How do I get case structure to recognize tab names?
I have a tab control. In my VI, I use a local variable reference to this tab control to switch a case structure. When I first made this program, it made sense to call these tabs CS0-CS13. Long story short, that no longer makes sense. I have changed the names of the tabs in the front panel, but in the case structure they still show up with the old CS names.
I tried deleting the local variable, recreating, and hooking it up to case structure, but no difference. If I manually delete the name CS out of the case structure and replace it with the new name, it doesn't recognize it.
In other words, it seems to be only remembering the name from the first time I created this tab. Where do I change this?
bmishoe wrote:
I'm using the same version...
Something (major) I somehow forgot to mention, although I'm not sure why it would make a difference....the CS names were temporary. I then programmatically change the names during execution because the final name of the tab I want to be dependent on what board the user selects. So the very first time I created the tab, I named them CS, then changed them programatically. The case structure still recognized them by their CS name, which makes sense to me.
In any event - these tabs are nested inside a parent tab. I just checked and you're right...on my parent tab, the changes show up immediately. So I'm thinking this has something to do with the fact that I change them programatically. But still...that info has to be stored somewhere, but I don't know where.
Hmmm, I think it might be time for some code.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.
Similar Messages
-
How can I get auto correct on my iPhone 4 to recognize a name that is already in my address book? It doesn't recognize it and offers no suggestions.
The cleanest way to get things straight now and as you proceed into the future with Time Machine is to start over. If the new machine is setup the way you want and has all the data placed onto it I suggest you erase and re-format the TM backup device and start a Full initial TM backup.
I believe this will pay dividends now and over time and avoid future problems for you. Jst before going to bed crank up the Full TM backup and it will be all done by morning time. -
After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
How do I get my itunes to recognize my account, it seems to be stuck on my friend account even when my ID show up as sign in, only when I try to update an App, that my friend account appear. I try to reset it on the computer and the phone itself, but no luck. Please advise
Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg -
when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?
What version of iTunes are you running on your computer? You need to update to the current version.
-
new iphone. (someone else put in their username and password. so i had lots of apps that i had to eliminate but do NOT wish to compromise the contact list) time for me to update the iphone. downloaded itunes onto pc. plugged in iphone and waiting for prompt to show phone. pc thinks it is the camera. how do i get itunes/pc to recognize iphone ? then, how do i backup contacts and proceed before updating iphone?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes or iPhone forums.
Regards. -
I recently got an Iphone and after I installed it on my computer my 2 ipods are no longer able to sync to the computer how do I get the computer to recognize the 2 different ipods so I can still use them?
Since you already had two iPod before getting the iPhone, what exactly did you need to "install" to use the iPhone? Doesn't it use to the same iTunes installation you already used with the iPods?
So, I guess my question is, what changed on the computer when you started using the iPhone?
What happens now when you connect the iPod? Is the iPod still seen in Windows device manager? -
I recently changed my email address and updated my password. However, when I connect my iPhone 4 it defaults to my old email address which is no longer valid. How do I get my phone to recognize my updated email address and how do I now change the iPhone 4 to recognize the new address? I wish to delete all reference to the old address. All help would be appreciated.
Hi.
Here is a procedure that should help.
1. Go to "Settings"
2. Go to "Mail, Contacts, Calendars"
3. Click the account you don't want anymore
4. Go to the bottom and click "Delete Account"
5. Confirm the deletion
6. Go back to "Mail, Contacts, Calendars" (if you're not there already)
7. Add your new account -
my non apple laptop died, got new laptop, how do i get my phone to recognize new laptop?
Plug it in and sync it
-
How to I get the iPad to recognize a number beginning with 0 without it cutting off the 0
How do I get the iPad to recognize a number beginning with 0 without dropping the 0. And how do I get the iPad to recognize a 4 (birth year) or 5 (zip code) digit number with adding a comma delineating it to thousands?
Hi,
Because the iPad requires more power than from a normal USB port can supply therefore you can not charge an iPad using ONE USB port on a laptop/PC. Please try this free utility, many HP users say it works:
http://event.asus.com/mb/2010/ai_charger/
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How can I get Log Express to recognize my external keyboard? - NEWBIE
I'm using a Lexicon Lambda phantom powered converter (I think that's what it's called) to run my Left and Right 1/4" cables to, from my Kurweil master out. Then the USB cable from the Lexicon out, to the Mac. How do I get Logic Express to recognize the Kurzweil so I can record the Kurzweil's on-board sounds rather than using it as a Midi controller?
Very new to Logic and all of this-any help is appreciated in layman's terms.OK - got logic to recognize the Kurzweil keyboard on a new track, I can hear the on-board Kurzweil piano sounds, but Logic is not recording it. what gives?
-
How do I get Application Manager to recognize that Photoshop is not installed?
Application Manager says that Photoshop CS6 is installed. It isn't. I've rebooted the Mac and it still says it's installed. What installed was a partial or corrupt file which I have trashed. How do I get Application Manager to recognize that Photoshop is not installed so I can download and install it again? Thanks.
Do you have an uninstaller available to you in the Applications/Utilities/Adobe Installers folder? If so then please run the uninstaller.
If you don't then please utilize the uninstallers available in this folder to remove all currently installed Adobe Creative Software. You will then want to follow this by running the CS Cleaner tool. You can find details on the use of the CS Cleaner tool at CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html. -
How can a get my iMAC to recognize a newly installed optical drive?
I recently ordered a new Optical drive for my iMAC 12,1 to replace a damaged one. I followed the instructions online to replace the drive with no issues. I restarted the iMAC and it will not recognize the new optical drive. The optical drive won't accept any disks either. The optical drive is
Model GA11N
Manufacturer: HL
Condition: Brand New never used, without original manufacturer packaging
SATA interface, Slot-in loading, 12.7mm in height, without faceplate, no eject button. 1 Year Warranty
with Apple Logo, Special for Apple iMac Intel 20" EMC 2266 A1224 21.5" 2308 27" 2390 2309 2374 Mac Mini Mid 2010
Write Speed: DVD-RAM :5X DVD+R :8X DVD+R DL :4X DVD-R DL :4X DVD+RW :8X DVD-R :8X DVD-RW :6X CD-R :24X CD-RW :24X Read Speed: DVD-ROM/DL: 6X CD-R:24X CD-RW: 24X CD-ROM: 24X
How can a get the iMAC to recognize this new optical drive?Here are some sources for Mac compatible optical drives that wiil work with your 2011 iMac.
http://eshop.macsales.com/item/OWC/VLU2SD24XS/
http://eshop.macsales.com/item/OWC/MR3F82SD24S/
http://www.amazon.com/Aluminum-External-Super-Drive-Apple--MacBook/dp/B007FUDKB4 /ref=sr_1_1?s=electronics&ie=UTF8&qid=1392328000&sr=1-1&keywords=mac+compatible+ dvd+drive
http://www.amazon.com/External-Super-Drive-Apple-MacBook/dp/B009XON646/ref=sr_1_ 3?s=electronics&ie=UTF8&qid=1392328066&sr=1-3&keywords=mac+compatible+dvd+drive
http://www.amazon.com/LG-Electronics-Portable-External-GP40NB40/dp/B009DS6OFU/re f=sr_1_8?s=electronics&ie=UTF8&qid=1392328138&sr=1-8&keywords=mac+compatible+dvd +drive -
How do i get my ipod to recognize my new computer
How do I get my ipod to recognize/sync with my new computer?
follow the steps given here...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
How do i get my computer to recognize my computer
how do i get my computer to recognize my computer
Hi, edwin5095.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue persists, try all remaining steps in the article below.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Cheers,
Jason H.
Maybe you are looking for
-
Macbook pro wifi security won't let me connect to public/login networks
I recently purchased a new Macbook Pro retina switching from Windows to Mac. One very frustrating thing I have found is that I am unable to connect to public wifi spots such as AT&T in Barnes and Noble. I read that a security udpate requires that the
-
Issue: iPad Mini just got updated I come home and it is at the recovery screen (connect to itunes screen) I plug it in and nothing doesnt even come up I tried the all the ports and nothing and they work with my iPhone. I have pressed the home and pow
-
What do I need to disable to get a flashplayer update to download
I can't figure out how to get adobe flash player update to download, so I can play games on facebook
-
[Solved] Anki problem, doesn't launch. [Solved, my fault]
What do I do? I've got the actual version from the repositories. Status: Installed Local Version: 0.9.9.8.5-1 Version in the Repository: 0.9.9.8.5-1 $ anki Traceback (most recent call last): File "/usr/bin/anki", line 31, in <module> ankiqt.run() Fil
-
Need help to solve the above problem....I don't see any option like "free" or "install" to add the APS on my iPhone.