How do I get CLI mode on a Cisco SF 302-08 switch?

I can access the switch OK using http and have enabled telnet. However, when I telnet to the switch, I just get the
                             Switch Main Menu
                               ================
                         1. System Configuration Menu
                         2. Port Status
                         3. Port Configuration
                         4. System Mode
                         5. Help
                         0. Logout
Question is, how do I exit the menu to get the CLI prompt up?.

Hello Philip,
Please make sure you are on the latest firmware version as the CLI was not added until just recently.

Similar Messages

HP Phoenix 8-core - how do I get XP Mode to work in Windows 7 64-bit?

My Computer: HP Phoenix 8-core, 12 GB Ram, over 1,000GB hard drive space, Win 7 SP1 with current updates. Downloaded and installed the following: Windows XP Mode with Windows Virtual PC, the hotfix MS provided for AMD multicore, and the MS Hardware-Assisted Virtualization Detection Tool which informed me that my computer does have hardware-assisted virtualization. I have done EVERYTHING Microsoft has advised.
How do I get XP Mode to work?

Frank, thanks for the help. That Microsoft article is the one I read yesterday morning. I again just now went into the BIOS as follows: Security, System Security-Data Execution Prevention AND Virtualization Technology were both enabled. So I saved changes and exited. My computer is running Windows 7 Professional 64-bit.
This is my system information:
OS Name   Microsoft Windows 7 Professional
Version   6.1.7601 Service Pack 1 Build 7601
Other OS Description    Not Available
OS Manufacturer   Microsoft Corporation
System Name   HPPHOENIX
System Manufacturer   Hewlett-Packard
System Model   h9-1100z
System Type   x64-based PC
Processor   AMD FX(tm)-8150 Eight-Core Processor, 3600 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date   AMI Ang_716, 4/5/2012
SMBIOS Version   2.7
Windows Directory   C:\Windows
System Directory   C:\Windows\system32
Boot Device   \Device\HarddiskVolume1
Locale   United States
Hardware Abstraction Layer   Version = "6.1.7601.17514"
User Name   HPPHOENIX\Debbie
Time Zone   Eastern Daylight Time
Installed Physical Memory (RAM)   12.0 GB
Total Physical Memory   11.8 GB
Available Physical Memory   10.2 GB
Total Virtual Memory   23.6 GB
Available Virtual Memory   21.7 GB
Page File Space   11.8 GB
Page File   C:\pagefile.sys
I downloaded and installed the Windows XP Mode. The
I downloaded and installed the Windows Virtual PC. (not the 2007 version-tried that the first time and seen it did not work).
I applied the "fix" for AMD motherboards.
I just tried to install XP Mode again--I got almost to the end, the I got the following error message in a rectangle box:
"Windows XP Mode-Windows Virtual PC
Could not complete Setup. Please try again."
The has happened over 7 times. Yesterday evening before I posted on this forum, I uninstalled, deleted everything, restarting the computer after doing each step, went to website yet again, redownloaded everything again, and tried to install once again. Still the same message. Any help or advice is certainly needed and appreciated. Debbie

How can I get sleep mode back to my RAZR M since it went away with the latest upgrade?

How can I get sleep mode back to my RAZR M since it went away with the latest upgrade?
Thanks

Hi aztigger!
Good news! You can still put the screen into sleep mode under Settings > Display > Sleep. Let me know if that helps!
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport

How do I get draft mode on HP Officejet 4500?

How do I get draft mode with an HP Officejet, 4500 other than in text edit?

Hi sdtvghjyctu,
Here are the steps to register your printer with ePrint and get the printers email ID.
1. Connect the printer to a wifi network with internet connectivity.
2. Let the printer fetch the IP address.
3. Click on the ePrint Icon on the printer and continue with the process of registration.
4. The printer will guide you through the rest of the process.
5. An Information sheet will be printed at the end of the process which will contain the code.
6. The Code followed by @hpeprint.com will be your printers email ID.
Claiming your printer in eprintcenter or HPConnected will enable you to secure your printer, add apps and many other features.
I hope this helps.
Kind Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

LiveCycle Designer won't preview with Reader DC. Preview mode will not work. Attempting to preview gets errors (507:507), (103:103), and sometimes crashes LiveCycle Designer. How do i get preview mode?

I can not get LiveCycle's preview mode to work. It has worked in the past, but now with Reader DC i can't use preview mode. How do i get Adobe LiveCycle designer to work with Reader DC?

nikg-fh schrieb:
it seems the problem is caused directly by adobe reader X.
I just have started a new descussion here (adobe reader forum).
If anyone could help me, feel free to do so!
my configuration:
windows xp pro
adobe reader x
adobe livecycle designer 9 ( therefore it is not an version 8 issue )
admin rights on the pc ; )
I might add that you are not alone!
I am having the same problem (LSD ES2 (version 9.0.0....) and Adobe Reader X and Acrobat Professional 8)
Whenever I save a form as PDF and open it with Reader or Acrobat I get to see the console.
But never when I view the form in Designer preview!
That used to work until I installed Reader X.
Same as you I checked all configurations in Reader and Acrobat: all perfect.
I really do hope that someone finds a solution for this.
PS. This problem should be discussed in THIS forum. It is clearly a Designer problem!

How Do I Get Turbo Mode CPU Frequency Information? [AMD A6-3420M]

Hey guys. Just about everything reports my maximum frequency is 1.5GHz and under heavy load it shows my current frequency is 1.5GHz. I've read quite a bit of posts about similar CPUs and I'm assured that turbo is in fact working. Is there any tool available to measure it though? i7z is for Intel processors only and tpc outputs a lot of errors (and also doesn't seem to offer a convenient way to see the current frequency but I couldn't play with it much as most options output an error, it got my temperature just fine).
I just want to know because I do play with overclocking on Windows, I'd like to ultimately achieve such a setup on Arch. It's not an absolute need but I do like to know what frequencies my CPU is running anyways .
Cheers!
Last edited by titegtnodI (2012-11-16 01:14:22)

try cpufreq-aperf, it gives me correct turbo for interlagos based cpus, but doesn't work for magny cours (aperf is not available). i suspect aperf is available for the A6 (cat /proc/cpuinfo|grep aperf)

How can I get ACE demo license in cisco?

Hi everyone,
I would like to get ACE demo license..
minimum 50VC and 16G bandwidth to demo on my customer site.
But I can't find the demo license in cisco
Now I use the cisco ACE demo, I can't open service request to get license , due to demo device,
Thank you

HI,
To get the ACE demo licenses, contact your Cisco account representative.
As per my knowledge there is no link where you can download the demo license. Or the other way is to contact the cisco licensing team providing your device data.
Regards,
Inayath.

Trying to use airplay mirroring on ipad air. The airplay switch does not show in control panel, only airdrop. How do i get airdrop out of the way to find airplay switch?

NO airplay switch in control panel, only air drop. How do I find airplay switch?

Unplug the Apple TV then plug it back in, do the same for your router, then reset your iPad by holding down the home and sleep buttons, waiting for the Apple logo, then let go of the buttons.

Why has my app icon randomly changed and how do I get it back

I started up my ipad 4 this morning and one of my icons has changed for no reason. Any idea how this has happened or why but more importantly how do I get it back?
I've tried restarting and switching it off again to no avail. As it's a corporate app I can't delete and reinstall.
Any help appreciated.
Thanks
Thom

No, there is no way to customize icons in iOS. The only thing I can think of why this might happen is this...
Corporate developer accounts have the ability to develop and distribute apps outside the app store. This also means the apps do not undergo the same testing process as commercial apps and more importantly, it means that apps developed by enterprise developer do not have to have what is called a unique Bundle Identifier. It's essentially what identifies the app. Usually the bundle identifier is unique and formated as a combination reverse domain plus some details about the app. For example, com.companyname.appname or com.apple.voicememos.
It's possible the developer decided to use a bundle identifier similar or the same as the app that uses the icon that is appearing on your device. When you update your personal apps, the App Store might have gotten confused.
It's also possible the developer used a placeholder icon and simply forgot to replace it before you installed the app then fixed it later after someone gave him the proper icon.
Have your IT group delete and reinstall the app and I suspect you will be ok.

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

Hello Apple? How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I am currently living in Europe and using my iPhone on airplane mode only with wifi. My iMessage switched to my e-mail account and when I go to the settings to switch back to my phone number that isn't an option to click on. How do I get it back?

I am currently living in Europe and using my iPhone on airplane mode when I have wifi. My iMessage is switched to my icloud e-mail address and when I go to my setting to switch it back to my number, it is grayed out and not an option to click. This was working before with my number so I know that it's not from being on airplane mode. How do I get it back to my number?

They need to go into their settings>messages and make sure iMessage is on. Also they should click on the send & receive button to make sure their phone number is selected.

How can I get to DFU mode with a broken power button?

How can I get to DFU mode with a broken power button?

aarons84 wrote:
This is bad, but i tried jailbraking my iphone
You may as well stop there. We can't help you.

How can i get my iphone, from the disable mode

how can i get my iphone 3gs, out of the disable mode?

If your phone is disabled because you forgot your passcode, restore the phone on the last computer it was synced with. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device. See http://support.apple.com/kb/HT1212.

How do I get from a menu at login to CLI on a SG300-28 Switch?

I have a SG300-28 and would like to configure through CLI not menu. How do I get to Cli from Menu?
I am running Boot version 1.0.0.4 and SW version 1.0.0.27, Do I need to upgrade both boot and SW or Just SW?

Hi rod3,
Typically SSH/Telnet is disabled by default on devices. In order to activate it you will need to go through the WEB GUI to Security > TCP/UDP Services and check the boxes that say SSH or Telnet then click apply.
Then using a Terminal program of your choice you can connect to the switch and configure it. Be advised that the CLI is not exactly the same as regular IOS.
-Trent Good
** Please rate useful posts! **

How do I get CLI mode on a Cisco SF 302-08 switch?

Similar Messages

Maybe you are looking for