How do i get an internet connection when i am out of range of my pc

hi...i have a 4th generation ipod touch...no problem with internet connection when i am close to my pc...but when i go out and am away from my pc i dont get a connection....... why is this and how do i get a permanent connection.................thanks

Because you iPod requires a wi-fi connection.  It is not 3G or 4G like the iPhone.  As lllaass said, you can get a portable wi-fi source that uses 3G or 4G technology, but there is a monthly subscription fee.

Similar Messages

  • How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

    How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

  • How do i get an internet connection from my Mac to my iPad using a usb cable?

    I have a Mac connected to the internet through a modem. However, i also want my iPad to share this connection through the usb cable. Is this possible? If not, is there any other way i can get my iPad to share the internet connection from my Mac?

    It look like you can turn your mac into a hotspot and connect your ipad to it via wifi.
    http://computers.tutsplus.com/tutorials/quick-tip-use-your-mac-as-a-wi-fi-hotspo t-and-more--mac-46462

  • I used to have a mobile me account to use when I travel.  I have an older power mac G5.  How can I get into my email when I am out of the country.  My computer is too old to use I cloud.  I have updated it as far as I can with operating systems.

    I have a Power Mac 5 WITHOUT an intel processer/  I have updated my computer to snow lepord which is as far as I can go.  I am unable to use the cloud.  I used to have a Mobileme account and used it when I traveled to foreign countries yo read email.  I do not know how to acess my email when traveling now.  My email address is through mac.com.  Please advise as there must be a way.  We are traveling to South America soon for about a month and I need to know how to access my email from afar.
    Thanks!

    Hi Margaret,
    I have a Power Mac 5 WITHOUT an intel processer/  I have updated my computer to snow lepord which is as far as I can go.
    I think you updated to Leopard/10.5.x, Snow Leopard/10.6 is Intel only.
    Actually you're in luck, you can still use iCloud for eMail on PPC using 10.4.11 or 10.5.8, but it must be IMAP, not POP...
    iCloud Mail setup...
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    SMTP (outgoing mail server) information:
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    One secret I think is when setting it up don't choose the .me/.mac type, it'll auto fill in .mac as the server which won't work, go back afterwards & change the servers.

  • How easy is it to plug a windows laptop into the ethernet port of a Time Capsule and for it to get an internet connection?

    I use Time Capsule to distrubute wifi thoughout my home.  I have an office laptop (windows) that my company's IT dept won't install a wireless card in (for security reasons????).  Can I get an intenet connection to the laptop if I connect it to an ethernet port on the back of the TC?

    Can I get an intenet connection to the laptop if I connect it to an ethernet port on the back of the TC?
    If you can get an Internet connection when you test using your iMac's Ethernet port, then you know that the Ethernet port is working on the TC and the Ethernet cable is also working.
    You should be able to get a connection on any other computer in the same way.
    If you cannot get an Internet connection on the PC with the same hook up, then you will need to do some troubleshooting on the PC....or call the IT guys at the company to find out what type of block they may have on the PC.

  • How to configure my netwok in solaris 10 to get an  internet connection

    Hi,
    I am new to this forum and to Solaris in general. I am sorry if this question was asked and treated before.
    I just successfully installed Solaris 10 on an intel based workstation. I have an ip address that shows that is "**static**". I have a Fios router which i can get to from Mozilla firefox by opening 192.168.1.1 but i cannot get an internet connection even to register my copy of of Solaris or to get updates.
    In the network proxy configuration, I selected : Direct internet connection. My Ip address is 192.168.1.2. I believe it shoub be dynamic not static and if it is true how to cdit the settings to use DHCP. Your help is very appreciated. Thank you in advance.
    Aerkadri

    If you want your Solaris system to use DHCP, the cleanest way to do this is to run '/usr/sbin/sys-unconfig', let the system reboot, and tell it to use DHCP when it asks you to set up networking.
    Mark

  • HT1483 I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is wor

    I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?

    What version of iTunes are you using?  The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
    B-rock

  • My iMessage doesn't work, and I keep getting a message saying I've lost Internet connection(when really my wifi is just fine) and it won't sign me in. Help?

    My iMessage doesn't work, and I keep getting a message saying I've lost Internet connection(when really my wifi is just fine) and it won't sign me in. Help?

    Thank you soo much ! Every now and then I would check my DNS and it would say 8.8.8.8 but I just checked now and realised it was somethin something something THANK YUU SOO MUCH ! REALLY APPRECIATE IT AND YU DESERVE THOSE  49,085 points !!!

  • Updating firmware when I can't get an internet connection through the router

    I am trying to update the firmware for WRT54G V8, but some of the instructions indicate I need to have the router connected and be connected to the internet.  I cannot get an internet connection through the router.  Can I upgrade firmware without being connected to the internet through the router.  (I have had this router for about a year and a half with no problems until now.)

    Yes, you can upgrade the firmware without an Internet connection.
    To upgrade the firmware, first download the new firmware into a computer that you can wire to your router.
    Next, power down your entire network.
    Then wire the computer to a LAN port on the router.
    Disconnect all other wires from the router.
    Power up the router and allow it to fully boot (1-2 minutes).
    Power up your computer.
    Login to the router, and do the firmware upgrade  (it will likely take several minutes).
    Power down your entire network.
    Next you need to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. Report back with this problem.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • How can I get an automatic connection to wifi on startup?

    We lost internet connection during snow/ice storm. I have to manually connect to wifi now. How can I get an automatic connection to wifi?

    An 'uninterruptible power supply' that automatically steps in and takes your computer
    off the grid momentarily, will work in cases of brown-out (under-power) & surge (spike)
    and it does so at a fast rate. Most of these also offer a way to customize sensitivity to
    a certain degree, depending on model and should there be a valid reason to do so.
    An old-school surge protector, even if it has a few fancy LEDs, is no protection. And
    for less than a replacement logic board or an hour of authorized Apple repair, the UPS
    is a fairly good investment. Backup battery is user-replaceable in the better made units.
    Most of them offer extra ports that do not use the battery-backup power feature. If you
    need to have more items run when the power switches up/down or out, you'd need to
    consider a larger capacity backup power unit. In some instances, the makers of these
    (for a time, perhaps even now) did caution users to not install more than one UPS per
    room when the same leg may have inadequate grounding, since these can dump the
    excess surge power from several different UPS units and overload the ground.
    That said, the gamble is yours. I've found to have and use these is some protection
    and when away from the computer. Most settings for controlling them appear in OS X.
    No additional software is required. Other settings may be on the UPS front panel.
    Good luck & happy computing!

  • I am trying to use Words with friends on my iphone 5.  How do I get rid of   "Connect to itunes to Use Push Notifications

    I am trying to use Words with friends on my iphone 5.  How do I get rid of   "Connect to itunes to Use Push Notifications

    Reading some older threads from 2012 and 2011 it appears the problem was present even then.  Part of the problem was due to people using multiple or different account id's on the various devices.  In my case, I only have one ID and it is the same on all devices yet the iPhone and iPad are still throwing the same error when I try turning on iTunes Match.  This is very frustrating . . . any help out there?  Thanks.

  • Why do i keep getting the "internet connection timeout" error message?

    i have been upgrading a few standard itunes albums to itunes plus versions through my 3g mobile broadband connection, while not exactly a fast process, it was working fine until i started to get a backlog of 3 or 4 albums which were waiting in a queue to be downloaded, now every time i do the "check for downloads" option i get the "internet connection timed out" error message...this has been going on for 2 days! am i right in suspecting the backlog of albums is too much for my 3g mobile broadband connection? this is really doing my head in, if any of you techies could help me, it'd be much appreciated...?

    yes i have recently updated to itunes 8.2.1, but i am starting to think its apple's servers (i tried to download at my brothers house...different computer and connection...same connection timeout error), because it will still let me download an album, but not necessarily all of the tracks. when i questioned itunes customer services about the seemingly hit and miss state of affairs with downloading, they told me to wait 3 weeks before trying to download the tracks that were giving me the grief (2 tracks from an arctic monkeys album)...which kinda indicates they know there is a problem and are trying to fix it, why else would they say wait 3 wks??? they gave me 5 free music tracks too, which is handy.

  • How do i get a wifi connection at home for my ipad from a imac

    how do i get a wifi connection at home for my ipad from a imac

    If you have a wired connection to the iMac and you are asking about using the iMac for the Internet connection for the iPad, you will need to use Internet Sharing on the Mac.
    No clue which OS version you run on the Mac, but here is a link to help with 10.6 and this will get you started. You can Google " Internet sharing with Mac OS ...." and come up with a number of support articles.
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8156.html

  • How do i get my ipod unlocked when in diabled mode?

    how do i get my ipod unlocked when it is in disabled mode? After several attempts to put password in.I have already been on Itunes and restored an updated everything and still wont work.

    Restore.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • I'm setting up my Time Capsule for the first time and cannot get an internet connection throughWAN connection

    I'm setting up my Time Capsule for the first time and can't get an internet connection via ethernet cord

    So new AC model TC??
    What modem is it? Pure cable modem .. did you power cycle the modem ( OFF for at least 30min..)??
    This is essential to lose the old setup and start afresh. 
    How have you setup the TC?
    Did you try just bridge to existing router? If it doesn't get an IP and you just bought it, possible it is faulty.
    Lots more details.. really important things like did the ethernet connectivity leds go on.. both the TC port and the modem port - front ethernet indicator should light up..

Maybe you are looking for

  • WWSSO_APP_USER_MGR.EDIT_USER

    When trying to change a user's password normally (manually) via portal, the "Edit User" screen asks for an Admin password. If I enter portal30 as the password (for portal30 user), it accepts it as expected. However, when I create an application compo

  • When will Weblogic Integration 9.2 release?

    Dear all, Could anyone provide me some information about the release date of Weblogic Integration 9.2? Cheers, Xuehui

  • Uploading a wmv file using del.interoute?

    Hi there I created a wmv file through Final Cut and uploaded it using yousendit.com as I always do. However the client says that those kind of links dont work on their sites and they need to be like 'del.interoute.com' Does anyone have a clue what th

  • IPad 2 will not charge shows nothing in screen

    Havnt used my ipad for about 3 weeks and have come to charge, when I initially plugged it in to charge I just got the screen with the apple Logo and the sign showing connect to power.  When I did nothing happened and now there is nothing on my screen

  • SELECT call performance increase through archiving...

    Hi all, Short description : SELECT call performance increase through archiving records that satisfy a particular criteria like a cut off date. Is there any way i can intercept a select call on the real table and make it return records from the real o