How do I get beack the Facebook icon on the screen

How do I get back the Facebook icon on my iPhone 5s screen

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Similar Messages

How do i get past the screen that shows itunes icon and connection cord?

How do i get past the screen that shows itunes icon and connection cord?

Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software

How do I get to the screen in Mail that allows you to delete multiple "Previous Recipients" from the list? I have seen it but cannot find it again. Help.

How do I get to the screen in Mail that allows you to delete multiple "Previous Recipients" from the list? I have seen this screen but cannot find it again. It shows all of the "Previous Recipients" in a long list. You can edit the list by selecting multiple names or all names with the command key and delete. Help.

Launch the Mail app on your Mac and go to Window>Previous Recipients.

I want to back up my 4S but I don't get the correct screen when I plug it into my Mac - Just iPhotos and iTunes (songs) pop up. How do I get to the screen where I can back up and restore?

I want to back up my 4S but I don't get the correct screen when I plug it into my Mac - Just iPhotos and iTunes (songs) pop up. How do I get to the screen where I can back up and restore?

Hi Spookola,
I don't know how that could have happened. Go through the folders for the rolls and separate the 2005 rolls from the 2006 rolls, then import the 2006 rolls.

I choose Adobe Reader XI to open a GPX file. It will not open it how do I get past the screen that says it will not open it to choose something else?

I choose Adobe Reader XI to open a GPX file. It will not open it how do I get past the screen that says it will not open it to choose something else?

http://windows.microsoft.com/en-us/windows/change-file-open-program#1TC=windows-7
or
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7

HT200197 The message tells me my Apple ID has been entered incorrectly period how do I get to the screen that allows me to reenter it period question mark that allows me to reenter the ID

When I open Apple TV it tells me my ID is incorrect. How do I get to the screen to be able to reenter the correct password?

Hi, frecklesgardener.
Thank you for visiting Apple Support Communities.
I understand that you need to adjust the password for your Apple ID on your Apple TV. Here are the steps that will help you make that adjustment.
Apple TV
Go to Settings > iTunes Store > Apple IDs.
If you're signed out, choose Add New Apple ID and enter your updated Apple ID or password.
If you're signed in with your previous Apple ID, choose Sign Out, then choose Add New Apple ID and enter your updated Apple ID or password.
For Home Sharing, go to Settings > Computers, then turn off Home Sharing and turn it back on.
What to do after you change your Apple ID email address or password
-Jason H.

How does dust get in the screen?

ad for two years and noticing dust in the screen, for example a pretty big dust dot that can be seen on white or light backgrounds.
How does dust get in the screen? The middle of the screen? And will it eventually go away?
Is it through the vent? Like how does dust get in?

Is there an AASP near you? AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Apple does repairs on all of their products. Either way, if you are out of warranty, you will be responsible for all repairs no matter who does the repairs.
If you want to try DIY repairs - Do-It-Yourself Laptop Repair
Research YouTube's 'How To' video tutorials
FixYa

How does dust get in the screen anyway?

I have a few dust spects in the screen you don't usually notice. But I have when the comp is closed a gray piece of dust, a little bigger than a dust dot, like a bigger piece of dust. You can sometimes see it on a really light screen when the comp is on. How did it get in, and so far in the middle? Will dust fall down later? Because I dunno how the dust got to the middle...
Ugh it just bugs me! Dumb dust how did it get in the macbook pro screen! Had my mac for over 2 years.

Yeap. I have that same problem with my Zen Vision: M and my friend has the same problem with his iPod. Yes... It does get really freaking annoying. I just posted a thread about it because its really bugging the crap out of me... So I dont know any possible way to fix this, besides taking it apart.

How can dust get under the screen like this ?

I have a large piece of dust under my screen about an inch up and an inch from either side of the screen.
I use a cover on the rear of my phone, and have a zagg cover for the screen. How on earth can a speck get this far in ? I thought these were pretty much closed units.
Is this something Apple would exchange for ?

A forum search will reveal that several people have reported this and have gotten a replacement.
You can make an appointment at the Genius Bar and they will let you know if they can give a replacement.

How did dust get under the screen?

I bought a PB used about a month ago and it was in like new shape with the exception of one dead pixel that annoyed me. This is getting picky but now I noticed there is a piece of dust about an inch away from the dead pixel which really annoys me when I see those. I don't understand how a piece of dust got under the screen, I've had my ipod touch for over 2 years, in my lint filled pockets and it doesn't have any dust under the screen, just in the creases of where the glass ends. I've only had the PB a few weeks and when transporting it I have it in the cloth sleeve, and I clean it often, how could it have gotten in there, through the speaker grill? And could I use like an air compressor to blow it out or would that possible cause damage to it. I was going to buy the convertible case and a screen protector soon but still I don't see how that happens. Sorry for the dumb post but it is really annoying and I want to know if anyone else has had that happen or if it dust can be blown out.

Thats too bad. I dont get how its getting under there, Im thinking probably through the speaker grills but I'm not sure, the dead pixel was annoying enough but if any more dust gets under there its going to be really annoying to see all that on the screen. I dont know if the one already in there might move to the edge so its not as noticeable or if it might work its way out over time, if more get under there though Id say the best solution would be to take the glass off, if its even possible on the PB, I dont know that much about them, I heard the battery isnt removable but I think that means user removable meaning a PB dealer could open and replace it. If it can be opened without a professional without scratching anything then maybe just taking the glass off will work but I'd only do that as a last resort. I'm starting to get more and more disappointing with the PB the dust, the battery life isnt what I hoped for it to be, and there are very few good apps. Maybe when the ipad 3 comes out I can get a cheap ipad one to fill in for where the PB lacks

How do I get to the screen on my Audigy 2ZS where I can enable 'SPDIF Pass-through'

I see the screen on your support page but I cannot get to this screen with my software. Do I need to download a driver or application to get this option. I have a set of Logitech Z-5500 digital speakers on my Dell XPS 600 computer. I am using the digital coax cable but I need to enable SpDIF passthrough to let the speakes decode the digital output from my sound card in order to get surroun sound from the 5. speakers.

Click on Media Source "Go", then click the "Product Settings" tab, then choose "Device Controls" and click on the "Decoder" tab.

After installing 3.6, Firefox's screen image is drasticallay rreduced, how do I get bact the screen image size that I had with previous Firefox?

I installed Firefox 3.6 and when I restarted the program the display image size was approximately 2/3 the size of the image provided by the previous version of Firefox.I had to zoom-in 5 times before I could read the text. How can I recover the screen settings that I had with the previous version of Firefox or how can I set new defults for screen image size under Firefox 3.6?
== This happened ==
Every time Firefox opened
== After installing Firefox 3.6

Hello Michael.
Hopefully this support article is what you need:
https://support.mozilla.com/en-US/kb/Firefox+will+not+start
In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.
Also, if you want to use an older version of Firefox, please use Firefox 3.5.11. Only versions 3.5.11 and 3.6.8 are supported, and both contain all the latest security fixes. Using any other version is unsafe and not recommended.

How we can get back the screens resolutions on the secondary display

now i can sent 1280x720 on my secondary display, also there is only like 4 options and in the past we had several differnet options, how i can make it work again

Quick response!
I tried Ctrl + h and there is was! This used to be visible on tool bar, but this is just fine.
Much appreciated.
Julie

I want to set up a roaming network. I have directions. I have an extreme set up and working. I need to add an express. When I open airport utility I get the internet pic of internet and the base station. How do a get to the setting screens?

Directions require that I change settings on the base station on the screen that interent connection, TCP/IP DHCP NAT how do I get to that screen through airport utility.
Then I need to for my express to get to the screen the screen for wireless.
This has changed since last time I did this.
How do I get to the screens.

Your existing Extreme might already be configured in Bridge Mode. As long as the Extreme is working now, do not change any settings on the Extreme.
Apple incorrectly assumes that all users are connecting to a simple modem when most users are connecting to gateway devices....combination modem/routers.
You probably are as well and Bridge Mode would be the correct setting when connecting to that type of device.

How do I get to the restore screen in itunes

I am trying to restore an ipad and when I go into itunes all I get is the store, how do I get to the screen to restore the ipad

iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device)

How do I get beack the Facebook icon on the screen

Similar Messages

Maybe you are looking for