How do I get 'Date

My company has proxy servers that require a password to access. The password changes each day. So the control panel Date and Time cannot access the servers, because there is no provision for using proxy servers that require a password for each new connection. Any ideas? It's really annoying because my Macbook Pro gains about a minute every other day, so I keep showing up to meetings really early unless I set my clock once a week.

Open the Network preference pane in System Preferences. If the pane is locked, unlock it. Select the interface you use to connect to the Internet. Click the Advanced button and the Proxies tab in the sheet that opens. Check the box labeled "SOCKS Proxy." Enter the address and port number of the proxy server (I'm assuming it is a SOCKS proxy), check the box labeled "Proxy server requires password," and enter the username and password for the server. Click the OK button to close the sheet, then Apply, then close the window.
Obviously you'll have to reenter the password whenever it changes.

Similar Messages

How can I get Data from the Sound cart in Labview? Does a VI exist?

How can I get Data from the Sound cart in Labview? Does a VI exist?

Yes, there are VIs for acquiring data from Sound cards. And examples too. If you don't have LabVIEW yet, do a search on NI's site for example VIs.
Khalid

How can i get data from another database SQL Server use database link from

I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?

hi,
u should see following documentation:
Oracle9i Heterogeneous Connectivity Administrator's Guide
Release 1 (9.0.1)
Part Number A88789_01
in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
regards
umar

How do i get data from a structure using join?

hi,
what is the actual use of a structure.?
my problem is :
KUAGV is an existing STRUCTURE. it has got one fields each which links to MARA, AND VBKD tables. i want to fetch all related information from KUAGV, mara, vbkd . which is the better way : using joins or views or anything else? how do i
get data from a structure using join?

structure temporarily holds any data passed to it dynamically throughout the runtime but doesnot store it permanently. so
a structure cannot be included in a join.so instead of incuding structure KUAGV's field in a join
search the transparent table in which same field are present and use it in join.
A structure if created in DDIC(Data Dictionary) is a global DATA STRUCTURE which is used to group related information, for example you would group all the details of your bank account into a structure BANK_ACCOUNT that contains fields like account_Id, account_holder_name etc.
If you create a structure in your program then it is local to your program. So you use this structure to create data holders of this DATA TYPE to hold data in your program.
Edited by: suja thomas on Feb 11, 2008 6:24 AM
Edited by: suja thomas on Feb 11, 2008 6:31 AM

How can i get data from a maintance view?

Hi all.
    Can you give me some suggestion about 'How can i get data from a maintance view?'?
     Thanks
     Best regard

hi
good
go through this link
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ecdf446011d189700000e8322d00/content.htm
thanks
mrutyun^

How do I get data back on my Numbers created inventory that was supposedly removed by spotlight?

How do I get data back on my Numbers created inventory that was removed by Spotlight recently? It seems to have happened after upgrading.

Thanks for your reply. Unfortunately when I click on "revert to" it shows no document. It's very strange that the rest of my old inventories on numbers remain. It is only my 2014 entries that went into a black hole somewhere. When I click on my inventory pages it says: "OS X spotlight search information was removed." It seems to have occurred after I recently updated Numbers. I never did anything to have it removed and never got any kind of warning to my knowledge that it was about to be removed. Very frustrating!
Linda

APEX CSS - How do I get data in report columns to wrap?

I found information here http://www.orafaq.com/wiki/APEX_FAQ
About How do I get data in report columns to wrap?
This works and another way to do it is by adding the CSS directly into the
Home>Application Builder>Application 137>Page 1>Report Attributes>Column Attributes page
in the Column Formatting area. I added 'white-space:normal' and this works in FF but in
IE it has a different behavior.
In FireFox
testasdgadhad
gadfadgadgadg
adgafhsrgjsgnsfg
nsdfbadfafhafha
dfhadfh
In Internet Explorer
testasdgadhad gadfadgadgadg adgafhsrgjsgnsfg nsdfbadfafhafha dfhadfh
Is there a way to force it so it display in IE the same way that it displays in FF?
The correct display format is FF.
Thanks,
Nestor :)

I have try this because I found it during a search and it makes no difference in IE.
This is what I am using now 'display: block; width: 100px;max-width:100px;white-space:normal'
I also tried 'display:block; width:500px'
If I use the values 'normal' or 'pre' for white-space' it works in FireFox but not in IE, The display block
does not seem to make a difference. It seems that all I need is 'white-space:normal' but again
it does not works on IE.
Thanks,
Nestor :-)

How do I get data off my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP!

how do I get data off my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP! I got married last week on holidays and have not had a chance to save photos yet.

Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling

How can i get data from anather database system ????????

Hi every body..
I 've a problem .....
I've an old program work on "DOS" and it's content database which content all Data that i need for that program
The data file extension with ".FD" , ".VW" , ".LSS" & "SLP"
I want to kow:-
1) what is that database system
2)What program could open or can get data from that database tables.
3)can i do that with oracle...
please describe every thing in details...
... Please replay quickly... urgently
...waiting your answer....

You're probably better off consulting the documentation for the DOS program you're trying to deal with than hoping someone here will be able to guess what program you're using, identify the structure of the files, and tell you how to extract the data into something Oracle can import.
Justin

How do I get data from a pc external hard drive to my mac

I am about to purchase an Air. I have an external hard drive I have used for years with my PC. It has countless pictures and music. How can I get that data from my PC external drive to my new Air and also to the Time Machine?

Thank you for your reply. It is a Western Digital external USB 3.0 formatted for PC. It includes pics, videos, music, documents, power point, etc. would it still just be a drag and drop?
Thanks!

Iphone sync is making me crazy how can I get data to and from my iphone without syncing?

I'm a pc user and i'm sick of the iphone sync process jacking up my life when I decide to reinstall windows and the old itunes data is no longer there. how can I etup my iphone to not have to sync but transfer data to and from it like an android?

The only way to get data onto the phone is by syncing. To get some photos off the phone you can connect the phone to the computer with USB cable and use windows explorer to view and copy the photos from the phone to the computer. You could use a program like ibackupbot or something similar on your computer and get data off the phone to your computer using that

How can i get data from standard report 'PP_ORDER_PROGRESS'?

When I have a sales order,i want get Production Orders & Plan Order related to this SO.
The same as result of standard report 'PP_ORDER_PROGRESS'~~
How can I get the same data like report 'PP_ORDER_PROGRESS'~~
TKS very very much~~

Lorry,
I hope you are looking for an option similar to CO46 transaction.
You can use transaction COOIS, activate "Production orders" and "Planned orders" check box and in header level selection input your Sales order number to get a report you wanted.
Regards,
Prasobh

HT4623 How do I get data to work on my AT&T gophone

How to get data to work on AT&T gophone iPhone I bought data plan but can't get it to work.

T-Mobile in the U.S.?
If so, with an iPhone purchased as officially unlocked in another country, or with an iPhone purchased in the U.S. that has been hacked to be unlocked?

How can we get date period in out put screen as a header (PLS Urgent)

Hi frdz,
In ad hoc reports client want to get date field in out put screen as per selection screen date priod.
Kindly let me know how can we get the same.
EX: My report selection peiod is 01.01.2006 to 31.12.2006
The same above date I want to get in out field screen header.
Thanks,
$ Lakshmi
Message was edited by:
Lakshmi

see if this link helps http://support.apple.com/kb/ht1212
you will probably have to restore the iphone as new.

How do I get dates to appear on photos?

Can anyone tell me how to get dates to appear on photos so that when you print them it shows the date in the bottom corner?

You'll need an external editor for that.
In order of price here are some suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

How can i get Date in this format - 04/Feb/2008

I need to get the date in this format - 04.Feb/2008. How can i get it using Java coding..
java.sql.date
Please reply to this..

Hi,
Are you running this code in a java file which is running on your local system???
Is this is webapp/webdynpro???
If this is a web app/webdynpro and if its deployed on the server, it should take the time of the system(server) where the app is deployed.
Regards
Ayyapparaj

How do I get 'Date

Similar Messages

Maybe you are looking for