How do I get better resolution on my ipad2 camera

How to get better resolution from my ipad2 camera

The resolution of the camera is tied to hardware not software.  As James Ward4 said,  keep the lens clean and shot in the best lighting possible.  Shooting in dim light is the same as any other point and shoot camera.  The camera will try to compensate by slowing the shutter down so you will probably introduce camera shake into the mix which will blur the image unless you have the iPad stabalized on some type of tripod or camera mount.

Similar Messages

  • How to get better resolution on graphical borders in Pages?

    When using the «line effect» on a picture frame and choose a «image border», these borders a very pixelated and low resoltion when i.e. printing on a quality printer. Seems to be only screen resolution (100-150 dpi)? Is this a bug in Pages – how to get better resolution for these borders when exporting for example to PDF?

    Here you see the issue. The Document's size is A6 landscape, means 14.8x10.5 cm, and it prints and shows really pixelated

  • How do I get Better Investing magazine on my iPad?

    How do I  get Better Investing Magazine on my ipad?

    iTunes 11.1 is for Macs and PCs.
    Are you trying to upgrade your iPad to iOS 7?

  • How can I get the resolution of an image file in JSP?

    how can I get the resolution of an image file like jpg,gif,png in JSP ?

    Hii,
    If by the resolution, u mean size..this is how u can come to know....
    String add = "path/to/some.jpeg";
    javax.swing.ImageIcon chain = new javax.swing.ImageIcon(add);
    int height = chain.getIconHeight();
    int width = chain.getIconWidth();
    Hope that helps.
    regards
                   

  • I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

    I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

    If it's slow on startup it would be extensions loading or LaunchDaemons starting up. 
    You should have a look in:
    /Library/LaunchDaemons
    /Library/Extensions
    You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. 

  • Both of my kids have ipod touch 4.  On 1 we can edit the camera roll and delete muptiple pics at once.  On the other, we can't edit in camera roll and have to delete each picture one at a time?  How do we get edit as an option in camera roll?

    Both of my kids have ipod touch 4.  On 1 we can edit the camera roll and delete muptiple pics at once.  On the other, we can't edit in camera roll and have to delete each picture one at a time?  How do we get edit as an option in camera roll?

    Hi jenny,
    Are you certain that they are both running IOS 6.1.3? Go to Settings>General>About, and check the "Version".
    Cheers,
    GB

  • How can I get email receipt for my ipad2?

    Hi I bought IPAD2 from rockingham park apple store at June 25, 2011 . But I didn't get email  receipt for my IPAD2. How can I get email receipt for my ipad2 ? 

    I'm out of Country. I need reciept email for my IPAD2

  • How do I get iphone5 video clips from my camera roll into videos, then into icloud?

    How do I get video clips from my iphone5 camera roll into videos, then into icloud?

    Thank you -- I was able to find an answer in the previous posts and I just figure it out!  ;-}

  • How do you get the mic on the ipad2

    How do you get the mic on the ipad2 can anyone help? Thanks, Hallie

    The mic is built into the iPad. It is on the top of the device in the center (when you hold the iPad in portrait mode).

  • How do you get group skype video on ipad2?

    How do I get group skype video on ipad2?

    There is some help (including some troubleshooting about half-way down) on this page http://support.apple.com/kb/HT4319

  • How to get better resolution on Blu-ray (1080/60i)

    I'm experimenting with my new AG-AC160A camcorder and have been shooting youth hockey games in AVCHD mode, 1080/60i, 1/120 shutter, manual gain and white balance set appropriately, and florescent scene file setting due to lighting in rink. I have PP CS5 and am disappointed with the relative lack of HD-crispness when the Blu-ray output is played on my HD LED set. I used the above settings based on recommendations I saw in the forum somewhere. Any suggestions on what I can try differently? Thank you.

    To elaborate on Ann's great advice, the Sequence preset you should be using is AVCHD 1080i30 (60i).
    A good way to start out with the correct sequence is to import your clips and then drag one onto the "New Item" icon at lower right of Project Bin. This will create a new sequence to match the source material automatically. As Ann mentioned, you have a non-HD preview format, so if you rendered the timeline to green, and checked "Use Previews" on the final export, then your Blu-ray could have "SD quality" footage in it!!
    Curious why the 1/120 shutter, hoping to get better action motion?
    If you have a current timeline using the incorrect settings, go ahead and add a NEW Sequence with correct settings, open original sequence and "Select All" which is CRTL + A, then CTRL + C to Copy. Then go to the proper AVCHD sequence and Ctrl + V to Paste entire contents. You will now have the edited sequence moved into correct sequence settings. Now use Export and in AME choose "H.264 Blu-ray" and choose the 1080i preset and export, then use results in Encore. The Blu-ray should look excellent when done correctly.
    When exporting from AME, do NOT check the box for "Use Previews", as you want to encode direct from original source and skip any intermediate render clips.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Help - WRT400n how do I get better hard wired speeds

    I wanted to get better speeds while playing on-line on the PS3.  I bought the WRT400n router (I had the WRT54G) and it seems to be working ok.  I just hardwired the ps3 and the speeds are a little slower.  Wireless I was getting 12.0 Mbps down and 1.0 Mbps up, now wired I am now gettiner 10.0Mbps down and 2.0 Mbps up.   I numbers are lower wired, how come?  I have a new Cat 5 cable and I just had a direct cable dedicated to the router put in.  I thought I was going to see much better speeds.  Can anyone help me out?  I am very confused about the the speeds.  People were telling me when I hardwired I would get get speeds up to 50 to 100.  What am I doing wrong?
    Thanks..............

    On your Router setup page, below change the MTU size to 1365 and below click on Save Settings, then click on the Wireless tab and below change the Wireless Channel to 11 and click on Save Settings, then click on the sub tab under wireless "Advance Wireless Settings" and below Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
    Once you are with this settings, then click on the 'Security" tab and below Uncheck "Block Anonymous Internet Request" and click on Save Settings... 
    Now unplug the power from the Router and Modem,wait for 30sec and then first plug the power to the Modem and once all the lights are solid then plug the power to the Linksys Router. Now you can check the speed on your XBOX. 

  • Help - WRT400n how do I get better hard wired speeds on PS3 and Xbox 360

    I wanted to get better speeds while playing on-line on the PS3.  I bought the WRT400n router (I had the WRT54G) and it seems to be working ok.  I just hardwired the ps3 and the speeds are a little slower.  Wireless I was getting 12.0 Mbps down and 1.0 Mbps up, now wired I am now gettiner 10.0Mbps down and 2.0 Mbps up.   I numbers are lower wired, how come?  I have a new Cat 5 cable and I just had a direct cable dedicated to the router put in.  I thought I was going to see much better speeds.  Can anyone help me out?  I am very confused about the the speeds.  People were telling me when I hardwired I would get get speeds up to 50 to 100.  What am I doing wrong?
    Thanks..............

    On your Router setup page, below change the MTU size to 1365 and below click on Save Settings, then click on the Wireless tab and below change the Wireless Channel to 11 and click on Save Settings, then click on the sub tab under wireless "Advance Wireless Settings" and below Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
    Once you are with this settings, then click on the 'Security" tab and below Uncheck "Block Anonymous Internet Request" and click on Save Settings... 
    Now unplug the power from the Router and Modem,wait for 30sec and then first plug the power to the Modem and once all the lights are solid then plug the power to the Linksys Router. Now you can check the speed on your XBOX. 

  • When reviewing photos in Bridge by pressing the spacebar how do I get higher resolution photos

    In Bridge when I enlarge a photo by pressing the spacebar I have got to go to 100% to get a sharper picture, is there anything I can do to get a better resolution photo without having to go to 100%
    Regards

    Robbie2006 wrote:
    ... is there anything I can do to get a better resolution photo without having to go to 100%
    You might try setting monitor size previews (Edit > Preferences > Advanced, and you'll need to purge cache for the folders where you want to to try monitor size previews).  But this still produces soft previews for some users.  See the thread in this forum "Why do my images look soft in Bridge?"  http://forums.adobe.com/thread/1056763 -- particularly  the last 10 or so posts in that thread.

  • How can I get better video quality using my appleTV

    I have an appleTV (1st) and I want to get better quality from youtube videos, What should I do ?

    Welcome to the Apple Community.
    YouTube video does not come from the main YouTube site, it is specially encoded for the Apple TV and other devices that don't play flash. Generally quality is fixed with no way to adjust it and is often restricted by the quality of the video that has been uploaded.

Maybe you are looking for