How do I get Firefox to recognize my new default printer as the old default printer is no longer connected?

I have installed a new default printer in my computer which is running Windows XP Pro. When I try to print from the browser it keeps showing the old printer which is no longer connected to the computer. Every other program has recognized the new default printer. The Control Panel indicates that the new printer is the default.

You can force Firefox into forgetting the old printer.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''print.print_printer''', right-click on it and choose '''Reset'''
# Restart Firefox

Similar Messages

  • How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old info

    How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old phone. The new phone is my husbands and I don't want to back up my phone info on it. I re connected it hoping it would prompt me with the option again and it doesn't , it just shows up as a back up to my phone. How can I get it to give me that option in the beginning again

    First of all, I think the first time you sync an iPod that's formatted for Windows on a Mac, the sync process reformats it for Mac. You can check what it is now by looking for the iPod with Disk Utility. If it's Mac OS Extended, it's formatted for Mac already.
    Also, there is no current iPod updater app these days. iTunes handles it through the Restore button. If you are not able to use the latest iTunes because of your Mac, I can understand. The latest version of iTunes should run with 10.3.9 or later, if the hardware can handle it.
    You said the battery was low so let it recharge for a while.
    You should also reset the iPod. It's part of the 5Rs, which you should go through as the starting point for iPod trouble-shooting.
    http://www.apple.com/support/ipod/five_rs/wheel/

  • When i download a file from the web i get "Anti-Virus Program not found " message. This has been happening since I change anti-virus programs for CA etrust to Sophos. How do I get Firefox to recognise my new Anti-virus program?

    every time i download a file from the web (ie. a PDF file) i get "Anti-Virus Program not found " message. This has been happening since I changed anti-virus programs for CA etrust to Sophos. How do I get Firefox to recognise my new Anti-virus program?

    That is a very good warning provided by the Download Statusbar extension. Something like that should been built into Firefox. I filed this Bug report a couple of years ago, about the lack of a warning like that. <br />
    https://bugzilla.mozilla.org/show_bug.cgi?id=480855 <br />
    I have looked everywhere that I can think of to find a list of '''IOfficeAntiVirus providers''' ''(as mentioned in the Bug report)'' that will work with Firefox, so I can't answer that for you.
    You might want to ask the developer of the Download Statusbar extension about it. He might know which AV programs are compatible with the Windows API that Firefox uses for the download scan. <br />
    http://dlstatusbar.proboards.com/index.cgi? <br />

  • How do I get iTunes to recognize my device?  Since installing iOS 8.1.2 it no longer recognizes my iPad.

    How do I get iTunes to recognize my device?  Since installing iOS 8.1.2 it no longer recognizes my iPad.

    Hi, snewc.  
    Thank you for visiting Apple Support Communities.  
    Here are some troubleshooting steps that I would recommend going through when a device is not recognized in iTunes.  
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • How do I get Skype to recognize my new mobile phon...

    my original primary mobile phone recognized by skype is lost, how do i get skype to recognize my new mobile phone to enable me make calls to family and friends?
    This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    You need iTunes 10.7 or later on the computer.
    If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar.

  • HT1311 i tried to do a backup from my old iphone as i have a new one that was signed into another itunes account. it said i cant do it because the iphone rejected the request. how do i get around this? i have signed out of the old acct and into mine on th

    i tried to do a backup from my old iphone as i have a new one that was signed into another itunes account. it said i cant do it because the iphone rejected the request. how do i get around this? i have signed out of the old acct and into mine on the phone

    What is the precise wording of the error message that occurs on the old iPhone when attempting to do a backup?
    Are you attempting to backup via iTunes on the computer or iCloud?

  • I had Premier pro given me by the college I attend and do no use wi fi and do not use cloud. My laptop completely died and will be sent back to Apple for exchange. How can I reinstall Premier Pro on a new Apple computer since the old one is completly dead

    I had Premier pro given me by the college I attend and do no use wi fi and do not use cloud. My laptop completely died and will be sent back to Apple for exchange. How can I reinstall Premier Pro on a new Apple computer since the old one is completly dead and could not be unregistered?

    Hi,
    You have not specified which version of Premiere Pro was given to you. If you don't have the disc (which i suppose you don't have) you will have to download it online.
    As far as your registration is concerned, for Premiere Pro CS6 or earlier you will have to reach Adobe chat support for further help: http://helpx.adobe.com/contact.html
    For Premiere Pro CC and later, you will not have much problems reactivating it.
    Thanks,
    Rameez

  • How can I get Firefox to recognize ODM file extensions? Help! bmathias@usf.edu

    Windows7, Firefox version? (not sure what version! it doesn't come up under Properties!) but my computer was just upgraded to Windows7 last week & Firefox reinstalled, so probably the latest version. OverDrive (ODM file extensions) is a DRM software system used by public libraries to limit checkout/access of streamed audio & e-books. But the audiobooks won't download. The troubleshooting directions say that I shoule be able to find the ODM file extension under Tools -- Options -- Applications in Firefox. But it isn't listing. Perhaps this is why the download doesn't work? How do I get Firefox to work with ODM file extension?

    Check the URL that doesn't work.
    ''If it is an http:// URL:''
    When a web server sends Firefox a file, it includes a content-type header. This is what Firefox uses to determine how to handle the file, not the file extension. The server might be sending a generic download type such as "application/octet-stream" which you cannot assign to any one application. That's just a guess because I don't use that software.
    ''If it is an st:// URL:''
    Firefox will check the Windows registry for novel protocols. This article has more information: http://kb.mozillazine.org/Register_protocol

  • How do I get firefox to open a new window when i click on a link in a webpage ?

    When I click on a link in a webpage in Firefox, generally it opens the new page in the window i am in (though some times it does not). How do I get it to open a new window (or tab) each time I click a link.
    For example, on www.bbc.co.uk if I click on a link, the new page opens in the same window, if I then click another link in the new window, again, it opens in the same window. To get back to the original window, I have to use the back button twice. Surely there is a setting so that all 3 windows can be open on separate tabs or separate windows.
    I have been to the tabs window in options, but doesn't seem to make a difference.

    Open link/bookmark in new tab in same window:
    *Middle-click (press the mouse scroll wheel) the link
    *Ctrl+left click the link
    *right-click the link, choose "Open Link in New Tab"
    Open link/bookmark in new window:
    * Shift+Enter on the link
    * Shift+left click on the link
    See: http://www.7is7.com/software/firefox/shortcuts.html

  • How can I get Firefox to "grab onto" and then "hold onto" the data signal until I tell Firefox to release it at the end of my session of internet browsing?

    ok, I hope that my description of this problem does not come out in such a disorganized fashion that it makes the description difficult to follow. here goes: every 30 seconds to 1 minute (or thereabouts, I'm estimating) my mobile phone's browser (whether Firefox or any other) loses the data signal, so that tje next time that. I click on something, I get an error message that the "data connection timed out, retry" or "network unavailable" or "check that you are connected to that internet", etc. etc. etc. I have downloaded many apps that are supposed to boost data connectivity and/or improve internet speed, blah, blah, blah, till I discovered that was a problem with the server being able to keep up with staying locked onto my browser. in one of these apps diagnostic screens, I found a notation that therr was something wrong with my cell's relative position. well, how could that be, I wondered, since I had "GPS tracking" "GPS reporting" and "location sharing" all enabled? but, then I noticed, on the image of my cell's location as represented by this particular app, that every half minute, or so, the blue dot which represented my cell's location would slip to the left about one quarter of an inch, or so, and in the longitude and latitude part of this app's diagnostic screen I saw that the numerical designations of my cell's longitude and latitude were zero and zero. it suddenly occurred to me that the server had lost sight of my cell because my cell had moved too far out of the range of that server's sight due to the rotation of the earth. well, blow me down, what am I supposed to do to fix that? how can I tell my cell phone's OS to send out some kind of identifying info on a constant basis, so that the server could keep track of it (and I would not lose the signal)? or, conversely, how could I get my cell phone's browser to grab onto the signal and not let go of it until I was done with that internet session, at which time I would then manually release the signal myself? I hope that my explanation of the problem made enough sense that you could follow it and that you can come up with a workable solution for me. oh yeah, my phone is an LG OPTIMUS ELITE 696. thanx, from the enragedkangaroo.

    Hello,
    I'm afraid I don't think there is going to be much we can do to help you here. The description sounds like an issue with the phone rather than with Firefox specifically.
    I don't think the problem can be caused by you moving out of range of the cell, due to the rotation of the earth. The cell towers (that provide phone signal) are sitting on the earth, just like you, and so move at the same speed as you. This might be a concern with satellite phones using Low Earth Obit satellites but this isn't the case here.
    I think the best thing to do would be to get in touch with your Phone Operator or Device Manufacturer for support. If you are out of the support period or can't get support from them for some other reason then a standard 'cure-all' for mobile phones is to do a Factory Reset. This will return your phone to its default factory settings and wipe all of your data / modifications off the phone. This tends to solve most problems and is probably what the official support team would tell you to do. I can't guarantee that it will help but it has a good chance.
    There are instructions on resetting your phone here:
    http://www.hard-reset.com/lg-optimus-elite-hard-reset.html
    I hope that helps.

  • How do I get Itunes to recognize my new Ipod 5?

    How do I get Itunes to recognize my Ipod 5?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    You need iTunes 10.7 or later on the computer.
    If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar.

  • How do I get iTunes to recognize my iPod while plugged into the TC?

    Ok So I have an Apple Time Capsule which I use as my router and NAS drive. Though I also plug my iPod into the usb port on it. The iPod is recognized on my computer and over the network easily although how can I get iTunes to recognize it and be able to add music and video?

    Double-Dee91 wrote:
    I have an Apple Time Capsule which I use as my router and NAS drive. Though I also plug my iPod into the usb port on it.
    Even though it's physically possible, I doubt an iPod is intended to work that way. Why do you want to do that?
    The iPod is recognized on my computer and over the network easily although how can I get iTunes to recognize it and be able to add music and video?
    What I believe you're seeing is the disk drive function of your iPod, which is different from the music player function. I'd give up trying to play music from your iPod while connected to a Time Capsule.

  • How do I get itunes to recognize my new ipod shuffle?

    How do I get itunes on my mac pro to recognize my new ipod shuffle?

    The latest iTunes may hide the sidebar (along left side of window).  To show the sidebar, from the menu bar, under View, select Show Sidebar.  With sidebar visible, when the shuffle is connected, it should appear in the sidebar under DEVICES.  Does it appear there?

  • How can I get iMac to recognize Canon Pixma mp990 printer wirelessly?

    Although my Canon Pixma MP990 printer/scanner shows I've properly set it up for wifi, and the blue wifi light illuminates on the printer, my iMac now refuses to recognize that my printer is connected. Imac now shows the printer as offline.  When the printer was set up for corded/wired connection, the Imac worked fine with it. How can I get iMac to recognize the wireless printer setup? Thanks!

    Hi ..
    Click here >  Canon U.S.A. : Support & Drivers : PIXMA MP990
    Then click  Wireless Help
    Make sure the printer is recognized in System Preferences > Print & Scan > Print
    If not, download and install the drivers designated for the mp990 model.
    In the System Preferences > Print & Scan > Print window, click + (plus) to add the printer.

  • I have RPMs installed for flash on my Fedora Linux server. How do I get firefox to recognize it?

    The flash library is there:
    [root@cbar-linux] /root/.history # find / -name libflashplayer.so -print
    /usr/lib64/mozilla/plugins-wrapped/libflashplayer.so
    /usr/lib64/mozilla/plugins/libflashplayer.so
    /usr/lib/mozilla/plugins/libflashplayer.so
    /usr/lib/flash-plugin/libflashplayer.so
    /etc/abrt/plugins/libflashplayer.so
    The RPM is installed:
    [root@cbar-linux] /root/.history # rpm --query --all | grep -i flash
    flash-plugin-10.1.102.65-release.i386
    I have run the config both as root and as myself.
    mozilla-plugin-config -i /usr/lib/mozilla/plugins/libflashplayer.so
    I have stopped and r.estarted my firefox browser many times. It does not think flash is installed. How do I convince firefox (3.5.15) that flash is installed?

    If they are the same nef files that you were importing into your PC, see if the reason is an error message like the thread above this one. Permissions issue.

Maybe you are looking for

  • Stock Ageing Analysis

    Dear all, We are planning to Golive by September1st,2007.Customer is having some stock pretaining to some ten years back where some are  unused in the mean period of time(say from 1995 to 2007).They want to upload that stock with the relevant dates s

  • Table of contents file not taking book files into account

    Hi everyone, I've used Indesign's book panel to manage the chapters in a book that I've typeset. I set up the table of contents style (in a TOC document which is part of the books panel) and made sure that it used all the book chapters when compiling

  • Sending trigger through parallel port, C++, Visual Studio 2010, Windows 7

    Hi, I have a problem that I am really stuck with, and I am novice to the task so any help would be extremely helpful. I an trying to write to parallel port on my PC in order to send a trigger to EEG recording machine every time the new goal appears i

  • Trouble trial cnversion of PDF to word document

    I signed in for a free trial to convert pdf file to a word document for easy editing. Every time I try to convert the file. I am asked to sign in again and again. why?

  • Search Engine - Need One

    Can anyone recommend a search engine, with java api access that will run with weblogic 8.1? I want to be able to index, html, pdf, doc and query the results via a java api. Thanks