How do i get final cut pro x to recognize my time capsule in event library
how do i get final cut pro x to recognize my time capsule in event library?
Yeah I'm getting the same issue. I purchased a new Mac Mini yesterday purely to use the new FCPX, and now on day 1 I'm already running into problems... please don't make me switch to Premiere.
Set up the computer with external yesterday, never set anything to Time Machine. Here's a screenshot of the drive, formatted on Mac OS Extended (Journaled):
And here's a screenshot of FCPX not recognizing the drive:
Apple please respond to this post, would really appreciate some help here troubleshooting.
Similar Messages
-
TS2521 How can I get Final Cut Pro 7?
I would like to get Final Cut Pro 7. Is this possible? If so, does the Studio version have motion, etc.?
Motion and Compressor are separate.
And know, that FCP-X is unlike FCP 7 in just about every way possible. The way it works is vastly different. And you cannot open FCP 7 or 6 projects in it without buying a 3rd party converter.
Now, I hear many people like it...I just wanted you to know that it is VERY different from FCP 7 -
How can I get Final Cut ProX to recognize my Canon Vixia HV30 camera?
Does your Mac have a FW 800 port? If it does, use a 4 pin to 9 pin connection. If you have only Thunderbolt, use a FW>Tb adaptor. Either way, your Mac should see the camera. If it does, so will FCP.
Russ -
I just bought an IMAC running OSX 10.6.8 (not sure what flavor that is). The processor is 2Ghz Intel Core 2 Duo (Late 2006). When i run Final Cut Pro 4 on it I get the following error.
"Configuration error
This software requires certain hardware or software which is missing
* AGP graphics Card"
If Final Cut Pro 4 doesn't run on my system, what version of Final Cut can I run on this as I am a filmmaker and really am comfortable with Final Cut Pro.
On the same note I also have DVD studio Pro 2 and that just quits without any message.
Hope any of you can be some help.
Thank you,
DougThis is my first mac in a long time so i'm not sure about what this mac is as i didn't buy this from apple (ala Amazon). I'm a tad confused about the Intel/PowerPC thing. I do know the software version for sure, but the Intel/PowerPC is very confusing. I just need to find someone who would know about this question. It doesn't say G5 on this computer. Thats my biggest confusion. Help Me...
-
How did i get final cut pro 5.0 to work on mac book pro
anyone know why its working fine?? i just put the disk and it seems to work beautiful...
There is nor reason for it to not work, most PowerPC applications will work on the new Intel based systems. The 5.1 update for Final Cut Pro is meant to run a lot faster thats about it (other than possibly some bug fixes).
-
How do I get FInal Cut Pro to save the render files?
Final cut used to work really great, but lately it has stopped saving any render files, so ever time I try to edit something new it starts re-rendering all of my other files and slows it down to the point of crashing a lot. Is ther any way to fix this or get it to NOT render things that I am currently not editing?
Can you see the render files in your project folders? FCP X does not stop rendering by its own choice, check your preferences, as Tom suggested, and restart FCPX to see your settings taking effect.
-
Does anyone know how to get final cut pro x to stop lagging?
Does anyone know how to get final cut pro x to stop lagging?
Two things: 1) MORE RAM.
2) What hard drive?
I am sorry if this sounds harsh, but the bare minimum to get decent performance out of FCP X is 8GB.
If you mac supports more, even better - go to 12GB or 16GB.
Also, the hard drive? Are you editing on the internal drive? That is also a bottleneck. The system drive should not also be used as a media drive; plus, depending on model, it may not be very fast drive to begin with.
You should use an external drive with a fast enough connection - USB3 or Thunderbolt, if possible; FW800 as a distant third. USB2 may also work, albeit it is a relatively slow connection.
Message was edited by: Luis Sequeira1 -
How to export from Final Cut Pro after downloading Maverick
Final Cut Pro no longer exports after installing Maverick. I get this: The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.) - have paid for Compressor and instaled it - but it makes no difference.
But how do I update Final Cut Pro 10.0.3? Apple says all my updates for everything are fine. It worked well before I installed Maverick, and now I can't get any of my short films out of it! They won't copy over to IMovie so I have to start again and basically scrap Final Cut Pro - which seems a bit unfair just for updating to Maverick. Makes the free download a bit pricey in the long term.
-
How do I stop Final Cut Pro 10.1 from introducing artifacts?
How do I stop Final Cut Pro 10.1 from introducing artifacts?
Can someone please tell me what do do differently so that my edited video does not develop artifacts that were not in the original camera file. My Sony HDR CX900 produces crazy detailed XAVC S video that FCPX seems to import with no problem but FCPX is introducing artifacts: some on import and more on share. The artifact in the examples below appears above and below the horizontal rope line on this model boat. Please look closely. It doesn't look to bad here, but it dances on my screen. Also, the video generally degrades much more than I would have hoped. How can I get more professional results? Sorry for the long post, but more information now might save time and questions.
Below is a portion of a frame opened in quicktime directly from camera's card.
Below is the associated Inspector for above frame
Here is the same after it is imported into FCPX. Optimized and Proxy Media were created, but FCPX seems to select what to play so I can't tell you which one is shown here.
Here is the associated Inspector capture from FCPX.
Here is the same frame once again after it is Shared as ProRes 422. Note the horizontal lines above and below the rope lines on this model yacht.
Here is Inspector for the above file.
Here is the same once again after it is Shared as H.264 Better Quality.
I tried converting to Proress with 5Dto RGB and Brorsoft Video Converter. They both went though the process, but introduced similar artifacts.
How can I get more professional results?
And here is the associated Inspector for the above video.
I tried converting to Proress with 5Dto RGB and Brorsoft Video Converter. They both went though the process, but introduced similar artifacts.
How can I get more professional results?Russ H.
When I right click on the clip in the browser and select Transcode Media, the dialog box opens, Optimize Media is checked, but OK is greyed out. Transcode is not an option. I think this points to the fact that FCPX is doesn't need to transcode XAVC-S or FCPX can't transcode XAVC-S. This is a new Sony codec produced by the new HDR CX900. The codec is HD at 50Mbps.
Tom Wolsky,
I selected Optimized Media in the viewer and both the timeline and exports (422 and H.264) look great.
The 24 second long exported video jumps a couple of times as if skipping a frame, as it plays. Could this be related to 29.97 instead of 30fps?
Thank you so much for getting the image right. Now if I can just eliminate those couple of small jumps. -
How to upgrade my Final Cut Pro 6 to X
How to upgrade my Final Cut Pro 6 to X?
There is no upgrade to FCPX, you have to buy it for $299.99. Yes, Russ is right, FCPX is very different than previous versions, I realized that I would have to start from scratch with it. Look up free tutorials online, there are a few good ones. If you try and just jump in, you'll get very frustrated very fast. Take the time to learn it before you try any important projects. Read my post:
https://discussions.apple.com/message/23411640#23411640 -
How Can I transfer Final Cut Pro X to another computer
How can I transfer Final Cut Pro X to another computer without connecting the two
As Kappy said, download it from the App Store - this will give you a brand new copy. However unlikely, it's just possible you might be copying a corrupt version from the original computer.
In the App Store, make certain you use the same Apple ID that the App was purchased with.
Andy -
How do you import final cut pro projects into imovie? (like you create a pr
How do you import final cut pro projects into imovie?
(like you create a project in final cut but i want to save it, and import it into imovie..Hi -
Mr. Ross is right, there is no direct way to export your project with all it's elements into iMovie.
If, on the other hand, you have a completed sequence in FCP that you want to export as a finished element, then import into iMovie for you to re-edit or apply titles, music, etc. you would:
In FCP:
Click on the Sequence Icon you want to export in your browser.
Go to the menu File > Export > Quicktime Movie. Give your movie a name a navigate to where you want it stored. Make sure you choose Settings: Current Settings and have the Make Movie Self Contained checked. Click Save.
Close FCP and open iMovie.
In iMovie:
Go to the menu File > Import > Movies and navigate to the movie you just exported from FCP. Choose if you want your movie imported in it's original size, etc.
Click Import. Your movie will be imported into iMovie.
Note that using this method only gives you only the elements that made up your FCP sequence, so this may not give you the flexibility you need.
Hope this helps.
MtD -
how can I reinstall Final Cut Pro 10.0.6, this action may correct my issues
Thanks, I have found this on the "APPLE" support site; Final Cut Pro X: How to remove and reinstall Final Cut Pro X on; http://support.apple.com/kb/HT5149, which after reading through increased my trepidation ! Your directions are frightingly concise but Just what I needed..
-
How can i buy final cut pro with my account p.s its no u.s id?
how can i buy final cut pro with my account p.s its no u.s id?
You are wanting to change your account to US to buy FCPX? Do you have a credit card at least?
-
Should I get Final Cut Pro?
Hi, I am on YouTube and I almost have 1,000 subscribers. I am going to get a MacBook Pro in the future and I want to know if I should get Final Cut Pro. Is it worth the price or is iMovie good enough? Please help me!
Only you can answer that.
If iMovie does what you need, then stick with it.
If you really want to see what FCP X is like you can download a fully functioning trial version for 30 days completely free of charge and any obligation from
http://www.apple.com/finalcutpro/trial/
Maybe you are looking for
-
My ipod touch is all of a sudden not letting me do anything that requires using my password. I can't buy anything and I can't check my purchases. Every time I put in my password I get an error message and it says try again later. This has been happen
-
Printing Barcode for a 18 digit SSCC No (Handling Unit Number) thru' VL02N
Hi, I'm trying to print a Barcode for a corresponding Handling Unit number in VL02N transaction code. I have created a new device type by name ZBARCODE in SPAD transaction, the Device Type name is: ZLB_ZEB and Spool Server is: fihdev02_FDV_00 In SE
-
Where are contacts saved?
Hi there, This started off as a loss of all contacts from the address book, which has now turned into a curiosity of where exactly do the contacts get saved? I have removed the folder ~/Library/Applications Support/Address Book/ I have actually delet
-
Is there a way to convert a pdf scanned document into a word document?
-
AVCHD files - can't hear audio
Hey guys, I'm shooting a conference with a friend's Panasonic HMC150 camera. Although I've shot with the camera before, I've never really taken a deeper look at the file structure...as compared to Panasonic's P2 system. I'm not editing the footage