How do I get AirDrop to work on my iPad model MD511LL/A?

I would like to use AirDrop on my iPad model MD511LL/A.
How do I make it work?
Thanks.

Your iPad is an iPad 4 (4th generation), 32 GB, Wi-Fi only and is compatible with AirDrop as long as it's running iOS 7 or later.
See the following page:
Use AirDrop to wirelessly share content - Apple Support
Note the requirements for ALL devices...AirDrop from iDevice to iDevice or AirDrop from iDevice to Mac/Mac to iDevice)

Similar Messages

  • How do I get Airdrop to work between my iPad and my iMac?

    I use an iPad with software version 8.1 How do I turn on Airdrop so my iPad can be 'seen' on my iMac and my iMac can be 'sin's my iPad?

    Which model iPad and which model iMac?

  • How do you get Groups to work on the IPAD? They imported and show in Address Book but when used, only the first address picks up.

    How do you get Groups to work on the IPAD. They show in address book but only the first name is used when entering.

    When you select the bookmark on the upper left, you should be able to see multiple groups.
    For the groups page, select the bookmark on the upper right to see the individual entries.

  • How do I get Siri to work on new iPad. Downloaded 6 but is not there.

    How do I get Siri to work on new iPad. Downloaded 6 but is not there.

    Bama, you're going to have to do a little of this work for yourself.
    Here's how to set up Siri on an iPad 3:
    http://apple-ipad-tablet-help.blogspot.com/2012/06/setup-siri-on-new-ipad-3-with -ios-6.html
    Read it carefully, OK?

  • I got a movie (the mist) from the itoons store. My ipad says I can not be played. How do I get this to work on my IPad?

    I got a movie (the mist) from the itoons store. My ipad says I can not play it. How do I get this to work????

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How do I get FaceTime to work on my iPad

    How do I get FaceTime to work on iPad

    Using FaceTime
    http://www.apple.com/sg/ios/facetime/
    http://support.apple.com/kb/ht4319
    http://support.apple.com/kb/TS4268

  • Hi I have a Lexmark all in one printer how do I get it to work with my ipad mini

    Hi I have a Lexmark all in one printer how do I  get it to work  with my  mini ipad

    It depends upon the model. It's wifi-enabled ? And is it listed on this page as supporting AirPrint : http://support.apple.com/kb/HT4356 ?
    If not then do Lexmark have their own app in your country's store that supports that model ? If they don't then there are a number of third-party printer apps such as Print n Share and PrintCentral Pro which might work with it.

  • How do I get airdrop to work on my iMac--stuck on fetching

    When I try to open airdrop it spins endlessly.  How can I get it to open and function?
    Thanks

    Your iPad is an iPad 4 (4th generation), 32 GB, Wi-Fi only and is compatible with AirDrop as long as it's running iOS 7 or later.
    See the following page:
    Use AirDrop to wirelessly share content - Apple Support
    Note the requirements for ALL devices...AirDrop from iDevice to iDevice or AirDrop from iDevice to Mac/Mac to iDevice)

  • How do I get keychain to work on an iPad Air ?

    How do I get my Keychain to work on my iPad Air ?  I'm not that stupid but I can't figure it out....help

    Hey Czwhat22,
    Thanks for the question. I imagine you are referring to iCloud keychain? If so, the following resources provide great information about iCloud keychain and how to set it up:
    iCloud: Frequently asked questions about iCloud Keychain
    http://support.apple.com/kb/HT5813
    Set up iCloud Keychain - iCloud - iPhone Basics - Apple Support
    http://support.apple.com/kb/TI241
    Thanks,
    Matt M.

  • How do i get ichat to work with my ipad

    I cant seem to get my family iphones and my ipad to work with ichat, i get an offline message when i try to send one?

    It depends upon the model. It's wifi-enabled ? And is it listed on this page as supporting AirPrint : http://support.apple.com/kb/HT4356 ?
    If not then do Lexmark have their own app in your country's store that supports that model ? If they don't then there are a number of third-party printer apps such as Print n Share and PrintCentral Pro which might work with it.

  • How do I get ITunes to work on my iPad?

    I cannot figure out how to authorize my new iPad so I can buy books and music from iTunes. I was able to sign in and update my credit card but I keep getting a message to contact iTunes support when I try to authorize payment.

    Thanks Soto. My last 4 of my zip needed to be entered since the credit card provider had included it with my address. Once I fixed that it worked

  • How do I get my gmail working on my iPad again after resetting the account password?

    I changed my Gmail account password and now when I try to access my mail with my iPad it says it cannot connect to the server because the password is incorrect, even when I try to update it to the new one.  Any thoughts?

    Hi jrevans99,
    If you are having password issues with your mail account on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
    iOS: Troubleshooting Mail
    Regards,
    - Brenden

  • How do I get Bluetooth to work on my iPad 3 ?

    THe Bluetooth facility on my iPad is useless. I have tried to connect with 4 other iPads, my own and a friends iPhone 4S and a printer. No success at all, just that annoying whirling sun.
    My iPhone connects to my TomTom and other iPhones. , so at least that woks correctly, we'll, sometimes anyway !
    Any suggestions ? I hate to say this but, I never had a problem with the opposition !! 

    You don't sign in through Safari.
    Set it up in Settings. That's all you have to do.
    http://www.apple.com/icloud/setup/ios.html
    All your iCloud data will be in the provided apps: Mail, Contacts, Calendars, etc.

  • I have 2 ipod touch's that both have frozen screens and will not reset or show up in itunes. They both froze after trying to update to the latest software version. How do I get them to work?

    I have 2 touch's that froze when trying to update to the latest ios version. Neither respond to restarting the devices. They are also not recognized in windows or itunes. How do I get these to work. I followed all of the instructions on  the apple website and they still don't work. I have verified that I have apple support for mobile devices installed in itunes and my version of itunes is 11.0.1. I am running windows 7 64bit with service pack 1 installed and all of my updates are current. Is anybody else having this problem with their apple devices?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • How do I get fios to work with my new desktop w/ Windows Media Center

    Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
    also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
    ** computer specs**
    Product number NZ017AA
    Introduction date 30-Jun-2009
    Country/region sold in: United States,Canada
    Hardware Base processor
    Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
    Chipset AMD 780G
    Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
    Power supply 300W
    Memory
    Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
    4 GB* (4 x 1 GB) (32-bit OS)
    *Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
    Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
    Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
    This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
    Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
    Wireless Wireless LAN 802.11 b/g
    Video Graphics Radeon HD4350
    512 MB DDR2 memory
    I/O Ports: HDMI, VGA, single-link DVI
    Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
    Sound/Audio High Definition 8-channel audio
    ALC 888S chipset
    Network (LAN) Integrated 10/100/1000 Base-T networking interface
    Memory card reader
    Contains an Infrared receiver for remote control
    Supports the following cards:
    Compact Flash I
    Compact Flash II
    IBM Microdrive
    Secure Digital (SD)
    mini-SD
    MultiMediaCard (MMC)
    Reduced size MultiMediaCard (RS-MMC)
    MultiMediaCard Plus (MMC plus)
    MultiMediaCard Mobile (MMC mobile)
    Memory Stick
    Memory Stick Pro
    Memory Stick Duo
    Memory Stick Pro Duo
    SmartMedia
    xD Picture Card (xD = extreme digital)
    External I/O ports
    I/O ports on the front panel
    Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
    I/O ports on the back panel
    Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
    Expansion slots
    Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
    Drive bays
    Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
    Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
    Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

    Based on what you've posted, your computer does not have the right tuner.   You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
    QAM tuners to record local channels only
    This requires Windows Vista or Windows 7
    Hauppauge WinTV-HVR-2250
    SiliconDust HDHomeRun (info on a sale)
    CableCard tuner to record local and cable channels
    This requires Windows 7 + one CableCard from Verizon for $3.99/mo
    ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
    Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
    Make sure your computer has Windows 7 Home Premium (or better) installed.   That's necessary to support CableCard tuners.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Maybe you are looking for

  • Collections screen tables in R12

    Hi, I have a requirement to create a new Collector Call history in R12 as these report have been dicommissioned in R12. User is entering the data in Notes and Task tab in the Collection screen. When we select the Organization and select View -Custome

  • Is SAP-OSS RFC Configuration required for Technical Monitoring ?

    Hi Experts, I have not configured the SAP-OSS rfc connection.Is it required for setting up the technical monitoring(Tcode : SOLMAN_SETUP). If Yes can you please help me in solving the above problem.Our aim is to configure  technical monitoring for  s

  • Looking for a basefile to create a plugin

    Hi, i'm looking for a basefile that can read and execute a .jsx file. Something like the image below: Who can help? Cheers Daniel

  • Why does LR creates a second "EDIT" file in the catalogue, once the image was opened in the develop

    Is there a way to set the preference, that is should not copy a secind picture of the same item once it has been modified in Photoshop? If it is important I would save the image in a different folder from the other program directly. When I return to

  • 2LIS_13_VDITM Enhancement  problem

    Dear Experts, Below is the Code which i wrote in the EXIT_SAPLRSAP_001 Function exit. There are two field which i wanted to fill (TSR and Profit Center) but only Profit center is getting filled. Please let me know what is wrong in this code. WHEN '2L