How do I get back my Privileges

I cannot Save in Logic 8, I always have to do a Save-as. I think this started happening after 10.5.1.
AD2

You're lucky this only just started for you! I've had this for ages. It only happens once in a while for me (and goes back man to when I switched to Mac with version 6), so I created a Temp folder on my other drive and save the song there. Then I reboot the computer, load the song and save it to it's regular place, over-writing the previous version. It won't happen again that session and won't do it for many sessions after that. But it will happen again sometime, just as you think it's stopped doing it!

Similar Messages

  • How do is get back to Read & Write permissions on HDs ?

    Hi gang,
    I was trying to set up one central folder for 4 iTune users (accounts) in our household.
    One of the blogs said put in "Shared" folder and set permissions to "Read & Write".  I tried but on "Everybody" is does not offer the "R&W" option, just "Read".  They also said to be sure you clicked "Apply to Enclosed Items" in the drop down.  Although I could not set "Everyone" to "R&W", I clicked on "Apply to Enclosed Items" and the hard drives clicked for at least 15 minutes.
    Afterward I got a pop up that said...   System Extension "/System/Library/Extension/ACard6280ATA.kext" was installed improperly and can be used.  Try reinstalling.  and an OK button to click.  I clicked OK and at least 100 more popup appeared, one after the other as I clicked OK.   They all had the same basic message except the info after  /System/Library/Extension/, it kept changing slightly on each new popup.
    The big problem is I now have three of my four internal hard drives locked to my access and all they say custom on the permissions Privilege window.   Only my main HD is working, thank God.
    How do I get back to Read & Write on Privileges, and on all Hard Drives?
    Thanks for any help, I just made the move to MAC but have good background with windows operating system.
    Gary

    Thanks for all the reply's, I really appreciate your time.  I have Apple Care so I worked with Apple tech last night and today, but they had to pass problem on to their engineers.  They did a great job trying to help and spent 2 hours helping me input in code through the Terminal screen.  It helped a little, but we still can access drive 2, 3 and 4 due to the global permissions that were changed.   All in all, it looks like we have to reinstall the OS on a washed HD.
    I found out that the Repair program (Disk Utilities) only repairs permissions that were created after the initial set up.  It won't correct original setting and that's what happened when I clicked on "Apply to Enclosed Items" at the root level.  Likewise Time machine does not clone the main operating system so a restore would probably not get all the pieces back in their proper places.
    I was thinking of doing a reinstall of the whole Mac HD drive (boot drive) with an exact copy I made with Carbon Cloner a month back, but the techs seem to think they will have to work on of the 4 individual HD I have.
    Thanks again for the quick responses, I will let you know what happens in a few days.
    Gary

  • How can I get back into my application aftermath invoking Start up page of index.htm ?

    Gorgeous Hello All,
    If anyone of you can please provide me a solution for the following, will help me in plentious and galore.
    Am using Adobe RoboHelp, Version 10 and IE version being 10.
    A hurdle :-
    I have a application which has been developed in ASP .NET, Version 4.0. Help link has been created in this application wherein here the Start up page of index.htm has been linked to be read from the RoboHelp local project folder\!SSL!\Multiscreen_HTML5\desktop. All are working absolutely fine except when
    I login into the above-said application -> click on the Help page -> the index.htm opens with Contents, Index, Glossary -> Am able to successfully perform any task by respective clickings
    -> But I am not able to get back into my application when I click on the IE provided Back button (Alt+Left) -> Any amount of invoking Back button makes the system getting looped into this Start up page of index.htm only -> When I Close Tab (Ctrl + W) or Close ( X ) -> The window session gets closed and I have to repeat all by relogin once again.
    How can I get back into my application aftermath invoking Start up page of index.htm ?
    (I can always get back into the application easily by erasing those parts in the url which refers to this RoboHelp linkages – but this certainly looks non-polished work)
    Help Please
    Cheese – Vipin Nambiar, Bangalore

    Hey Jeff, I used Internet Explorer 10.0.9200 and Google Chrome 26.0.1410. Alas - it is the same behavior.
    (But Jeff : When I used Microsoft HTML Help as primary layout to generate chm file , My Help when launched from my Application opened in a new browser window and when I closed this Help browser window did not close my application. Looks like need to write few liner code to get this issue settled )
    Thanks Indeed of lots for your concerns Jeff !!!

  • How can i get back to windows 8 if i downgrade my laptop to windows 7

    My laptop was been downgrade from windows 8 to windows  7because of graphics not funtioning properly. how can i get back to windows 8 again? is there a recovery disc for this?

    Hi:
    Did you install the correct W7 x64 graphics driver that should work on your model?
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111285-1&cc=us&dlc=en&lc=en...

  • How do I get back to my desktop?

    How do I get back to my desktop with all my icons there while I have multiple windows open without closing any windows.  I would think I could press a keyboard button to get there.  I know if I have multiple windows open and I press F4 it takes me directly to my window of widgets that I use often and when I press F4 again it takes me back to all the windows that I have open.

    Got the solution.  I went on Mac Forums and someone there told me what to do.
    He said press the FN key and then press F11.  That's fantastic.  Just what I wanted.
    It takes you right to your desktop and when you press it again it will take you back to the window you were in.
    Try it.

  • I just pressed the wrong button to erase of my IMac, how can I get back all information from my computer ?

    I just pressed the wrong button to erase of my iMac, how can i get back all information ?

    Possibly through a data rescue service (can cost a four-figure amount) if you didn't have an external backup.
    But you must stop using that Mac immediately, or your data will be over-written.

  • I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

    I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

    You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

  • I have replaced my laptop and installed iTunes. When I try to sync my iPad or iPhone it says they are already linked to another iTunes library. How do I get back to my original library.

    I have replaced my laptop and installed iTunes. When iffy to sync my iPad or iPhone it says they are already linked to another iTunes library and will only let me transfer purchased items. How do I get back to my original library.

    Check out the solution found here.
    If you do a restore you will lose everything.  Some things will be backed up in iCloud but not everything.

  • HT4463 How do I get back to the same page I was on?

    When I have finished reviewing an app, if I click the back arrow in the top left corner it takes me back to the first page of the category. Not very user friendly when there are dozens of pages to click through to get back to where you were. How do I get back to the same page I was on?

    This is what I mean:  The users guide gives me all these instructions.  BUT, it does not give instructions to just STOP.  I don't
    Pause a song
    Tap .
    Resume playback
    Tap .
    Raise or lower the volume
    Drag the onscreen volume slider or use the iPad volume buttons.
    Restart a song or a chapter in an audiobook or podcast
    Tap .
    Skip to the next song or chapter in an audiobook or podcast
    Tap .
    Go to the previous song or chapter in an audiobook or podcast
    Tap twice.
    Rewind or fast-forward
    Touch and hold or —the longer you hold the control, the faster the song rewinds or fast-forwards.
    View album art full-size
    Tap the album cover when playing a song.
    I don't want to pause, resume playback, restart or any of these things.  i just want to STOP.  How do I do that?

  • IPhone 4s call waiting; how do I get back to the first call?

    When I'm on a call and a second call comes in I tap "hold current call and answer." I get connected to the second call and the first call is put on hold. But when I am done with the second call, how do I get back to the first call? I can't find any way to get back to the call that is on hold. I usually end up hanging up on both calls. Not good.
    Also, how do I switch back and forth between two calls? How do I put the second call on hold, go back to the first call to tell that person I must call them back, then return to the second call?

    http://support.apple.com/kb/TA38607?viewlocale=en_US
    Good Luck

  • I uploaded pictures from a second camera and my iphoto created a second library, how do i get back to the first library?

    I uploaded pictures from a second camera and my iphoto created a second library, how do i get back to the first library? Can anyone help?

    I have no idea what you did or what happened - but I can assure you that loading from a different camera does not create a new library
    So you need to supply information and someone here will assist you in sorting this out and figuring out what you really did
    What version of iPhoto do you have? What version of the OS? Why do you think that a second library has been created? What do you see when you launch iPhoto with the optipon kep depressed and use the select library option? Where is your iPhoto library normally?
    Anything else you can tell us that might help?
    LN

  • Version 4 will not open with Mac G4 System10.5.8 Replace ver3 now no Firefox at all . How do I get back to Ver 3 or get Ver 4 to open

    I down loaded Firefox 4 to my Mac Laptop G4 running operating system 10.5.8, 1.67ghz, 2gig ram. When install it in the applicatiion folder I replaced the version 3.6x that I was using. When I try to open Ver 4 I get an error message that iy cant open because it is not supported on this architecture. How do I get it to open or how do I get back to version 3.6x So i dont loose all my bookmark. For some reason Firefox on my backup disk says it has an error code and can not load

    Sorry, but as you discovered, Firefox 4+ no longer support the PowerPC CPUs.
    I recommend backing up your Firefox settings in case something goes wrong with the reinstall. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, download and save Firefox 3.6 from here: http://www.mozilla.com/firefox/all-older
    Does that work (i.e., pick up your profile automatically)?
    There's also an unofficial build using Firefox 5 code adapted to the PPC platform. You can read about that here: http://www.floodgap.com/software/tenfourfox/

  • I erroneously deleted some background icons, that now have left me with only thumbnail images, what appears when I want to enlarge is a grey circle containing a black exclamation symbol, how can I get back full function and undo my mistake

    I have erroneoulsy deleted icons repetious images from the computer which then affected my iphoto images, leaving me in some cases only with the thembnail image.   When I try to enlarge or perform any other function all that appears is a black field containing a grey circle with a black exclamation symbol( !)
    within it.  How to I get back full function of these affected images and undo my goof up.   I have tried restore, but my attempts have not proved successful. 
    Help !!!
    silvercoho

    What exactly did you do to delete these?
    How did you try to "restore" and what did you try to restore?
    Probably the only solution is to restore your backup of the iPhoto library  from before you did this
    LN

  • Reminders list frequently disappear,how can i get back my list whenever it suddently disapear?:(

    reminders list frequently disappear,how can i get back my list whenever it suddently disapear?:(
    I rely deeply on my reminders list, but a few times, the list just disappear and I have to rewrite my lists, but it is getting more and more annoying because my list is getting longer and longer and i just can't write it over and over again. Does it have a connection to my icloud for reminders is being disabled?
    Please help me.
    Thank You

    Phone to Mac will be able to pull up your previous backup info from your computer so you can have a copy of Contacts, SMS, etc.
    http://www.macroplant.com/phonetomac/

  • How do I get back to my basic start page from any ...

    How do I get back to my basic start page from any other page? There should be a one click link but I can't see how to do it. Apologies for illiteracy. Like say from this help page, how can I get back on skype and make a call?

    There is a "Home" button below search option which will take you to the main page.

Maybe you are looking for

  • "Non-Central Adapter Engines" in RWB

    Hi. We install XI system and we changed host name according to notes 757692. After then, We found one problem in RWB. When we run Component Monitor in RWB, Adapter engine is in "Non-Central Adapter Engines". Why Adapter engine is in "Non-Central Adap

  • Firewall error now won't turn on

    last night i received the firewall error message, and today my nano will not turn on. i've checked everything, but nothing is working. when i plug it into my computer, the screen flashes blank once,and then goes black again. the 5 r's did nothing. wh

  • Is anyone successfully using Digieffects Camera Mapper with CS5

    Hello all, I greatly want to use Digieffects Camera Mapper with After Effects CS5 in Windows 7.. http://digieffects.com/product/camera_mapper But it keeps crashing my installation of After Effects. I'm using the demo CS5 version downloaded from the D

  • Multi Select Item to be passed in URL ( Please help urgent)

    Hi , I have an item P1_PRODUCT('SOAP','PASTE','BRUSH')  in page 1. User selects multiple products and submits and a report is displayed . I have an hyper link on one of the column and when user clicks this > target is URL and i have passed P1_PRODUCT

  • I CAN'T OPEN MY MAILS, FB and photos app. thank you

    I am using an Ipad Mini, I can't open my Mails, Facebook and Photos appication? the last time I recharge it, when it was full recharge there is a message showing: Please check ur storage and 9 weeks no back up . what does it mean? thank you