How do i get dvd on my i pod vidio

can some one tell me the steps from the dvd one by one

To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
To get started: Videora iPod Convertor Guide
If you have questions: Videora iPod Convertor Frequently Asked Questions
If you have more questions, post them here: Videora iPod Convertor Forum
Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.

Similar Messages

How do I get DVD,s loaded on to my iPadmini

How do I get DVD,s loaded on to my iPadmini?

If you're talking about commercially made dvd's, then you can't, not without breaking the CSS encoding, otherwise known as copy protection. Since doing that is against the rules of this forum, none of us can help you with that.
If you're talking about home made family movies, etc, then you need to get that DVD file to mp4 format. Google and you'll find several converters you can use.

How do i get pictures on my i pod touch 1st generation?

How do i get photos on my i pod touch 1st generation?

Sync them.
iPod touch User Guide (For iOS 2.2 Software)

How can I get a .GIF as my pod touch background?

i email .GIF's to myself but when i download them on my ipod i only get a picture. how can i get the whole .GIF?

If you mean an animated background via a .gif, you can't.

HT4113 i forgot my pass code how do i get back into my i pod touch

i forgot my passcode to my ipod touch have not used it in a while how do i get into it

Connect the iPod to the computer and restore via iTunes. If necessary, place the iPod inRecovery Mode to allow the restore.

How do I get DVD for the Windows 7 that should have come with my new laptop please

This is my first message here so please bear with me. I have just bought a new Lenovo Essentials B570 laptop which has come with Windows 7 pre-installed. Previously I used to buy Dell laptops which used to come with OS Re-installation DVDs which check to see if they are being installed on the hardware it was bought for but would allow us to install the OS on a new hard disk if the original one crashed. Now Lenovo seems to be using a very complicated method to allow buyer's to re-install the OS - they are expected to retain the same hard disk - but what happens is the hard disk crashes and one wants to install the OS along with all the drivers? The Dell DVD allows me to do precisely that. Can I create a similar disk to install the OS on a new hard disk as and when I want/need it please? I have created two sets of DVDs using the OKR software - one set using the 'system presently on disk' and another set for 'resetting to factory defaults' - but from what I have read on these forums these OKR disks would not work if I put a completely new hard disk. So at least if I can get hold of the correct version of the Windows DVD - as I have paid for the license I would be very grateful. Thank you.
Solved!
Go to Solution.

yigit wrote:
http://forum.lenovo.com/t5/Lenovo-3000-and-Essential/How-to-create-quot-Factory-Default-Recovery-Dis...
Thanks for the quick reply.
But to me this looks more like a OKR solution and I have already created these Factory Reset discs.
Will these discs work if I have installed a completely new hard disk in the dive? Because that is what I would need to do in the rare event that I have a complete hard disk failure.
What is confusing is the fact that on these forums, I find many messages which indicate that the OKR solution would work only with the original hard disk and it would not work with a completely new hard disk and also that the OKR itself would not be able to change partitions on the hard disk - even when it is the original hard disk. To me this means any disks that are created using the OKR would be useless when the original hard disk has undergone severe change or a completely new hard disk is in its place. Correct me if I am wrong. (In fact I am hoping that I am wrong in that assumption.)
My laptop has a 750GB hard disk and it has Windows 7, 64bit. I actually want to make this into a dual boot machine with KUbuntu. What is stopping me attempting that is the fact that C drive has bigger partition and D drive is a smaller partition (too small in fact - 30GB these days is practically nothing) and I learn that any modifications I do to drive partitions would render the OKR non functional.
I can live without this simplistic one key rescue operation if I have recourse to the Windows 7 DVD and that is why I asked the question.

How do I get DVD files into FCP for editing?

I have three DVD's that I need to get access to for editing purposes. The DVD's open and play in DVD player with no problem, but how can I import it into FCP? The files in the DVD's folder are "BUP," "IFO," and "VOB" files -- what do I do to get them into a format I can edit?
Thank you so much!

Oh...wait..I forgot.
#7 DVD into FCP
Shane's Stock Answer #7:
To start, I will state that trying to capture any DVD you bought or rented, be it a Hollywood movie or exersize video, is illegal. I will not give you any tips on how to bypass copy protection. It is there for a reason.
To capture footage from a DVD, you have a couple options.
1) Route the DVD player to your DV camera or deck via the RCA cabling. Then you can put the footage you want ontp DV tape and have the benefit of timecode in case the need to recapture comes up.
2) You can get a great application called DVDxDV (Google it). This opens up the DVD and allows you to convert the video to DV/NTSC footage. And it allows you to only convert what you want by allowing you to mark in and out points. The free version puts a big watermark across the center of your footage, but if you pay $25 for the standard version, that goes away.
Or you can use Mac the Ripper or Mpeg Stream clip. These are free.
For this, and other exciting stock answers, click on this link:
Shane Ross, "Stock Answers", 03:58pm Jan 13, 2005 CDT

How do I get DVD Player back?

My CD player is working but DVDs (movies) are not--photos are. I think the DVD Player application is missing, following an inadvertent deletion. [The aliases are still there.] My question is, can I get the DVD Player application back? I want to upgrade my system software, and I have Tiger (which I believe is the highest my machine would comfortably go with 1.25 Ghz and 767 MB) but it seems I can't do that without the DVD Player application.
Help Appreciated!
Ruth

I have a similar problem. Just updated an iMac 700 MHz Flat Panel to 10.3.9. It has no DVD player. After the fact I took and old Super Drive I had from my old iMac Flat Panel 800 MHz machine and installed it in the iMac 700 MHz flat panel. All is well and the drive works, but no Apple DVD Player. I tried installing DVD player 3.1 and it starts but quits immediately. I tried DVD player 4.6 and it requires Tiger or up to install. I need player 4.0 apparently. I tried to use Pacifist on the 10.3.9 updater and the player is not listed as a stand alone item. I ran the updater and no DVD player appeared. I also tried to run the installer from the 10.3 disk set and there is no option to install the player seperately.
Any ideas out there? My iMac 800 MHz flat panel is running Tiger, so it has an incompatible player. I DO NOT want to update this machine to Tiger as it has a small amount of RAM (256 MB) and Tiger likes more memory.
Howard

How do I get DVD's on to my library?

I just got a brand new 30G video Ipod and i cant figure out how to put DVDs on to my library and therefore to my ipod?
Please help me!!!!!!!!

I used "DVD Decrypter" to rip my dvd's onto my computer ,i am also using windows xp. You then take the .VOB file that is created by this process and use "Videora" to convert it to .mp4 file and then just click and drag it into your itunes and then update your ipod, it has worked everytime for me. some helpful sites are:
http://www.videora.com/en-us/Converter/iPod/
http://www.afterdawn.com/software/videosoftware/dvd_rippers/dvddecrypter.cfm

How do I get DVD movies into iTunes (and thus my iPad)?

I have a pc with Windows XP. How do I import my DVD movies into iTunes? Do I need to buy additional software? Or is my best bet joining netflix?
Thanks!

you can copy them for your own use.
Copying is not the issue. Breaking the encryption is.
But it's kind of a catch 22 in that you cannot copy a DVD unless you break the encryption.
in Europe it is not
Europe is not one country.
Most European countries have their own equivalent of the DMCA and it is illegal to break the encryption in some of these countries.

How do you get DVDs to work?

Hello,
I was wondering if there was an easy way to get commrecial DVDs (e.g Star trek Film) to work on the IPOD.
When you insert teh DVD it is not recogised by Itunes.
Is there a really easy way to get it on the Ipod without paying to download?
Keith

iTunes does not recognize DVDs. It's not one of its functions.
In order to copy a commercial DVD, you'd need to break the encryption. Breaking that encryption is illegal in the U.S. (and other countries). Because it's illegal and these forums are being hosted in the U.S. by a U.S. based company, the Terms of Use prohibit discussion of copying commercial DVDs.
Best of luck.

How do you get dvds to work on regular dvd players? It works on PC dvd player just fine.

I created a movie via Elements 13 (Using Windows 7) using video from my camcorder. I added menus and such and then burned it to a DVD -R using Elements 13. The dvd will play on a computer via the dvd player but it won't play
on a regular dvd player that is hooked to my TV. What am I missing?

gibbyutah
What did you create in Premiere Elements 13 on Windows 7 (assumed 64 bit) - DVD-VIDEO on DVD disc or AVCHD format on DVD disc.
Although you can use a regular DVD burner to create the AVCHD format on DVD disc, it will not play back on a regular DVD player. You need
a Blu-ray player or one of those multi media players whose specifications include support for AVCHD format on DVD disc.
So, first order of things is for you to confirm which type of product you produced using Premiere Elements 13.
Also, be aware that stop markers in Premiere Elements (any version) burn to AVCHD on DVD or Blu-ray disc format on Blu-ray disc do not
function at playback. Those stop markers work only for DVD-VIDEO on DVD disc.
Please let us know if any of the above targeted your issue. If not, more details please, and we will think about this some more.
Also, please review the specification of your TV's DVD player to verify its specifications as to type of disc supported as well as the format on
that particular disc.
Thank you.
ATR

How do i get dvd films into i movie

?

My goodness what a lot of work for nothing in this 6 point list.
Here is a lot easier way:
1. Rip with MTR
2. Open the VOB files in MPEG Streamclip (after installing the QT MPEG-2 component which you have to buy but MPEG Streamclip is free)
3. Export from the file menu as DV.(You can set in and out points in MPEG Streamclip and thus export only a selection which is probably typical)
4. Use the DV file in iMovie (which ONLY uses DV files).
C'mon Mr. MDN2005: You have to rip, demux, convert video then audio, extract in and out points, import video and sound separately and use 5 programs instead of two? Sure it works (maybe) but why bother? And this is beyond the ability of 99% of users with this question.
I would not convert already bad enough MPEG-2 to 3ivX to use in iMovie (which then has to convert the clips into DV and takes a long time anwyay)- two lossy codecs vs. one, really?

How do I get music onto my i pod nano 7th gen

I am going out of my mind. I purchased over 200 songs via itunes and can not get them on to my i pod nano 7th gen no matter what ai try--- All my music is also srored in my i cloud--- Does any one know how to move it from the i cloud to the 7th gen i pod nano?
Help Help Help --- I am ready to throw this thing in the river, as I can't get any of the music I have paid for on it.   All my music automatically downloads to my i phone S via Wi-Fi, I don't have to plug in to itunes or synch-- the music just "appears"----magic???
As the sound quality on the iphone is no where near as good as on the Nano ( which is meant to ONLY BE A MUSIC PLAYER)----I really want to listen to it on my new Nano----What the **** is wrong with Apple that they enjoy torturing us with ever new product upgrade release that they don' t tell anyone how to use!
***!--Apple   you SUCK at customer service and support, which is why all these user groups have cropped up trying to help each other. as Apple is not interest ed in customer service, only in selling us things they don't, can't or just plain won't tell us how to operate!!!
Why is it impossible to put music on an Nano 7th generation.   Does any one know of a phone number for a real Apple human that may deign to help me?
Please !!!!!
Apple, we buy your stuff- why can't you tell us how to use it?
I am desperate-- have been trying to do this for weeks with no results!!

Have you read this?
http://support.apple.com/kb/HT1351

I only have a iPad (no pc) how do I get music from ipad to pod?

As I have a classic iPod and no mac just a ipad2 how do it transfer music I have downloaded to the classic? I tried syncing between the iPad and iPod classic with a connection lead but did not work. Any ideas?

It can't be done. You can only load data onto an iPod classic from a computer running iTunes or third party software with iPod support.
tt2

How do i get dvd on my i pod vidio

Similar Messages

Maybe you are looking for