How do I get Firefox to show bookmarks in a permanent, vertical column on left side of the screen?

IE allows me to bookmark my favorites and keep them listed in a vertical column on the left side of the screen--which I keep open at all times. Is that function possible in Firefox?

To open the Bookmarks sidebar, in the View menu select Sidebar and then Bookmarks. Alternatively use the keyboard shortcut Control+B

Similar Messages

  • When a tab is close, firefox next shows the tab to the right. How do I get firefox to show the tab to the LEFT of the closed tab?

    I have 3 tabs open named 1, 2 and 3. If I close tab 2, Firefox will automatically show tab 3. How do I get Firefox to show tab 1 instead of tab 3? Basically, move to the left instead of the right?
    I searched about:config using words like: tab, open, close, next, left and right and compared the results on
    http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries to get a good idea of what each entry did. Learned a lot and reconfigured other aspects of Firefox in the process! But, I would really like to alter the way Firefox processes tab closures.
    Thank you.

    You can look at these extensions:
    *Tab Control: https://addons.mozilla.org/firefox/addon/1480
    *Tabberwocky: https://addons.mozilla.org/firefox/addon/14439
    *Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122

  • How can I get firefox to show everything from left to right, without a curser that I have to move, in win-xp?

    It used to be ok. I had a firexox teeshirt from way far back, firefox 1.0. Then i had a hemorrhagic stroke, about 3 years ago. Now i'm back, in a new place, for two months now.
    (I use my left hand now...) and once again, i have a desktop, with win-xp (and five internal harddrives, and a 600w ps.) Anyway, for the first time with my new desktop, there is a cursor in the bottom of firefox, and it doesn't show everything, left to right unless i move it.
    I've been out of commission, with only a laptop, with win-7-64bit edition, that i got just 7 months before my stroke. My sister threw away all of my desktops...many of which i built. The doctor said i may die...so my sister didn't even wait, but threw away my CLOTHES AND BOOKS AND COMPUTERS (except for the laptop), but she saved most of my harddrives...i guess i taught her how to save harddrives.
    Anyway, it's been three years, since i've had no 32bit computer with win-xp, and i can't figure out how to make things go back to the way i'm used to. HELP! I was in your forums, when my e-mail was [email protected], which it will be again , soon. But for how, how do i get firefox to show all, left to right, without a bottom cursor? i know it's possible. (And while i'm asking questions, how can i, tony mendola, get another firefox 1.0 tee shirt? i would even pay for it, even though i'm on social security-disability, with only one hand working..and no work. I used to wear it, proudly when fixing computers for others.)

    Hi manni394, what version of Firefox are you running now?
    Firefox 22 has a new way of setting the default zoom level: it is based on your Windows font size setting. So, if you set Windows fonts to 125% (enlarged 25%), your Firefox pages also will be enlarged 25%. On pages that do not adjust their layout, you may get a horizontal scroll bar.
    To reduce the zoom on a page, hold Ctrl and tap the - key (the one on the numeric keypad or the one on the number row of the keyboard). The zoom should be reduced for each tap.
    If you want to globally adjust your zoom level to be lower, you can use either of these add-ons:
    * [https://addons.mozilla.org/firefox/addon/default-fullzoom-level/ Default FullZoom Level]
    * [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint]
    If you already have one of those add-ons, check the default/global zoom level in case it needs to be adjusted.

  • How do you get the bookmarks list permanently displayed on the left side of the screen?

    I somehow managed to get the bookmarks permanently open and displayed in a vertical column on the left side of the screen. I accidentally closed it and cannot get it to display again. How do you manage to get the bookmark list permanently open and displayed again? Thank you.

    Hello exoticdoc2, see if the next [https://addons.mozilla.org/en-us/firefox/addon/all-in-one-sidebar/ All-in-One Sidebar add-on] it is useful for you, it is more than a sidebar bookmarks toolbar.
    thank you

  • My scrollbar unexpectedly has moved to the left side of the screen (only in Firefox), and I don't know how to move it back

    my scrollbar has unexpected moved to the left side of the screen in stead of the right side, and I don't know how to move it back. This only occurs in Firefox.

    Set the pref layout.scrollbar.side to ''2'' to place the scroll bar at the right side.
    See:
    * http://kb.mozillazine.org/layout.scrollbar.side (default is 0: user interface)

  • Both my daughter and I have iPhones. How do I get my daughters number off my iPad permanently? I don't even want the option to use her number for iMessages.

    Both my daughter and I have iPhones. How do I get my daughters number off my iPad permanently? I don't even want the option to use her number for iMessages.

    For starters, you should not be using the same Apple ID. Are you?

  • When I use Safari on my iPad 1/4 of the left side of the screen is grey. It seeme devoted to "shared links", "reading list", or "History". I would like to get rid of that. How can I do it?

    When I use Safari on my iPad 2, more than 1/4 of the left side of the screen is used for "shared links", "reading list", or "History". I would like to hide that. How do I do that?

    Tap the Book icon seen left of the address box.
    Best.

  • Firefox Doesn't Load Any Website and Scroll Bar Switches to the Left Side of the Screen??

    First let me say this is a work computer that I am using, so there is plenty of virus protection and firewall. I have always used firefox for all my casual internet browsing and work network needs. I recently updated to the latest version of firefox and that is when I started having problems. Almost any web page I go to wether it is my work intranet home page or a common site such as google mozilla will not finish loading the page. If I hit refresh or try to go to another site it gets wierd and the scroll bar switches to the left side of the screen and the page seems to be stuck loading. At this point almost nothing responds to any mouse clicks except for closing the firefox window. If I go to tools --> options it brings up a blank options window with only the "ok" and "cancel" buttons displayed. Help please, I don't like using IE, but right now that is my only option.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; InfoPath.1; Tablet PC 1.7; .NET CLR 1.0.3705; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    There are several reasons why the site may look wrong:
    * ''Bad item stored in the Browser Cache'': Follow the steps at [[How to clear the cache]].
    * ''Bad cookie from the broken site'': Clear cookies from the broken site by following the steps at [[Deleting cookies]].
    * Images are blocked/disabled: see [[Images or animations do not show]]
    * Plug-ins are outdated: check for outdated plugins on the [http://www.mozilla.com/en-US/plugincheck/ plugin check page].
    * Firewall software is blocking some resources on the page: see [[Firewalls]]
    * An extension may be causing the problem: see [[Troubleshooting extensions and themes]]
    For other steps to try, see [[Web sites look wrong]]

  • When I render my video I get a black bar on the left side of the screen

    I just upgraded to FCS 2 and so far it's been a complete waste of money. I'm having nothing but problems with FCP, Compressor, and QMaster. I will just post my FCP problem here.
    I've edited a weekly video podcast and everything looks great, until I render it and export it. When I render it, I get a constant, solid black bar on the far left of the video that takes up about 5% of the screen. My layers are definitely sized correctly to fill up the entire canvas, and they are all centered. I cannot figure out why I am getting this black bar or how to get rid of it without ditching the upgrade and going back to FCP5.1.
    I have already tried completely uninstalling the FCS suite and reinstalling. No luck. Any help would be GREATLY appreciated.

    Thanks for the reply.
    My original source material is in Apple Intermediate Codec, with 32-bit float audio and a variable frame rate. This has not been friendly to FCP, so I use Quicktime to convert it to Apple ProRes with 24-bit audio and 29.97 frame rate. This is what I import into FCP.
    My sequence settings are set to the same specs as my source material. 854x480, square pixels, no field dominance, Apple ProRes compression.
    The black bar on the left side of the screen shows up before I even export. It shows up when I render everything.
    I am exporting with Quicktime Conversion to:
    MP4
    h.264 codec
    720x405
    1000 video bit rate
    Main Profile
    No cropping/filters or anything.
    The ONLY thing I did different before upgrading to FCP6 was that I used Apple Intermediate Codec all the way through. I was told by an FCP instructor that writes and publishes all kinds of FCP training material that I should upgrade to FCP6 and use the Apple ProRes422 Codec instead, so that's what I'm trying to do.
    I am going back to restart my project using Apple Intermediate Codec all the way through like I used to, but it will be awhile before I can tell if that solved the problem. Either way, I would like to be using the ProRes codec....
    Thoughts?

  • How to I make pop up windows go back to the left side of the screen when they are moving to the right?

    Whenever I click on a link, a new window pops up. That's good, that's what I wanted. They've always opened on the left side of the screen. However, they are now opening in the middle of the screen. This has happened before and the screen eventually opened completely on the right. Last time this happened, I ended up having to delete something. I don't remember what, but it solved the issue. Please help!

    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    You can also try to emove the Firefox plist file (org.mozilla.firefox.plist).
    *http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
    Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist)

  • MBP display is showing a thin green line on left side of the screen

    Hi All,
    I have 15 inch Unibody MacBook Pro bought in late 2009. Specs are as below. Initially it was 4GB RAM. I upgraded it later to 8GB OWC RAM.
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,3
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.8 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          8 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP53.00AC.B03
      SMC Version (system):          1.48f2
    NVIDIA GeForce 9400M:
      Chipset Model:          NVIDIA GeForce 9400M
      Type:          Display
      Bus:          PCI
      VRAM (Total):          256 MB
      Vendor:          NVIDIA (0x10de)
      Device ID:          0x0863
      Revision ID:          0x00b1
      ROM Revision:          3448
      gMux Version:          1.8.8
      Displays:
    Color LCD:
      Resolution:          1440 x 900
      Depth:          32-Bit Color
      Core Image:          Hardware Accelerated
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Quartz Extreme:          Supported
      Built-In:          Yes
    Display Connector:
      Status:          No Display Connected
    I bought Lion from App Store recently and installed it successfully on my MBP. After few days when I left my machine running Lion from morning till evening I see a thin green line on the left side of the screen. I tried searching the web and tried few options like restarting the machine, resetting NVRAM and doing Apple hardware test (By pressing D while the machine boots). The Apple hardware test did not detect any problem. The green line still exists.
    Please suggest me how to get rid of green line.

    Hi Brent,
    I took it to apple service center. They did some checks and found out that the display has gone bad and they replced it with new one.
    Did you try connecting other display (may be Apple Display or Dell monitor) using an adapter?  In my case the Apple service center people tried doing it and the display was appearing just fine without any green line. So the fault was in my MBP display.

  • Why do I get a black rectangle on the left side of the screen when I import a clip in Imovie?

    I import a clip into imovie 6 and I get a black rectangle on the left side of the screen. It's driving me crazy!

    Thanks for the reply.
    My original source material is in Apple Intermediate Codec, with 32-bit float audio and a variable frame rate. This has not been friendly to FCP, so I use Quicktime to convert it to Apple ProRes with 24-bit audio and 29.97 frame rate. This is what I import into FCP.
    My sequence settings are set to the same specs as my source material. 854x480, square pixels, no field dominance, Apple ProRes compression.
    The black bar on the left side of the screen shows up before I even export. It shows up when I render everything.
    I am exporting with Quicktime Conversion to:
    MP4
    h.264 codec
    720x405
    1000 video bit rate
    Main Profile
    No cropping/filters or anything.
    The ONLY thing I did different before upgrading to FCP6 was that I used Apple Intermediate Codec all the way through. I was told by an FCP instructor that writes and publishes all kinds of FCP training material that I should upgrade to FCP6 and use the Apple ProRes422 Codec instead, so that's what I'm trying to do.
    I am going back to restart my project using Apple Intermediate Codec all the way through like I used to, but it will be awhile before I can tell if that solved the problem. Either way, I would like to be using the ProRes codec....
    Thoughts?

  • On FaceTime contact are on the left side of the screen...they use to be on the right side much better how do I change this listing to the right side?

    FFace time contact listing are on the left side of the screen they use to be on the right side...why the change and how can I change the listings to the right side?

    There doesn't seem to be a setting for that. As to why Apple made the change, only they would know.
    Submit your feedback directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback

  • Do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

    do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

    do any one knows how to add those arrows from the right and left side of the screen in the youtube widget which allows you to navigate back and forth between video clips?

  • HT1338 There's green mark has been shown on the left side of the screen on and off . How can I solve this problem ? Please.

    There's green mark has been shown on the left side of the screen on and off . How can I solve this problem ? Please.

    iMac (27-inch Mid 2011), Mac OS 8.6 or Earlier
    Not possible.  Which OS is currently installed on your iMac? 
    If your iMac came w/DVDs when you originally purchased it, run the Apple Hardware Test and post back the results. 
    If you are still under warranty and/or have AppleCare, call them.  Let them deal w/it. 

Maybe you are looking for

  • Slide fade not working in Captivate 5

    Hello all - The project I'm creating requires fading in on slides. I've set the slides to fade, and when viewed the slides do not in fact fade. I've heard of a workaround that by accessing the dropdown menu under Transition and selecting another fade

  • How to stop bitmap conversion

    Hi All, Here is the situation. To get the reports one global temporary table has been created. Whenever reports has to generate 1) It first insert records into temporary table from multiple tables based on select statement (here global temporary tabl

  • Using FILTER function in oracle answers

    Gurus, I have a question related to using Filter function in oracle answers. When trying to insert a Filter (expr) Using (expr) clause in the formula area of a fact table field, It errored out with msg saying about using a wrong measure. I know this

  • In v.4 fonts look blurry. Can you solve this shortcoming ?

    Fonts look blurry in the overall menu in this new version of browser (v.4). I tried all the options that you specified with the ClearType an so on... It seems that the problem is not from Windows 7 because the old version looks ok. Can you solve this

  • C=browse because: Unexpected installation error Review the Error Console log for more details. -203

    I just want to install greasemonkey...keep getting the 203 error code