How do I get around source tape issues while importing a DV tape?
Ok so I recently purchased Final Cut Studio 3 and I am attempting to import (to Final Cut Pro 7) DV tapes via a Samsung digital camcorder (model: SC-D365) and a 800/400 Firewire cable. However after a certain amount of time (it varies from capture to capture) a message pops up and displays the following "Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. Capture has been aborted and your clip has been saved". The tapes themselves play perfectly on the camera. Also the few clips that I have gathered after many attempts have tons of audio holes. I am new to Final Cut Pro and have tried everything and I really need to figure this out because the tapes that I have are the only tapes of the project. Any help would be appreciated and since I am new to the program I would greatly appreciate detailed steps if you know how to fix it.
That camera is MiniDV, so by and large should be compatible overall. You should run a head cleaning tape (or a head cleaning ape if you have one - Magilla Gorilla?). But your deck may not be completely compatible with the recording. Subtle variations can cause dropouts that you won't see because the electronics just substitute the last packet from to hide this during playback. I've had tapes that would capture just fine in one deck, and dropout central in another.
Best bet is using the camera that recorded it to play it back.
Worst case scenario, set the capture to non-controlled device, press the capture button, then press play on the deck. However, you will not be able to re-capture that segment automatically should you lose your capture files.
make sense?
Patrick
Similar Messages
-
My iMovie refuses to recognize, import, or work with AVCHD Video. It also refuses the same video clips even after I have converted them to Mp4. Also, when I delete a video clip already used in a project, then later import the same clip back to my ipad, the software is unable to recognize and find the clip again! Help! How do I get around these issues?
Hi Craig,
I also got the second problem. The storyboard on iMovie trailer has all these missing videos. If I import them on my iPad it doesn't find them.
If you find a solution it would be much appreciated to share it here ... I'll do the same.
Thanks,
Rafael -
It's the ONLY area you have to do this with! A glitch??? I sure hope so! But, at this point, I have torn the entire VoiceOver app apart to the nth degree and have isolated this issue to THIS area ONLY.
Apple, please help, or UPDATE iOS 5, AGAIN!
Thank you...iBooks only syncs purchased books. Others must be synced in iTunes.
-
I brought an IPhone 5 from a second hand source and I tried to activate it but it asked for his Apple ID how can I get around that?
MarkeyMarcc wrote:
I brought an IPhone 5 from a second hand source and I tried to activate it but it asked for his Apple ID how can I get around that?
Read this: Find My iPhone Activation Lock: Removing a device from a previous ... -
How can I get around Javascipt issue with keyboard events?
Javascript issue: keydown, keypress, keyup events cause quick search to initiate with the division key on the keypad and slash key on the keyboard. I am trying to program a graphic representation of a 10 key pad and the division (/) sign is problematic for roll over and processing based on key events. How can I get around this? further notes: Safari also has problems with key events and the division key(s) but no search function connected. Thankyou for time and attention
A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25 -
I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer. The issue is my system does not support the newer version. Does anyone know how I can get around this?
Apple wanted to charge me 50 bucks jsut to talk to someone!
I believe you may be referring to the $49 ASL agreement at AppleCare? That is only when/if you are out of AppleCare Protection.
Can you get to an AppleStore Genius Bar?
They may be able to fix this for you. No charge.
I highly doubt that. There is a $70 charge for troubleshooing software issues, EVEN IF there is AppleCare Warranty on the hardware.
However, since there is no charge for an appointment at a Bar, go make one, and see what options they give you. Let us know how it goes. -
Flash CS6 can't open play SWF files without importing and destroying them, how can I get around this?
I'm just trying to preview an swf file in flash like I have with all previous versions.What if my SWF loads external content from an online server?
Not only does the current flash player prohibit such activity, it doesn't even pop open an error anymore saying there was an error connecting to an online source.
Normally, I would simply drag the SWF into Flash and all connections would go through. I could see traces, errors, and experience no issues.
Now I can't even do that. So what then? You have crippled a fundamental use of the program, but THANK GOD we have that deco brush that nobody asked for.
And for the record, the nature of my work benefits from not necessarily allowing the Flash Player to connect to online content. The error it pops up? That's simply another method of error checking that I require. Updating the Flash Player options is not an option.
Why would you even remove this key feature from Flash anyways? It's been there for years ... has the ratio of people importing SWFs (a rather useless gesture in an increasing OOP world) really outweighed the people using Flash as a testing environment that much? -
Hi I have just purchased an i pad for my wife and have registered it in my name to add some apps prior to giving the i pad to her. However, for using face time and games where you can link via wifi it will look as though there are two of the same, if I am trying to link her ipad to mine. How do you get around this?
Assign an email address (gmail.com?)
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
i can't remember my password for i cloud and the email address is no longer active to reset it, how can i get around this.
iForgot iCloud Password
Alternatives for Help Resetting Security Questions and/or Rescue Mail
1. If you have a valid rescue email address, then use this procedure:
Rescue email address and how to reset Apple ID security questions.
2. Fill out and submit this form. Select the topic, Account Security. You must
have a Rescue Email to use this option.
3. This is the only option if you do not already have a valid Rescue Email.
These are telephone numbers for contacting Apple Support in your country.
Apple ID- Contacting Apple for help with Apple ID account security. Select
the appropriate country and call. Ask to speak to the Account Security Team.
4. Account security issues almost always require you to speak directly to an
Apple representative to securely establish your identity as the account holder.
You can set it up so that Apple calls you, either immediately or at a time
convenient to you.
1. Go to www.apple.com/support.
2. Choose Contact Support and click Contact Us.
3. Choose Other Apple ID Topics and choose the appropriate topic for
your issue.
4. Follow the onscreen instructions.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
Apple ID- All about Apple ID security questions. -
Living in Dubai where many apps are blocked. How can I get around ? Tried to create a new Id but my billing address in Dubai will not match the criteria for an account in the US. Help please to get around the censorship...thanks
The censorship in regards to certain apps not being available in your country is by your country, not by Apple.
Due to various laws and licensing in each country, in order to have an iTunes store account in a particular country you must have a credit card with a billing address in that country. If this were up to Apple, there would be no such requirement and there would be only one iTunes store for the entire world, but various laws, regulations, and licensing issues in each country, this is required by Apple. -
My iphone shows a red circle alert but doesn't allow me to access it. How do I get around this?
Red circle alert to what? Maybe post a screen shot of your issue.
-
I have attempted to update a few apps and the install has frozen on 'waiting' not allowing me to either access the app or delete it, any idea why this has happened and how do I get around it?
See if either of these things works for you. In the future ... Only update one app at a time. Forget that the Update All button even exists. It causes more problems than it does good - IMO.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream. -
#define ON 1
#define OFF 0
in seperate code
int variable = ON;
variable is globally define for that module.
in seperate code
if (variable == ON)
the complier errors off on the if (variable==ON)
My guess variable is variable in of type int and ON is a preprocessor command. Therefore it is a mismatch and complier doesn't like it. How can I get around this.
thank
MahenMahen
What is the exact message of the compiler?
I think the error is, that the compiler does not find the definition of ON
and OFF. Is it in the same source file?
If not, try to put it into an .h file and include it where you need it.
Stephan
"Mahen" schrieb im Newsbeitrag
news:[email protected]..
> Preprocessor command, assigned the variable and then compare the
> variable to int.
>
> How can I get around this?
>
> #define ON 1
> #define OFF 0
> in seperate code
>
> int variable = ON;
> variable is globally define for that module.
> in seperate code
> if (variable == ON)
> {
>
>
> }
>
> the complier errors off on the if (variable==ON)
> My guess variable is variable in of type int and ON is a preprocessor
> c
ommand. Therefore it is a mismatch and complier doesn't like it. How
> can I get around this.
> thank
> Mahen -
Whenever I try to add music to Itunes, my computer locks up. This never happened until I update itunes to the latest version. How do I get around this?
Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too. -
I'm trying to download itunes 10 but I get to a point in the download and it tells me, "The feature you are trying to use is on a network resource that is unavailable" but I haven't had itunes on my computer for a year now so how can I get around this?
iTunes.msi
Perfect, thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
help, tryed to down load to many Apps at once, ipad froze. dealeted Apps, no longer got internet connection. help
-
Windows 7 to replace Vista Home Permium
New HP Touchsmart--second generation. Have completed recovery disk creation. Want to replace Vista with Windows 7. Can I use recovery disks to restore HP and other program files? Install of Windows 7 to replace Vista Home Premium will wipe disk a
-
Dear all, I am trying to create a form with an option to strike through either one the words "Yes" or "NO" as shown below". I cannot find anyway to do so, but I do see some forms download from the internet can do it. Please help. Q1. Are you a xxxx?.
-
Planned Activity and Actual Activity Fields & relevenat table
Hello, Can any one pls let me know the field and Table names for the following two fields (need for preperation of a report): PLANNED ACTIVITY: - Production Order confirmation Planned Activity column ACTUAL ACTIVITY: - Production Order confirm
-
Filter App Store by compatible iOS version
I have an version 1 iPad and I would like to set a filter that only returns apps that are compatible with the 5.1.1 iOS version on my device. I haven't found a way to do this yet. It would be a handy feature for Apple to have implemented and I'm su