large as the video itself which is 320/240(a
    little larger is no
    > big
    > deal. I don't want to have to embed it into a 1040pix
    wide page. When I
    > link
    > it, the video is blown up to 1040pix wide & just a
    little distorted!
    >
    > Is this possible/easy to do?thanx
    > steve
    >

  • How do I get Java script void (0) to work?

    Hi,
    Ever since downloading the mountain lion i have found issues, particularly with St George Bank Bpay that I am unable to load some pages due to the Java Run Script Void (0) being shown.....
    How do I fix this? I know it isn't a bank issue as other computers and my I phone are able to do this function without issue.....
    Any ideas about how to get Java to run properly? I have tried all the usual tricks of enabling/disabling things, restarting, and have also installed the most recent update, but it did nothing.
    Thanks!!

    You can't necessarily rule it out as a problem with the site based on that, it still could be. But there are a number of possible causes for this. See:
    http://www.tech31.com/what-does-javascript-void(0)-mean.html
    Also, note that JavaScript is in no way related to Java. Installing and enabling Java will not help with this problem, and will actually reduce the security of your system. You should keep Java disabled in your web browser.

  • How can I get the Scripts icon to appear in Mail?

    I have recently installed some Mail scripts that are found in a Mail Scripts folder within Applications. There are also other Mail scripts that I can see, along with a bunch of other scripts, when I click on the Scripts icon in Finder.  Why isn't there a Scripts icon within Mail as in all other applications?  How do I run any of the Mail scripts if they can't be accessed within that application?  Any help would be appreciated.  Thanks!

    Hello, the Mail Scripts you want to see & use should be in...
    /Library/Scripts/Mail Scripts
    You can attach a script to a Mail rule to enable actions by other applications or to increase the flexibility of existing actions. For example, you could set up a rule where an incoming message triggers a script that copies information from the message and then enters it into a database that works with AppleScript.
    To attach an AppleScript script to a rule:
    Choose Mail > Preferences, and then click Rules.
    Add a rule or select an existing rule to edit.
    Create or modify conditions as necessary.
    From the “Perform the following actions” pop-up menu, choose Run AppleScript.
    Click Choose, locate your saved script, and then click Choose File.
    Click OK to save the rule.
    Do you have the Scripts Menu shiwing in the Menubar?

  • How do I get automator scripts into iTunes? Very frustrated.

    This is one of those questions that probably has a very simple answer unless you haven't worked with Automator or applescripts.
    I found Automator, created a script for iTunes to change settings for audiobooks that I import from CD so that it remembers it's place in a "song", makes it so that it doesn't show up in shuffle lists, and doesn't have a gap between songs. Yippee for me.
    I click on File, Save, name the file and save it and ... it doesn't show up under iTunes. It only took me 45 minutes to get it so that the scroll icon shows up under iTunes (I'm so confused now that I don't even know which thing I did caused that to happen) but my script I created doesn't show up.
    I did find one place that said to place the file in (myname\library\scripts\programname) So I went to my home folder, find the library folder, found the scripts folder, and found only one application under there (Safari) but no iTunes. I created a folder called iTunes and saved my script there but ... it doesn't show up under iTunes.
    I did try quitting iTunes and opening it back up and ... it still isn't there.
    Is this even the right place to ask this question?

    It seems at this point the Script menu in iTunes doesn't recognize Automator files. A quick and dirty fix is to save the workflow as an application and then make an AppleScript that says:
    tell application "NameofApp" to launch
    save that script as a script and put it in the appropriate folder (/Users/username/Library/iTunes/Scripts). That script should show up in iTunes and running that will run your application which should do what you want.
    Hope this helps.

  • How can i get java script for apple

    java script turned off cant get it back on.

    The interpreter to handle JavaScript is built in.
    To turn the JavaScript interpreter on and off for all pages:
    Firefox > Preferences > Content tab
    If you already have JavaScript enabled on this tab but some sites tell you that JavaScript is ''not'' enabled, this might be the result of an add-on, a script filter, or many other possibilities.
    You didn't provide a lot of information in your post. Can you indicate where you have this problem, when it started, and whether you recall making any changes in Firefox or on your system before this happened?

  • How can I get quiz scripts to pull properly.... Using CP 6 with Infosemantics Drag & Drop Widget

    I'm modifying a course which is composed of 4 mini-quizzes with each section having a results slide which gives you your cummulative score. This course was created by my predecessor. The course was previously published, loaded to our LMS, and used by new hires to test their knowledge and abitliy to locate information. In it's original state the course works and the Results slides score and coaching messages display as they should.
    Now that I need to update the course, I've discovered that the first section was built using a Drag&Drop widget. I didn't make any changes to the section built using the widget. Unfortunately, the Results slide for this mini-quiz section has become a problem when the user gets a score of 0 or 10 points. Instead of getting a message that reads, "Keep Trying!" (0 points) or "You're Doing OK!" (10 Points) they get a "Perfect Score!" message.
    Notice the scoring is correct for the section it's the messaging that's wrong. Since this is only happening with this one part of the quiz I'm assuming that there could be something wrong with the widegt.
    Any input would be appreciated.

    Rod Ward was very helpful in aiding in the fixing widgets that outdated due to a version update. However, this fix does note resovle my original problem. In short, the widget Drag/Drop was never the problem with the scoring/scripting issue. Can anyone give me insight as to why a course that has used by our learner population previously would stop functioning properly.
    Reminder:
    1. I made minor edits to the course in question. none of my edits impacted the section that is not functioning properly.
    2. Currently, learners would get a "Perfect Score" script if they scored 0, 10, or 30 points. "Perfect Score", in this first section should only display at 30 points while 0 points should yield "Keep Trying" and 10 points should yield "You're Doing Ok" responses.
    Any Thoughts!

Maybe you are looking for