How do I get around the U44M1210 error? Both Photoshop and Bridge

I have dried for months to update Photoshop and Bridge. I have tried uninstalling and reinstalling both, but still get error. They reinstall, but they can't apply a patch.

I am not flash wit Mac systems, but with Windows 7 and 8.1, we restart the computer, and open the Application manager as Administrator by right clicking its icon. The official help page should get you fixed
https://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Similar Messages

How do i get around the A12E1 error for installing application mgr

how do I get around the A12E1 error

Which operating system are you using? Do you have any other Adobe Creative software installed?

I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login.

I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login. I tried the method where you go into single user mode and type in commands, however that method uses some of the letters that are not working on my laptop.

You didn't mention which version of OS X your running but there are password reset utilities provided OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support or OS X: Changing or resetting an account password - Apple Support
Alternately you can use an external keyboard to log in and change the password. Make a backup if you don't have one, it's likely that your problems aren't over. If that water continues to migrate downward and fries the logic board your macbook will be toast.

How do I get around the "Master Password" window?

Since I'm the only user at this sight, I don't think that I need a Master Password.
So How do I get around the "Master Password" window so I can get some work done?
The Box is not marked, but setup still refuses to go any further.

Hi warp4dennis,
Thank you for your question, I understand that you would like to get around the master password dialogue. [[Master Password]] specifically [https://support.mozilla.org/en-US/kb/use-master-password-protect-stored-logins#w_removing-the-master-password how to remove it]
I hope this helps!

HT1212 my ipad asks for a passcode but I never entered a passcode. this happened after the ipad battery went dead and i recharged.how do i get around the passocde prompt?

My ipad battery went dead and after recharging and booting up the ipad, it is asking for a passcode. however, no one remembers ever entering a passcode in to this ipad, isnce it used by everyone in the house. how do i get around this passocde prompt?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

GPS Use - How do I get around the security

I have two projects. Both don't work due to security restrictions.
One is the media for midi use.
The other uses the GPS in my phone.
This is strictly for personal use.
How do I get around this? Any help would be nice.

As far as I know, the only way to go around security restrictions is to have you application sigend by Verisign, Thawte, JavaVerified, etc.
Marc

How can I get around the -40 import error?

I'm using iMovie 3.03 and just found out that the -40 error I get when importing videos is due to a 9 minute (and 32 seconds) limit. My imports (1 mov and 1 avi) are just over 14 minutes each. Does anyone know of a work around for this problem? Or of any 3rd party software that will allow me to cut the import in half so I can bring each file into iMovie in 2 parts?
Thanks for any advice you can give.
YH!

OK... I went to the site and downloaded the app. I ran it and it exported 9 mins of the file and then would not export the other half and gave me an error: NSReceiverEvaluationScriptError:4
Then I put the app on my desktop and changed the length of the file exported to 8 mins (using the instructions given with the download. When I ran it again, it said I needed Quicktime Pro to run it.
So... now what I don't want to do is buy Quicktime Pro and find out that it still won't work. Would Quicktime Pro be able to do split the videos? Or at least be able to cut half of the video off and save as another file name?

Can anyone tell me how to get around the -1202 error on XP?

After I downloaded the 10.6.1.7 vrsion, I can no longer make purchases from the iTunes store. Have tried reverting to the previous version, entering my security code to "update my billing info", and uninstalling and reinstalling iTunes. Decided I should stop acting craxy (doing the same thing over and over epecting a different result) and just go the MP3 route to get music.

The audio tutorial will drive anyone batty, so I'll put you out of your misery.
Go to Settings/Accessibility/VoiceOver - and toggle it OFF. Also, make sure "Speak Auto-Text" is not toggled on.

Need help getting around the following error: JBO-27101: Attempt to access dead entity in EO.

Hi everyone,
My logic in prepareForDML() updates some attributes (shown in the snippet below) based on whether an insert or update is taking place. But, when I delete a line, I get the following error: JBO-27101: Attempt to access dead entity in EO. So far, I have not been able to catch this error.
        if (operation == DML_INSERT) {
            setLineId((new SequenceImpl("eo_s",
                                        getDBTransaction()).getSequenceNumber()));
            setCreatedBy(createdBy);
            setCreationDate(currentDateAndTime);
            setLastUpdatedBy(lastUpdatedBy);
            setLastUpdateDate(currentDateAndTime);
        } else if (operation == DML_UPDATE) {
            setLastUpdatedBy(lastUpdatedBy);
            setLastUpdateDate(currentDateAndTime);
Any advice would be appreciated. Thanks!
James

Hi Timo,
Thanks for responding. Whenever I delete a line and commit, I get the error. And, since inserts and updates are all that I am interested in, I did not think that I needed deletion logic. The VO contains several EOs, but all are reference EOs that cannot be updated except for the main EO.
Here is the entire prepareForDML() method:
    protected void prepareForDML(int operation, TransactionEvent e) {
        // BEGIN Initial Version
        // Using prepareForDML is a best practice (versus doDML).
        ApplicationModule am;
        boolean lineIsValid;
        byte entityState;
        byte postState;
        Date currentDateAndTime;
        Date weekEndingDate;
        Number createdBy;
        Number lastUpdatedBy;
        String amConfiguration;
        String amDefinition;
        String entityStateText;
        String operationText;
        String postStateText;
        ServicesAMImpl servicesAMImpl;
        Timestamp timeStamp;
        // amDefinition = "com.model.services.ServicesAM";
        // amConfiguration = "ServicesAMLocal";
        // am = Configuration.createRootApplicationModule(amDefinition, amConfiguration);
        createdBy = new Number(-1); // TODO fnd_profile.value('USERNAME')
        entityState = getEntityState();
        entityStateText = null;
        operationText = null;
        postState = getPostState();
        postStateText = null;
        lastUpdatedBy =
                new Number(-1); // TODO fnd_profile.value('USERNAME'); is there a last login id?
        // servicesAMImpl = (ServicesAMImpl)am;
        // lineIsValid = servicesAMImpl.callValidateLineProcedure(getBillable());
        timeStamp = new Timestamp(System.currentTimeMillis());
        currentDateAndTime = new Date(timeStamp);
        // TODO Should weekEndingDate be in the callValidateLineProcedure()?
        weekEndingDate =
                commonCode.nextDay(getActivityDate(), Calendar.THURSDAY);
        setWeekEndingDate(weekEndingDate);
        // TODO See https://community.oracle.com/message/9542286?tstart=14.
        // if (entityState != Entity.STATUS_DELETED & entityState != Entity.STATUS_DEAD)...
        System.err.println("prepareForDML - getLineId: " + getLineId());
        switch (operation) {
        case DML_DELETE:
            operationText = "Delete";
            break;
        case DML_INSERT:
            operationText = "Insert";
            break;
        case DML_UPDATE:
            operationText = "Update";
            break;
        System.err.println("prepareForDML - operationText: " +
                           operationText); // TODO
        // System.out.println("prepareForDML - operationText: " + operationText); // TODO
        switch (entityState) {
        case Entity.STATUS_INITIALIZED:
            entityStateText = "Initialized";
            break;
            // Don't do anything.
        case Entity.STATUS_UNMODIFIED:
            entityStateText = "Un-Modified";
            break;
            // Don't do anything.
        case Entity.STATUS_DEAD:
            entityStateText = "Dead";
            break;
            // Don't do anything.
        case Entity.STATUS_DELETED:
            entityStateText = "Deleted";
            break;
            // entity.revert();
            // entity.refresh(Entity.REFRESH_CONTAINEES);
        case Entity.STATUS_MODIFIED:
            entityStateText = "Modified";
            break;
            // entity.refresh(Entity.REFRESH_UNDO_CHANGES);
        case Entity.STATUS_NEW:
            entityStateText = "New";
            break;
            // entity.refresh(Entity.REFRESH_FORGET_NEW_ROWS);
            // entity.refresh(Entity.REFRESH_REMOVE_NEW_ROWS);
        default:
            entityStateText = String.valueOf(entityState);
        System.err.println("prepareForDML - entityStateText: " +
                           entityStateText);
        switch (postState) {
        case Entity.STATUS_INITIALIZED:
            postStateText = "Initialized";
            break;
            // Don't do anything.
        case Entity.STATUS_UNMODIFIED:
            postStateText = "Un-Modified";
            break;
            // Don't do anything.
        case Entity.STATUS_DEAD:
            postStateText = "Dead";
            break;
            // Don't do anything.
        case Entity.STATUS_DELETED:
            postStateText = "Deleted";
            break;
            // entity.revert();
            // entity.refresh(Entity.REFRESH_CONTAINEES);
        case Entity.STATUS_MODIFIED:
            postStateText = "Modified";
            break;
            // entity.refresh(Entity.REFRESH_UNDO_CHANGES);
        case Entity.STATUS_NEW:
            postStateText = "New";
            break;
            // entity.refresh(Entity.REFRESH_FORGET_NEW_ROWS);
            // entity.refresh(Entity.REFRESH_REMOVE_NEW_ROWS);
        default:
            postStateText = String.valueOf(postState);
        System.err.println("prepareForDML - postStateText: " + postStateText);
        // DeadEntityAccessException
        if (operation == DML_INSERT) {
            setLineId((new SequenceImpl("eo_s",
                                        getDBTransaction()).getSequenceNumber()));
            setCreatedBy(createdBy);
            setCreationDate(currentDateAndTime);
            setLastUpdatedBy(lastUpdatedBy);
            setLastUpdateDate(currentDateAndTime);
        } else if (operation == DML_UPDATE) {
            setLastUpdatedBy(lastUpdatedBy);
            setLastUpdateDate(currentDateAndTime);
        // Configuration.releaseRootApplicationModule(am, true);
        // END Initial Version
        super.prepareForDML(operation, e);
Here is the entire doDML() method:
    protected void doDML(int operation, TransactionEvent e) {
        // BEGIN Initial Version
        // This logic is for troubleshooting only.
        String operationText;
        operationText = null;
        switch (operation) {
        case DML_DELETE:
            operationText = "Delete";
            break;
        case DML_INSERT:
            operationText = "Insert";
            break;
        case DML_UPDATE:
            operationText = "Update";
            break;
        System.err.println("doDML - operationText: " + operationText); // TODO
        // System.out.println("doDML - operationText: " + operationText); // TODO
        // END Initial Version
        super.doDML(operation, e);
James

When I try to back up my hard drive to an external hard drive if an alias is not correct or a file is not recognised it fails and I cannot tell the sytem to ignore the file. Anyone know why and how I can get around the problem?

Hi
I have a Mac PowerBook G4 running OSX and a Hitachi external HD. When I try to back up the data from my Mac to the HD it copies much of the data across but some files such as incorrect "alias' files and some other files do not copy. The messages I get indicate there are problems but when I click the OK button the backup stops. I then have to either delete these files or copy other files with correct alias details to overwrite the existing one. I then have to start the backup all over.
I have been carrying out a bfull backup so have been copyiing the hard drive of the Mac an pasting it into the external HD. Is this my problem? If so how do i carry out the backup function. I have been informed by Hitachi that I should be using the Mac's own "Time Machine" software but I don't seem to be able to locate this.
I have been told that there should be the option to either cancel the backup or skip the file but I don't get that.
Any ideas as I am running out of patience.
vic

If you are running Tiger, you don't have time machine.
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups. The free versions do a lot and you can upgrade to the full-service versions for small change if you need more. The one time I used SuperDuper! for cloning a volume it worked just fine.
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

HT201365 How can I get around the system lock pin code if I dont know what it is? I have my username and passwork

I have switched on my MAC after 2 months of no use and I am getting the grey screen asking for a system lock pin code, I dont know what it is, how can I get into my MAC?
Many thanks
Graham

That sounds like it's requestion the Find My Mac passcode. If you don't know it, you'll have to take it to a nearby Apple store with proof of purchase/ownership as only they can unlock it for you.

How do I get around the close IE message

I keep getting a message saying to close IE when I am tryg to install Flash. The only window I have open is the installer window.
How do I get arond this message and get Flash to install?

http://forums.adobe.com/message/5266110

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless i select the list in the sub file. How do I get backto the old method of seeing and using iTunes??

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless I select the list in the sub file. How do I get back to the old method of seeing and using iTunes??

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

How can I get cross fade/dissolve of both audio and video?

I want to centre the coss fade/dissolve transition on the clip boundary. I can do this with the video cross dissolve but not the audio cross fade - for the audio, the Alignment facility in the Edit transition is greyed out and the transition can only be located to the left or right of the clip boundary. It seems an obvious requirement and surprising that audio cross fade is not, optionally at least, an integral part of the video cross dissolve (as it is in Corel VideoStudio).

Steve - thanks for the reply.
Yes I am working in Timeline mode and have done what you suggest - i.e., drag in the video transition followed by the audio transition. However, despite my original update to the question, I now cannot centre the audio transition on the clip boundary - it worked once as reported but not since.
Basically when I drag the audio cross fade transition on to the timeline, it will only let me drop it to the left or right of the clip boundary. I then hightlight the transition and click on the edit transition button. The properties are displayed and I can alter the length of the transition but the wording in the alignment row of the properties is greyed out with the setting being "End at cut". The down arrow head to give the drop down with the other settings is grey and inactive.
I don't understand how I made it work once!
Any ideas?
Frank

How do i get around a 207 error?

keep getting this error? I have internet connection so I don't understand why it's not working

Ruudd45023428 for information on how to resolve Error 207 please see Error downloading and installing Creative Cloud application. You are welcome to update this discussion if you have any questions regarding the steps listed within the document.

How do I get around the U44M1210 error? Both Photoshop and Bridge

Similar Messages

Maybe you are looking for