How do i get Edge to work on my iphone 4 on tmobile?

how do i get Edge to work on my iphone 4 on tmobile? I have been using edge for about a month or so and today it just stopped working. I havent updated my phone or anything. I did follow all the APN directions given to me but that did not work either.

T-Mobile in the U.S.?
If so, with an iPhone purchased as officially unlocked in another country, or with an iPhone purchased in the U.S. that has been hacked to be unlocked?

Similar Messages

How do I get tunes to work on my iphone 4 after downloading ios 7

How do I get the itunes to work again? If hasn't worked since IOS7 was installed. I have tried downgrading to the old IOS and that didn't work and I tried going back to factory settings and that didnt work.

Close iTunes and open it. The notification will appear and if you don't have go like to download iTunes and it will do like an upload

How do I get my wifi working on my iPhone 4S and I upgrade to IOS6

How can I get my wifi back to working on my iPhone 4S because I won't to download apps

Turn it on and connect to a Wi-Fi hotspot.
If there is a specific issue, you'll need to be specific about what is or is not occurring.

How do I get outbound email working on my iPhone 4S with iOS7.0.2?

Since installing iOS7 on my iPhone 4S I can no longer send email. I can receive email no problem, and I have checked my passwords several times. Is there a fix that will allow me to send email again?

Hello Boardman99,
It sounds like after a recent update you are no longer able to send mail, but receiving it works without issue.
I would start with the troubleshooting outlined in this article named:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Try these basic troubleshooting steps first
Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage, follow these troubleshooting steps.Try to use an alternate Internet connection if available:
Try a different Wi-Fi connection
If your iOS device has an active cellular data plan, tap Settings > Wi-Fi and turn off Wi-Fi.
If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Thank you for using Apple Support Communities.
All the very best,
Sterling

How do I get iCloud to work on my iphone

I cannot seem to set up iCloud on my iphone. Apple updated my phone yesterday to 6. I have lost my calendar and text messages only and have no way of retrieving it as itunes had a technical problem happening, while I was doing my back up. Apple support refuse to help. Very nice people (not)!. Can anybody help me with iCloud at least please?

I went to www.icloud.com and registered with my apple ID. That was it. There was no option to create a icloud account. I'm from Australia...could that be an issue?
On my iphone..I can only go to settings..iCloud..asks for Apple ID and password...verifying...then error appears... verification failed, timed out.
Because my iphone was updated 2 days ago...I'm still learning my way around it. Where are my accounts list?

How do i get my bluetooth working on my iphone4s

How do i get my bluetooth working on my iphone 4s?

Apple really doesn't care what you think. They have an extremely low opinion of users. The real issue is Apple has continuously dumbed down their devices to match their clientele - and at that they are brilliantly successful.
They even handed over most of their support to a bunch of unpaid non-apple people. Even more brilliant.
x

Cannot get iCloud to work on upgraded iPhone

This week I upgraded my iPad (iPad 2), & iPhone (iPhone 4) to IOS7.
I did the iPad2 first. There were no problems with the upgrade to IOS7. After upgrading, I logged into iCloud on my iPad using the correct ID and gave correct password. There were no problems. I was able to wanted to turn on "Find my iPad" without any problem.
I upgraded the iPhone4 next. There were no problems with the upgrade to IOS7. After upgrading, I logged into iCloud, again using the correct ID and correct password. I immediately received this error message:
"Photo Stream - Photos for the iCloud account "iCloud" cannot be accessed. Review your account information in Settings".
You are given the choice of "Ignore" and "Settings". I pressed the "Settings" button and arrived at the main settings screen, with no other information. However, the iCloud setting is greyed out (disabled). I cannot access any iCloud settings. Likewise, in the "Photos & Camera" setting, the icons for "My Photo Stream" and "Photo Sharing" are greyed out (disabled).
Nothing I do will allow me to access iCloud settings.
I tried turning off the iPhone (resetting it). Once I turn it on again, I go to settings/iCloud. Tapping this brings up the iCloud login. I enter the correct password (for the correct ID), and immediately get the above "Photo Stream..." error.
I have tried this 4 times now. I can say with some confidence that resetting the phone does NOT fix the problem.
SO - what is going on, and how can I get iCloud to work on my iPhone?
Thanks.
p.s. The iPad's iCloud is working just fine.

If your iCloud setting is greyed out, go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes.

I cannot get the edge dection tool to work i use to use it all the time but now i can't, how do i get it to work?

I use to use the edge detection tool all the time but now I can't, how do I get it to work again. When I try to use it, it will show the o with the line in side.

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How do you get edge working in 1.1.3?

i jailbroke and can't get edge to work..and yes, i did try General> About> and Reset Network Settings..or something like that.
thanks for everyone's help!

Apple767 wrote:
i jailbroke and can't get edge to work..and yes, i did try General> About> and Reset Network Settings..or something like that.
thanks for everyone's help!
Well, since it is against Apple's TOS, you wont find any help here for a jailbroken phone.

I have 2 ipod touch's that both have frozen screens and will not reset or show up in itunes. They both froze after trying to update to the latest software version. How do I get them to work?

I have 2 touch's that froze when trying to update to the latest ios version. Neither respond to restarting the devices. They are also not recognized in windows or itunes. How do I get these to work. I followed all of the instructions on the apple website and they still don't work. I have verified that I have apple support for mobile devices installed in itunes and my version of itunes is 11.0.1. I am running windows 7 64bit with service pack 1 installed and all of my updates are current. Is anybody else having this problem with their apple devices?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

How do I get fios to work with my new desktop w/ Windows Media Center

Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

Based on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Kichat: How do I get iChat 3 working ? Upgrade hints, FAQ

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
How do I get iChat 3 working ? Upgrade hints:FAQ
Trouble Shooting Revisited
Ok We will start with loading Tiger and iChat version 3.0
From Panther
There are or were serveral Add-ons and applications avaiblable to Panther users of iChat that are not compatible with iChat 3.
These following need to be deleted.
iCAR - An Add-on that posts an Auto response Away message (produces a 1 fps result in a Video chat)
Virex for Panther - An Anti Virus app avialable to @mac account users (Produces the 1 fsp problem)
iChatUSBCam for Panther/iChat2.x - A Add-on utility for using iSight or USB cam with iChat2.x (Incompatible with Tiger/iChat 3)
iProfile - An Add-on for producing a profile on the AIM server that ichat 2.x could not do (not proven to be a problem but now not needed).
A clean install of Tiger (not Archive and Install) produces the best results.
But any install should also check these Tiger settings.
First, UPGRADE to 10.4.3 as this gets past many Connection issues that became apparent with the basic Tiger (10.4) and iChat 3.0 It updates iChat to version 3.1
Check Settings
Don't be complacent that you have not set anything different.
There are several new things in Tiger that may trip you up.
These are worth looking at:
Mac Firewall. Now includes the ability to Block all UDP traffic in the Advanced button (System Preferences > Sharing >Firewall tab then the Advanced Button).
Also can now open UDP protocol for ports where as the Panther one only did TCP (Check any old Panther settings you Added to the presets).
The ports should be:
TCP -5190
UDP -5060, 5190, 5678, 16384-16403
There are more ports for Bonjour 5297, 5298, 5353 UDP and 5298 TCP and Jabber, 5220, 5222, 5223 on TCP)
(Table View see 7th Sept)
QuickTime. This has a change in the name of the Connection Speed tab to Streaming (System Preferences > QuickTime) Check this is set to be equal to your connection speed (the download one if this is faster). See Apple Doc 301641 Dated 9th November 2005.
Date & Time. Not conclusively involved but worth eliminating. Set a Network Server and the correct Time Zone.
Apple Remote Desktop. If this is active in System Preferences > Sharing > Services tab it causes problems for iChat.
Next, test the actual speed you are getting from your ISP.
http://www.dslreports.com/stest
There is a table here of the speeds you need:
http://docs.info.apple.com/article.html?artnum=301050
The one you get linked to in the Help menu is wrong.
Other Known Problems
There are several other applications that iChat 3 does not seem to like.
folding@home This is a application that uses spare processor time to help find protein chains for a University.
PostgreSQL This is a data base application that can be reset to allow more processor time for iChat. See here http://www.murraywilliams.com/blog/archives/000046.html
Lotus Notes Some people have reported problems with this.
Make sure any Add-on Video cards or input PCI cards have up to date Firmware
IF you are still having problems I would do Routine Maintenance Tasks as laid out here.
Lastly, some routers/modems are SIP aware and give different results in iChat 3 compared to iChat 2.
This is due to the Operating System changing (like a new computer connecting to the modem) rather than iChat.
See My web pages: page4 at the SIP Text in a Box section.
Also for the above try some housekeeping particularly if you do not keep your Computer on 24/7 Gulliver, "kmosx3: Mac OS X 10.3/10.4: System maintenance"
Ralph
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

i think apple needs to keep up with the jones here, so far i read at LOGIC PRO FORUMS many saying cubase and pro tools left logic in the dust, 1 year ago already, sad, but true
in anycase, trye starting one app before the other to see which combination works., other wise i think more apps will fall out of sync with old logic pro

HT3887 my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Kisight: How do I get my iSight working ? Trouble Shooting an iSight Camera. (Version 3)

Replacement for the second draft of this Thread   (To be removed if Published as Tip)
kisight: How do I get my iSight working ?
Trouble Shooting an iSight Camera. (Version 3)
Hi,     On many subjects Apple has Articles and Documents that can help.
In some case they are written by an Engineer or similar and can miss the mark for the average user.
In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
It lists steps and processes to go through for both Internal iSights and External ones.
However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ? which were written several years ago and predate the Apple Article, being aimed at the External iSight. They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
External First. For Internal iSights Start at 2b) (you will need to adjust some options/steps as the Internal is USB)
Steps
1) Pre Purchase
If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
2) Does it work ?
a) First of all Plug it in. It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
It will then go through some checks as the OS powers it up and checks it's firmware.
Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
There is no ON switch as such. It does have an iris mechanism that can be controlled by the User. The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
See this Users Tip for more applications Or this page for yet more.
Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
3) If it does Not Work
a) Check Cables/leads. Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
Try another 6 pin to 6 pin firewire cable.
b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing. (Also see d below if you have an 800 FIreWIre Computer)
c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire. (Use USB for Internal Cameras)
If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point. This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
Other Items
Audio.
The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
Firmware.
The System Profiler as detailed above should tell you the Firmware the iSight has. The current version is 1.0.3 and was updated in Panther. (Essentially it is an Audio compatibility update but does seem to help in other situations)
If your computer is running Panther (10.2.x) then use this Updater
If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
If an iSight is Plugged in on the Computer when you do an OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
Focusing on the External iSight
Essentially the External iSight is self or Autofocusing.
If in doubt then try better lighting and strong colours as opposes to light or pastels.
(All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
EZ Jim has these more specific recommendations for piece of mind.
Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
This Users Tip by Ian Bickerstaff can give you clues for any application really "Look and sound good in iChat"
Other Info and Links
iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
Apple's iSight Firewire Connectivity FAQs
Apple's iSight Service FAQs
If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
1:13 PM      Saturday; October 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Replacement for the second draft of this Thread   (To be removed if Published as Tip)
kisight: How do I get my iSight working ?
Trouble Shooting an iSight Camera. (Version 3)
Hi,     On many subjects Apple has Articles and Documents that can help.
In some case they are written by an Engineer or similar and can miss the mark for the average user.
In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
It lists steps and processes to go through for both Internal iSights and External ones.
However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ? which were written several years ago and predate the Apple Article, being aimed at the External iSight. They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
External First. For Internal iSights Start at 2b) (you will need to adjust some options/steps as the Internal is USB)
Steps
1) Pre Purchase
If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
2) Does it work ?
a) First of all Plug it in. It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
It will then go through some checks as the OS powers it up and checks it's firmware.
Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
There is no ON switch as such. It does have an iris mechanism that can be controlled by the User. The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
See this Users Tip for more applications Or this page for yet more.
Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
3) If it does Not Work
a) Check Cables/leads. Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
Try another 6 pin to 6 pin firewire cable.
b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing. (Also see d below if you have an 800 FIreWIre Computer)
c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire. (Use USB for Internal Cameras)
If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point. This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
Other Items
Audio.
The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
Firmware.
The System Profiler as detailed above should tell you the Firmware the iSight has. The current version is 1.0.3 and was updated in Panther. (Essentially it is an Audio compatibility update but does seem to help in other situations)
If your computer is running Panther (10.2.x) then use this Updater
If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
If an iSight is Plugged in on the Computer when you do an OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
Focusing on the External iSight
Essentially the External iSight is self or Autofocusing.
If in doubt then try better lighting and strong colours as opposes to light or pastels.
(All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
EZ Jim has these more specific recommendations for piece of mind.
Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
This Users Tip by Ian Bickerstaff can give you clues for any application really "Look and sound good in iChat"
Other Info and Links
iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
Apple's iSight Firewire Connectivity FAQs
Apple's iSight Service FAQs
If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
1:13 PM      Saturday; October 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How do i get Edge to work on my iphone 4 on tmobile?

Similar Messages

Maybe you are looking for