How do I get duplex printing with MS Office on HP 1320n

Hi
I have an iMac running Snow Leopard. I have Office for Mac 2010 installed. I use an HP1320n Laser printer
If I print an email, or a pdf, the print dialog options show a tick box for me to choose two sided printing - and this works fine
But if I print from within Word or Excel, I get a different (simpler) print dialog box that does not show the duplex printing option
I have looked into the Prefernces settings in Word and Excel under the Printing section, but cannot see any option to chaneg there relating to duplex
Can anyone help please?
Thanks

Thank you sanjampet
Yes that works, and solves my problem.
Srage that you cannot get the default print dialog box when printing from Word or Excel for Mac to show the full range of printer options as default, like the standard Mac one does - Oh well Thanks Mr gates

Similar Messages

How can I get wireless printing with my ipad?

How can I get wireless printing with my ipad?

Best way is to use an AirPrint compatible printer:
http://support.apple.com/kb/HT4356
If your printer is not AirPrint compatible, you might want to take a look at Printopia.
http://www.ecamm.com/mac/printopia/

How do i get a print spooler for office jet 6500 E709n

somehow my print spooler is gone how do i get another, i have run the install, diagnostic and utility and none fix the problem. I can see the printer in my wireless network but can't print to it
This question was solved.
View Solution.

If your PRINT SPOOLER IS "GONE", you may have to contact WINDOWS for this issue. I would like to double check first though.
What operating system are you using? If windows 7 or XP, do the following:
1. Click Start Menu
2. RIGHT-click computer
3. Choose MANAGE
4. Click Services and Applications
5. Choose Services
6. Scroll down until you see PRINTER SPOOLER, if it is there, click on it, and START it
IF you DO NOT SEE IT IN THAT LIST, you will have to contact WINDOWS, because you may have to reformat your operating system, but contact them first.
Let me know if this helps, thanks.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

Windows 8 how do I get to work with HP printer

How do I get my printer to work with windows 8 Office Jet 6500 Series #{Content Removed}
Fpu # CB057-64007 Desk Top is HP All in one Serial # {Content Removed} Product # is WS323AV#ABA.
All was in July 2010.
This question was solved.
View Solution.

Hi emas. If you are referring to the link posted by banhien, it links to HP official driver site.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Can't get duplex print option for pdf files using Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP8600

I get two-sided option for normal printing, but
I can't get duplex print option for pdf files using Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP Officejet Pro 8600. HP says it's an Adobe problem. I'm stuck.
Thanks in advance.
VO

It depends where the pdf is located. If in the Finder or in an attachment to
an email in Entourage, the message is ³You can¹t open the application
³Acrobat Reader 5.0² because PowerPC applications are no longer supported².
If an attachment in an email that has come via Safari, the message is
³Safari can¹t open the file because no available applications can open it².
In each case the menu bar is Finder or Entourage or Safari as the case may
be.

How do you get a MacBook with OS X10.6.8 to print to an HP 4500 all in one wireless printer?

How do you get a MacBook with OS X (10.6.8) print to an HP 4500 all in one wireless printer?

Go to http://www8.hp.com/us/en/support-drivers.html and ensure you have the latest printer drivers loaded. Also, HP will often post the steps to enable the wireless functions when setting up the AIO functions.

How do I get in contact with apple print services support Australia when my Print Order (book) keeps being cancelled (for no known reason)

How do I get in contact with apple print services support Australia when my Print Order (book) keeps being cancelled (for no known reason)

Portables that will not Power on.
Try another power outlet.
http://support.apple.com/kb/TS1365
Go step by step.
Note: Steps 5 and 6
Best.

How can I get my ipad2 with os5 to Kodak wireless printer esp9.

How can I get my ipad2 with os5 to Kodak wireless printer esp9.

Airprint won't work with the Kodak printers because Kodak does not support Airprint. You'll need to check in the App store to see if Kodak makes a printing app for the iPad. Otherwise, there are a number of third party printing apps. People have used Printopia, Print n Share, and Print Central with good results.

How do I get my printer to work with my iPhone/ipad wirelessly

how do I get my printer epson workforce 610 wirless to work from my iphone/ipad? I downloaded the epson printer app.

Maryannebrabander,
Your comment " ... It was printing great until I did this upgrade." brought to mind a thought:
If you're ever in the SIlicon Valley area of California, specifically Mountain View, CA, I strongly recommend a visit to the Computer History Museum there. This page from the Museum website shows a Calcomp plotter advertisement from 1969:
http://www.computerhistory.org/revolution/mainframe-computers/7/161/689
My question to you is should the iPhone be able to print to the Calcomp plotter? If not, exactly how old would you have a printer (or plotter) be before you dropped support for it? If you ever do drop support, then that would occur at some discrete time - one day it would work, then something would be updated and it would no longer work.

How to duplex print with HP 200 Laserjet?

I'm having trouble duplex printing with my new Macbook Pro. Any suggestions? I have reloaded print drivers- Originally I was not able to select double sided printing but now I can, but it does not actually print double sided.

For cases where there is no hardware duplexer and the manufacturer's driver does not support manual duplexing, you could try HP's two-sided printing PDF workflow. I have not tried that for quite a while, so I can't guarantee it still works with the latest version of OS X.

How do I get my printer to match the colours of the image as I see it on screen?

How do I get my printer to match the colours of the image as I see it on screen? My HP Office Jet Pro L7680 printer tends to print my images with a bias towards red compared to the image I am seeing on screen with Lightroom 5 using a Mac with Retina 5 screen. Would appreciate any expertise on how to calibrate the printer to the screen

You have two options. The first method costs nothing but is not as accurate and the second means buying hardware and investing some time. The fastest way to get things closer is to download the color profile from the printer manufactures site for the printer and paper combination you are using. Install it on you Mac and relaunch LR. This is best when the paper and printer are both from the same company; in your case, HP. If the paper is not made by HP, you can often find profiles for your paper/printer by going to the paper maker's web site and doing a search for the appropriate profile.
The other alternative is to purchase a piece of hardware such as the ColorMonki which can be used to not only profile your monitor for color balance but also you printer/paper as well as your camera. When all of your devices agree on what color 118,118,118 means, you get the same color from capture to print but this is also an expensive option and there is a lot of time involved in building your own color profiles. The results however, are much more accurate.
Once you have a color profile installed, the next step involves doing soft proofing. Once you have your image looking the way you want it to in LR, open it in the soft proof option. This will show you how your print will look using the color profile for the paper/printer you are using. During the process, you will be shown the print on your screen which may look off. Use the small triangle in the upper-right corner of the histogram to turn on the out-of-gamut warning. This will highlight any parts of your image which contain colors your printer can't handle. Use the rendering intent options to decide how you want these colors handled (relative or perceptual). Check them both and use the one you like best. You can also make additional changes at this point if required before you generate the JPG image. Make sure to save it as a max quality JPG using the sRGP profile. Once saved, you can send this image to your printer or even to a lab as the process is the same.The attached link should get you to a video showing how to use the ColorMunki hardware/software but, more importantly, shows you how to prepare an image for printing (in this case, for a lab) using soft proofing with the color profile created (or downloaded).--Great Color from Your Lab Prints – Every Time! on Vimeo

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How do i get my printer to print black and white only

How do I get my printer to print black and white.

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How can I get the variable with the value from Thread's run method

We want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that scope of the variable gets lost resulting to null value in the called method/class..
How can I get the variable with the value?
This is sample code:
public class SampleSynchronisation
     public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run method "+sathr.x);
/* I should get:
Inside the run method
But I get only:
Inside*/
class sampleThread extends Thread
     public String x="Inside";
     public void run()
          x+="the run method";
NB: if i write the variable in to a file I am able to read it from external method. This I dont want to do

Your main thread continues to run after the sathr thread is completed, consequently the output is done before the sathr thread has modified the string. You need to make the main thread pause, this will allow sathr time to run to the point where it will modify the string and then you can print it out. Another way would be to lock the object using a synchronized block to stop the main thread accessing the string until the sathr has finished with it.

How do I get duplex printing with MS Office on HP 1320n

Similar Messages

Maybe you are looking for