How do I get date and time component from a DATE object?

Hi All,
I need to get date and time separately from a DATE object, does
anyone know what function I should call? GetDate()? GetTime()?
I need this in a SELECT statement.
Thanks in advance and looking forward to your early reply.
Regards.
Gladywin
30/11/2001

Hello,
See following SQL.
select to_char(sysdate,'dd/mm/rrrr') today_date,
to_char(sysdate,'hh24:mi') now_time
from dual
Adi

Similar Messages

  • How to know date and time information from Trace File defaultTrace.X.trc?

    Hi, all.
      i'm using EP 6.0 SP9 patch 1.
      As you know, default trace is written in the <SID>\JC00\j2ee\cluster\server0\log\defaultTrace.X.trc.
      By using the default trace formatter, it shows like the following sample messages.
    #1.5#0011110E7B2000590000000100000A100003EC71562E6EBC#1104396451585#com.sap.jms.server.ServerClientAdapter##com.sap.jms.server.ServerClientAdapter#Guest#18####716257115a3f11d9b73b0011110e7b20#SAPEngine_Application_Thread[impl:3]_23##0#0#Error#1#/Applications/JMS#Plain###JMS internal error at ServerClientAdapter! JMS Service is not started!#
      My questions are
      1. how do we retrieve the date and time information from the above message? It seems that this message has date and time info because LogViewer shows the date and time based on the above message.
      2. how do we change the above date format to easier one
    like "YYYY:MM:DD:hh:mm:ss"? i know that it can be configured from the Visual Admin --> Services --> Log Configurator but i don't know the exact place for the trace file.
      Thanks.

    Hi Sejoon,
    I use the standalone Logviewer to read the log files. Works great.
    "If you have an SAP Web Application Server Java 6.20 or below you may also get a standalone_logviewer.zip file at the SAP Service Marketplace at service.sap.com/download &#8594; SAP NetWeaver &#8594; Release ‘04. In this case JDK version 1.3 or higher must be installed on the system. The java version must be same on the server and the client.
    In the SAP Web AS Java 6.30 installation a folder named logviewer_standalone can be found under: <path Of J2EE installation>/<SysID>/JC<nr>/j2ee/admin/logviewer_standalone. Verify that the batch file logviewer.bat is installed in the directory logviewer-standalone.
    (source -> http://help.sap.com/saphelp_nw04/helpdata/en/e4/540c404a435509e10000000a1550b0/frameset.htm)
    Best wishes,
    Noel

  • How do you edit out the date and time stamp from a photo

    How do you edit out the date and time stamp from a photo

    You can blur it out with retouch
    The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
    Regards
    Léonie

  • What happened to the Get/Set Date and Time utilities from RT 7.1?

    I'd like to use the Get/Set Date and Time utilities that were available in 7.1, but disappeared after that. I see that the 7.1 utilites  call a dll that does not appear to be installed with LabVIEW RT 8 and later. What do I need to do to use the utilites from 7.1 that do not appear in later versions?

    In Labview 8.2 and later there are two directories for vi.lib. settime.dll is located in National instruments\Labview 8.2\Targets\NI\RT\ vi.lib
    This is the dll you want to use in order to call it use the same Vi as in 7.1 (RT set date and time.vi) and link it to the correct dll.

  • How i can change the arabic date and time mode to english date and time mode

    how i can change the arabic date and time mode to english number mode

    Settings app > General > International > Region format.

  • How to set the date and time format from Windows Server 2008 R2

    Hi,
    I want to control my client's date and time format as dd/mm/yyyy format and I need to do it using the windows server 2008 R2. How can I achieve this goal?
    Yoshika04

    Hi,
    In Windows Server 2008 R2, you can use Regional Options Extension in Group Policy Preferences to configure the date and
    time format. For more information, please refer to:
    Regional Options Extension
    http://technet.microsoft.com/en-us/library/cc754496.aspx
    Regards,
    Bruce

  • LR2 File naming on import problem, date and time not from photo

    Hi all,
    I think I've run into a bug or inconsistency regarding the file naming in LR2. All my photos are named after the template YYYYMMDD-HHMMSS-XXXX.dng, where XXXX is the original file ID number and the rest is the capture date and time. This has worked excellently in 1.1 through 1.4.1.
    In LR2 this template, on import, doesn't use the capture time from the photo for naming but rather the _current_ time when the import happens. In the template editor you don't get to choose what time to apply, as the fields are simply called "Minute", "Second", etc.
    If I, however, use the function Library > Rename photos... on the new batch of photos after import, and apply the exact same template, they are correctly renamed to match their capture date.
    This is with LR 2.0 on Mac OS X 10.5.4 on PowerPC. Anyone else see the same thing?

    This is a reported bug.

  • Date and time missing from menubar

    The date, time, battery, wifi, and spotlight icons have all disappeared from my menubar. I went into my preferences and found that the "show date and time in menu bar" was unchecked so I tried to check it, but it would automatically uncheck itself instantly. I tried rebooting but that didn't change anything

    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Preferences/com.apple.systemuiserver.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Show Info in Finder
    from the contextual menu.* An Info dialog should open.
    Does the dialog show "You can read and write" in the Sharing & Permissions section?
    In the General section, is the box labeled Locked checked?
    What is the Modified date?
    If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • DataMart Interface - Date and time of the transferred data

    Hello,
    We have a requirement to build a datamart (cube to cube) between two BW systems, using deltas; this is OK and should not present any issue. However a further requirement has arisen, requiring to provide date and time of the created files to outbound systems. I have been looking to RS* and RO* tables for finding out the details of the delta queue.
    Table RSDMDELTA provides the Data Mart Delta Management: could this table be used to provide required details? Or are there any other relevant tables containing this info?
    Thanks&Regards,
    Begonia

    Hi,
    Thanks for your quick response. We are not using openhubs, but a direct cube to cube datamart - by generating the cube as exporting datasource.
    Is there any equivalent table in this case?
    Thanks&Regards,
    Begonia

  • How to delete the date and time column from a waveform spreasheet file

    after acquiring a signal through the DAQ i am writing it in a spreadsheet. but for further post processing of the data the date and the time column are unneccessary. is there some way to format the file in labview so that those columns are removed. the DAQmx read  gives as output a 1 d array. so i could not find a way to select only the Y column

    If you are getting a 1D array from the DAQmx Read, then you don't have any date/time information to write and if you are using the Write to Spreadsheet File, there should be no way you can have the date/time information in the file. Whatever you hjave programed to put the date/time into the file, don't do it.
    p.s. You may not think you need timing information but for a lot of post-processing, it is essential to have. If it's in the file, you can always ignore when you read it and if you later find out it's necessary, it will already be there.

  • Extracting date and hour component from time stamp in diadem ?

    Hi all, 
    I am just getting started with DIADEM.
    I have a column with time stamp format as 4/12/2014  12:03:00 AM, i need to extract date and hour compenents only and store in another column.
    Can anyone please give me some lead on this?
    Please ask for extra infor if required

    Hi figured it out.
    I used this.
    str(chd(i,"P1_ACCH_1/Time_Stamp"),"#MM/DD/YYYY hh"))

  • Accomodating date and time in a single Info object

    Hi Gurus,
    We are getting an R/3 field(2 fields) as "YYYY.MM.DD HH:MM:SS". And we have mapped that fields to a Two IO (CHAR).Data is getting loaded fine,but not getting it in the same format (with required DOTS and COLONS).Is there any routine that I can write for this IO.If any one have it ,please pass it on.
    The two info objects are : ZCREATE & CHANGEDAT are mapped to "created_at" & "changed_at".
    Please tell me step by step code.
    Points wil be assured.
    No idea on how to write a routine .
    Urs,
    Rakesh.

    Hi
    i am getting an error after doing that.
    E:Field "COMM_STRUCTURE-/BIC/ZCREATE" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement.
    Below is my Code.
    $$ begin of global - insert your declaration only below this line  -
    TABLES: ...
    DATA:   ...
    data l_ZCREATE LIKE COMM_STRUCTURE-/BIC/ZCREATE.
    data l_ZCREATE1 LIKE COMM_STRUCTURE-/BIC/ZCREATE.
    data : l_year(4) type c,
    l_mon(2) type c,
    l_day(2) type c,
    l_hh(2) type c,
    l_mm(2) type c,
    l_ss(2) type c.
    $$ end of global - insert your declaration only before this line
    $$ begin of routine - insert your code only below this line -
    IF NOT COMM_STRUCTURE-/BIC/ZCREATE IS INITIAL.
    l_/bic/ZCREATE = COMM_STRUCTURE-/BIC/ZCREATE.
    l_year = l_ZCREATE+0(4).
    l_mon = l_ZCREATE+4(2).
    l_day = l_ZCREATE+6(2).
    l_hh = l_ZCREATE+8(2).
    l_mm = l_ZCREATE+10(2).
    l_ss = l_ZCREATE+12(2).
    concatenate l_year '.' l_mon '.' l_day ' ' l_hh ':' l_mm ':' l_ss
    into l_ZCREATE1.
    RESULT = l_ZCREATE1.
    ELSE.
    RESULT = COMM_STRUCTURE-/BIC/ZCREATE.
    ENDIF.
    RETURNCODE = 0.
    Please Correct me where its wrong.
    Urs,
    Rakesh.
    null

  • How do I get the client IP Address from the HTTPServletRequest object

    Hi ppl,
    How do I get the IP address of the client machine from the HTTPServletRequest object?
    Thnx in advance,
    Manoj

    Take a look at: http://java.sun.com/products/servlet/2.2/javadoc/index.html and check for the ServletRequest Interface.
    Be aware also if your web server is using proxy, proxyReverse and so because you could end getting the servers' IP and not client one.

  • How to prevent calendar from deleting dates and times from event names?

    Calendar automatically discards date and time information from titles of new events. For example, creating a new event with the text "Staff Meeting 9 a.m. board room" leaves only "Staff Meeting". Calendar discards the "9 a.m. board room" information without asking. This feature is not helpful to me. How do I disable it?

    >
    Apple Support Communities > Mac OS & System Software > OS X Mountain Lion > Discussions

  • How to display the current Date and time in xslt version 1

    i am using xslt version 1 .i want to display the current date and time in the output xml using xslt(Jdeveloper) ..i just added the namespace xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
         xmlns:ns1="urn:oracle:integration:b2b:7D30046DC68A4FA689956D8241FA3B99">
    and used thsi function <xsl:value-of select = "xp20:current-date()"/>
    but it does not works for me ..help needed????
    Edited by: user9519185 on Jan 20, 2009 3:04 AM

    Use a formula: =NOW()
    Format the cell for Date and Time, with both the Date part and the Time part displayed. Format the two parts as you wish, using the choices in the Inspector's menus.
    The cell will update each time the table is recalculated.
    (Description is for Numbers '09 (Mac), Numbers for iOS will be similar, but not necessarly identical in details.)
    Regards,
    Barry

Maybe you are looking for

  • How can I build a double scale chart using iPad Numbers? Is it possible??

    Hi everyone, I would really like to know how I can create a double scale chart using Numbers app for iPad. Should I have the following data, how can I put together in the same charts? Year: 1-2-3-4 etc (Axis X); AuM: data1, data2, data3, data4 etc (A

  • Problem uploading enhanced and crop photos

    When I upload enhanced and crop photos from my iPad2 to Dropbox the original photo gets uploaded. I am using the native iPad photo app on my iPad2 to enhance and crop  I see that there are others with similar problems but no real solution. Don't know

  • Brand new snowleopard - mp3's refuse to import!!

    i just unwrapped my brand new imac today, and already i'm having trouble. i have tried dragging .mp3's into i-tunes, double clicking on them, importing them, dragging them into the folder ect ect..... i can't get a single mp3 to import into the libra

  • Maintaining a hyperlink bookmark to another document

    Hello, I have a word document that contains hyperlinks to a bookmarked location in a different word document (2007).  The hyperlinked bookmark works great when in word.  Opens up the 2nd document and goes straight to the bookmarked location.  Once I

  • Files in archive and throws error when connected it thru Import mger

    Hi all, File which was in archive folder i copied it to desktop and connected it thru Import manager with same port and map. But i could not able to import this xml file because 1 field value was not mapped in the IM as this filed was look up to some