How do I get camera roll pictures from icloud that have been backed up and then deleted from phone?

I didn't have enough storage on my iphone 5 to download ios7.  I backed up my phone to icloud then deleted photos on my camera roll.  When I got ios7 and went to update from icloud, the camera roll picutres didnt come back.  How do I get them back?

Welcome to the Apple community.
Camera roll photos may take a while to repopulate your new phone, are you sure you have given it long enough.

Similar Messages

  • My daughter accidentally restored her ipod4 to factory settings so I restored from the last iCloud backup. Her photos were all on camera roll so I believe should have been backed up, but none of them have been restored. Why?

    My daughter accidentally reset her ipod4 to factory settings so I restored from the last iCloud backup. All her photos were on camera roll so I believe they should have automatically been backed up, but none have been restored. Why?

    When she plugged in the ipod last night it backed up again so that now shows as the latest backup. No previous backups are listed so I do not seem to have the option to rerun the old one. She had many pictures on the camera roll taken from well before July. I can only presume that the backup in July must have been incomplete - but then I didn't think it was supposed to list as an option to restore from. Luckily many of the photos had been backed up on the pc but I am very frustrated as to why the icloud backup didn't protect them. Thank you for your advice though, I appreciate it.

  • How do i transfer camera roll pictures from a 3G to the 4S?

    how do i transfer camera roll pictures from a 3G to the 4S?

    Old Phone to New Phone
    http://support.apple.com/kb/HT2109

  • How do I get a numbers spread sheet to open where I left it and not start from the beginning every time I open it?

    How do I get a numbers spread sheet to open where I left it and not start from the beginning every time I open it?

    There is no built-in setting for redirecting a bookmark to a new tab.
    Is it possible that the computer which does that has an add-on such as the Tab Mix Plus extension installed? TMP has a setting for that (Events > Tab Opening).
    https://addons.mozilla.org/firefox/addon/tab-mix-plus/

  • My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

    My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I have ordered 3 albums from the itunes to my iphone and only 3-5 song from each album have been allowed to be downloaded to my phone yet i have still had to pay for the full album what do i do to get the other songs as im not happy to pay twice

    i have ordered 3 albums from the itunes to my iphone and only 3-5 song from each album have been allowed to be downloaded to my phone yet i have still had to pay for the full album what do i do to get the other songs as im not happy to pay twice

    carolinechx wrote:
    i know the description may be a little bit too confusing
    Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

  • How do I get rid of a dialog box that keeps coming back even though I press Cancel?

    How do I get rid of a dialog box that keeps coming back even though I press Cancel?

    I was looking up Olympic stats on  Norwegian website, and must have inadvertently clicked a link. The dialog box says: "There is no application set to open the URL nasjoner:2"
    It goes on to tell me to search the App Store , choose an application, or cancel.

  • HT201318 How can I get a storage plan on iCloud that's more than 50GB?

    How can I get a storage plan on iCloud that's more than 50GB?

    Welcome to the Apple Community.
    If you purchase a higher-tier storage plan for your iCloud account to replace your existing storage plan (for example, a 20 GB plan to replace a 10 GB plan), the existing plan will be canceled and you will receive a prorated refund for the time remaining. The new storage plan is applied to your iCloud account and the annual payment date is updated to reflect the purchase date for the new plan.
    http://support.apple.com/kb/HT4874

  • HT201272 How do i see a list of the apps that have been downloaded and the dates and times and amounts?  Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill.  HELP!!

    How do i see a list of the apps that have been downloaded and the dates and times and amounts?  Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill.  HELP!!

    See this -> http://support.apple.com/kb/HT2727

  • I have loads of photos on my iPhone that have been backed up on iCloud how do I see them on my iPad

    I have loads of photos on my iPhone that have been backed up on iCloud how do I see them on my iPad

    Photo Stream - http://www.apple.com/icloud/features/photo-stream.html
    iCloud: Photo Stream FAQ - http://support.apple.com/kb/HT4486

  • How to get camera roll pictures to computer?

    So I wanna get my camera roll pictures to my computer before I completely redo my ipod cause Im scared theyll be deleted. I know on computers with out windows 8 you can go to "my computer" and find you ipod name & get to your pictures. On the computer I want to use I have windows 8 (with all the colored tiles)
    Is there a way to still do that?  i plugged in my ipod to my computer & tried to do it but couldnt find my ipod name.
    if anyone knows what to do get them off & to my computer with out itunes & what i have to do isnt that complicated, please let me know.

    Try using the photo-management software built in to your computer's operating system:
    Mac OS X: Open Image Capture (located in the Applications folder).
    Windows XP: Open the Microsoft Scanner and Camera Wizard by choosing Start > All Programs > Accessories.
    Windows Vista: Open Windows Photo Gallery by choosing Start > All Programs.
    Windows 7: Choose Start > Computer. Right-click on the logo of the device under Portable Devices (if present) and choose Import Photos.
    Additional Information
    Windows 7 Ultimate N edition or KN edition may not recognize iOS devices as cameras if the Media Feature Pack is not installed. This is available from Microsoft as a download for Windows 7 N with Service Pack 1 and Windows 7 KN with Service Pack 1: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=31017ed3-166a-4c75-b 90c-a6cef9b414c4.
    above from:
    iOS: Unable to import photos to computer
    Have you installed any camera or scanner programs on your computer?

  • How can i remove items from list that have been deleted when i click on them it keeps showing empty

    how can i remove items from the list that have been deleted when i click on them it keeps showing folder empty

    Actually, Reader SHOULD keep showing documents that no longer exist, I disagree. It's no big deal, and people will quickly realise why they can't open the file. They open more files, the old ones move off.
    The REASON why it should not check is that checking whether a file exists can take a long time when things aren't good. For instance if a file server goes down, or a memory card is unplugged. That in turn would mean delays opening the File menu, and I've seen some software that can sit there for several minutes. That would really give people something of which to complain...

  • How do i get rid of 20,000 emails that have just downloaded onto my new 5s

    hi can anyone tell me how to get rid of 20,000 emails that have just downloaded onto my new 5s
    thanks

    Once in a while your e-m provider will make changes and you will get a large dump like that.
    I recommend using your web-based e-m to quickly delete them.

  • How do I get my trash basket to empty.  It counts up files and then stops without deleting contents?

    How do I get my trash basket to empty?  It counts up the items to delete but then stops and closes without deleting anything.

    Help here >  Mac troubleshooting: What to do when the Trash won’t empty

  • How to delete in iTunes for Mac some PDF files, previously synched with iPhone and then deleted from it?

    A while ago I synced some PDF files from my iTunes to my iPhone.  I've deleted those PDF files from my iPhone recently but now i'm trying to delete them from iTunes but can't.  How can this be done?
    P.S. Tried to select/highlight them (OK) and then to delete with cmd+Backspace - doesn't work 

    I am sure the URLConnection.defaultUseCaches is set before it is connected otherwise I should catch an IllegalStateException on conn.setUseCaches(false).
            try
                URL url = new URL("jar:file:/C:\\a.jar!/a.gif");           
             URLConnection conn = url.openConnection();
               conn.setDefaultUseCaches(false);
             conn.setUseCaches(false);
                Icon icon = new ImageIcon(url);
                System.out.println("icon size ? " + icon.getIconHeight());
                url.openConnection().getInputStream().close();
                System.gc();
             System.runFinalization();
                File file = new File("c:\\a.jar");
                while (file.exists())
                    file.delete();
                    try
                        Thread.sleep(10);
                    catch (InterruptedException ignored)
                System.out.println("file deleted.");
            catch (Throwable t)
                t.printStackTrace();

Maybe you are looking for

  • Why is it taking so long to  update my iphone 5 to ios 8

    Why is it taking so long(40 Hours) to update iphone 5 to ios 8?

  • The name of File when Saving New Keynote has "~" attached at the end

    When I do a save file in Keynote, the name of file has "~" attached at the end. It creates a new file so now I have two files which look like this: StolbaCh22.key StolbaCh22~.key Why is this happening? What am I doing wrong - can I delete either one

  • More exceptions

    i need to catch the exceptions if the input is not a number, not an integer, and out of range. I am not sure how to determine between the 1st 2 exceptions. i know i should use parseDouble and parseInt but how do both of these fit in? here is what i h

  • Function module get tables from view

    Hello, I am looking for a function module or something alike where I can find the tables used in a specific view. I know how to get the data from the view, but I only want the table names. Can anyone help?

  • How to reduce the usage of memory?

    I am using MacBook Pro with 8 GB ram. Without opening any window, the total usage maintain up to 6 GB or more from time to time.  I am not sure if it is normal. Anyhow, I am trying to close some unnecessary program in order to improve its speed.  Ple