How do I get Adobe Elements 10 to recognize my printer?

I just installed Photoshop Elements 10 and want to print a photo using my Canon 9000 Mark II printer. When I click "PRINT" it says first I have to install a printer. How do I install this printer so that Elements 10 recognizes it? My operating system is Windows 7 64-bit.

Hi I do have the Canon Pro 9000 Mark II printer as the default printer.
I just tried a couple of things. I tried printing the photo from the ORGANIZER and it printed fine. Then I tried again to print the same photo from the EDITOR and got this message:
Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer.
So it looks like the ORGANIZER recognizes my Canon printer, and the EDITOR does not!   How can that be?
Date: Mon, 4 Jun 2012 13:09:10 -0600
From: [email protected]
To: [email protected]
Subject: how do I get Adobe Elements 10 to recognize my printer?
    Re: how do I get Adobe Elements 10 to recognize my printer?
    created by hatstead in Photoshop Elements - View the full discussion
There have been many reports about this problem with HP printers. I don't recall a report about Canon.There is a tceh note re HP units: http://www.novadevelopment.com/search.html?search=greetingcardfactor y+deluxe&searchButton.x=34&searchButton.y=9 Do check in Control Panel>Devices and Printers to be sure that your printer is the default.You may also want to check on the Canon web site for updated drivers. Please let us know how you make out with this issue.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4464349#4464349
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4464349#4464349. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

How do I get Adobe Export to recognize my sign in?

How do I get Adobe Export to recognize my sign in? The confirmation e-mail is not working.

I would try asking in the Digital Editions forum,
http://forums.adobe.com/community/adobe_digital_editions

How do I get Adobe Reader to recognize my e-reader device?

How do I get Adobe Reader to recognize my Audiosonic B702 e-reader? It comes with Adobe reader mobile. Any suggestions?

I would try asking in the Digital Editions forum,
http://forums.adobe.com/community/adobe_digital_editions

How do I get Image Capture to recognize a printer on my network?

I just got a new MacBook Pro. I have my epson printer on my network. How do I get Image Capture to recognize that I have a printer. Nothing comes up on devices. I'm sort of stabbing in the dark at network settings and I downloaded the latest Epson driver. Nothing seems to work. Can anyone help? Suz

In Image Capture, a network printer / scanner will appear under "Shared". If it is hidden, a number will appear adjacent to it, representing the number of hidden devices.
If it still does not appear, try resetting the printing system: Mac OS X: How to reset the printing system
After you do that you will need to add the device again according to the instructions here:
OS X Mavericks: Set up a printer
Follow the instructions below Add a network printer
Also read:
Troubleshooting printer issues in OS X

HT4356 Feeling dumb. Have an ipad2 and a compatible wireless printer. How do I get the iPad to recognize the printer?

How do I get my iPad to recognize my compatible wireless printer?

http://www.apple.com/support/ipad/assistant/airprint/

How can I get adobe reader to recognize new nook device

How can I get my adobe reader to recognize my new nook glowlight reader so I can download library books? I already have adobe reader installed.

Moved to Adobe Digital Editions

HT3771 How do I get my computer to recognize my printer and print both Windows7 and Safari?

I added Parallel software to my MacBook Pro 10.6.8.It was printing fine then asked me to connect usb. I was just choosing esc. I think I chose connect Windows. Now won't print some things. How do I get it to print all things on both sides? Thanks for your time

You need to connect your printer to your WiFi router wirelessly - maybe by using the printer's front panel (if it has one) or maybe by using a Windows (usually) PC connected to the printer with a USB cable.
Once that's done, you can disconnect the USB cable, and print wirelessly. From your description, I'm not sure you've done this required first step.

How can you get Premiere Elements to recognize hardware. It will NOT recognize my Dazzle Video Capture device or either of two HP DVD burntes. I feel like I wasted my money.

That should have read, It will NOT recognize my Dazzle device or either of 2 HP DVD burners.

TNTerri
What version of Premiere Elements are you using and on what computer operating system is it running?
If Premiere Elements 13, please be advised that it does not support DV or HDV capture firewire. And, any USB devices
have never worked for that purpose for Premiere Elements (any version).
As for the burner not being recognized in the Burner Location field of burn dialog of the program, please consider
(if you are dealing with DVD CD burner rather than a Blu-ray DVD CD burner.
CD, DVD drive not recognized after Adobe application install | Windows
Depending on how matters progress, you may want to do an uninstall reinstall using the following scheme
Uninstall, the usual Control Panel way
Do a free ccleaner run through to get rid of leftovers from incomplete installs reinstalls
CCleaner - PC Optimization and Cleaning - Free Download
Reinstall with antivirus and firewall(s) disabled.
We might even involve later a deletion of the Adobe Premiere Elements Prefs file and, if necessary, the whole Folder in
which it exists. More on the latter later.
ATR

How can I get Premier Elements to recognize my Canon Vixia HV40 to record tape from it?

I recently installed Adobe Premier Elements 12 on my new Lenovo U310 Ideapad computer. I opened the program and was able to transfer a clip from a file transfered to me from a smart phone recording and start assembling a new home movie. However, when I tried to get video footage from my Canon Vixia HV40 tape camcorder, I received a message "No HDV camera connected. I then used my older Canon Vixia HV20 camera and changed the USB connecting cable, but that camera too was not recognized. In the past, I had been succesfull using an older version of Premie Elements to get footage from my Canon camera. Is it possible that this new Premier Elements 12 is not programed to pick up these Canon video cameras or is their some way around this problem. My new computer does not have a 1394 input.

TR Snevac
As far as I have ever seen reported DV or HDV data capture into Premiere Elements Capture Windows (any version) does not work unless the connection is firewire. And, there are occasions (especially with HDV capture firewire) the require that the capture firewire be done in HDVSplit and then the split clips imported into a Premiere Elements project via the typical Get Media/Add Media route.
Which version of Premiere Elements allowed you to do a DV or HDV capture firewire in to its Capture Window using a USB connection? From what you wrote it gave me the impression that you were saying that you had.
If you have followed the protocol for HDV data capture firewire into Premiere Elements 12 (with correct project preset)
http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b79-ABF6-E9E75F498DB2. html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
then you would need to explore the use of HDVSplit (firewire connection) and then import of the .m2t split clips from that process in to Premiere Elements 12 (Add Media/Files and Folders/Project Assets).
http://strony.aster.pl/paviko/hdvsplit.htm
If both these Canon camera are miniDV camcorders, then you need a firewire connect to the data capture into Premiere Elements Capture Windows.
Do you have access to a computer with a firewire port?
Or
Does your computer have what is referred to as a PCMCIA slot for use with a firewire card? Have you looked into the possibility? No sure if that will work for you.
ATR

How do I get Adobe Updater to recognize it's package has already been installed?

Every day, despite having already installed Adobe Reader 10.1.10, I am getting notifications to run Adobe Updater. When I do so, it offers to install 10.1.10 despite the fact that that version is already installed. I've let it proceed numerous times but the nag keeps coming. I'm on a Mac running OS X 10.9.3.
Thanks,
Doug

Hello & welcome aboard!
Depends on which camera it is, but see...
http://webcam-osx.sourceforge.net/
http://www.mac-compatible-web-cam.com/

How do I get Photoshop Elements12 to recognize my printer/scanner?

I have Photoshop Elements6 and just upgraded to 12... but 12 doesn't 'see' my scanner, the import option is grayed out... I just downloaded new drivers for my printer, but that didn't seem to help. Anyway, I can get my money back for this worthless upgrade?

I've a similar issue. I installed the trial of Photoshop Elements 11, and had my daughter set it up so that I could scan directly into the application. Worked perfectly.
By the time I purchased Elements, 12 had been released.
We attempted to install 12 tonight, and all went well. BUT! 12 will not recognise the Twain plugin. It is moved correctly as per the instructions for both 11 and 12.
My daughter attempted to trouble shoot but none of the solutions clearly available work. In vain, she reinstalled 11 as I still had my original trial download, re-set that up with the correct Twain plugin and it works perfectly.
How can I force 12 to also comply?
Message was edited by: Rossco75

How can I get Photoshop Elements 13 to recognize my Epson WF-3520 multi-purpose scanner?

How can I get Photoshop Elements 13 to recognize my Epson WF-3520 scanner?

Can you try renaming the %APPDATA%\Adobe\Photoshop Elements\13.0 folder and see if it helps.
Thanks,
Anwesha

Sign on problems within Elements 10; plus cannot backup writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

How do I get Application Manager to recognize that Photoshop is not installed?

Application Manager says that Photoshop CS6 is installed. It isn't. I've rebooted the Mac and it still says it's installed. What installed was a partial or corrupt file which I have trashed. How do I get Application Manager to recognize that Photoshop is not installed so I can download and install it again? Thanks.

Do you have an uninstaller available to you in the Applications/Utilities/Adobe Installers folder? If so then please run the uninstaller.
If you don't then please utilize the uninstallers available in this folder to remove all currently installed Adobe Creative Software. You will then want to follow this by running the CS Cleaner tool. You can find details on the use of the CS Cleaner tool at CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

How can I get photoshop elements to open my nef images?

How can I get photoshop elements to open my nef images?

The D3200 requires at least ACR 7.1, which isn't compatible with any version of PSE prior to PSE 11, so no, you can't do this directly in PSE 9.
You could upgrade PSE, use the Nikon software to convert the files and then open the resulting images into PSE for further editing, or download the free Adobe DNG converter to convert your NEFs to DNG files that your version of PSE can understand.

How do I get Adobe Elements 10 to recognize my printer?

Similar Messages

Maybe you are looking for