How do I get firefox to work after installing an update (Can I go back to an older version if possible)?

I recently updated from Firefox 3.6.3 to 3.6.8. I skipped previous updates because of similar problem I'm experiencing now however now it is worse. Immediately after installation, messages windows pop up. The FIRST window says: “Firefox has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.”
The SECOND window (with a red circle surround a white ‘X’) says: “firefox.exe – Unable to Locate Component. This application has failed to start because xul.dll was not found. Re-installing the application may fix this problem.”
The THIRD window is called the “Mozilla Crash Reporter. We’re Sorry. Firefox has a problem and crashed…” where it gives me the option of submitting a report and restarting (which I have done).
The problem happened during previous attempted updates which is why I tend to avoid Firefox updates until today. However, in the past all I would do is manually power off the computer and restart the computer. Firefox never completed the installation so I was able to use the older version of Firefox.
Now I cannot do that because Firefox is updated to 3.6.8 which refuses to open. How can this problem get fixed? I am not “tech savvy” but loyal to Firefox (and for now I have no access to all my bookmarks).
Thank you.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.125 Safari/533.4

Hello Michael.
Hopefully this support article is what you need:
https://support.mozilla.com/en-US/kb/Firefox+will+not+start
In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.
Also, if you want to use an older version of Firefox, please use Firefox 3.5.11. Only versions 3.5.11 and 3.6.8 are supported, and both contain all the latest security fixes. Using any other version is unsafe and not recommended.

Similar Messages

  • How do you get outlook to work after installing iphoto

    has anybody been able to successfully start Outlook after installing Iphoto. I have downloaded all the updated fixes, and rebuilt Outlook's data base. but Outlook will not start...
    Thanks in advance.

    Why do you think installing iPhoto affects Outlook? I would ask that on an Outlook forum.
    Regards
    TD

  • I downloaded Adobe immigration software for Aperture, opened Lightroom, but the Aperture library was grayed out so it couldn't be selected to import. How do I get it to work? I only have a few days left on the test version of Lightroom to see how it works

    I downloaded Adobe immigration software for Aperture, opened Lightroom, but the Aperture library was grayed out so it couldn't be selected to import. How do I get it to work? I only have a few days left on the test version of Lightroom to see how it works with my Aperture library.

    Gracias photo-enthusiast por tu respuesta pero hay docenas de de usuarios que tienen esta mismo problema, me da la sensación que nos tomas por gagas que no tenemos ni idea de lo que tenemos entre manos.
    Me alegro enormemente que no hayas tenido tu este problema.

  • Just updated to 8 & now I can't open any web pages & firefox is still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

    Just updated to 8 & now I can not open any web pages as well as firefox will not close out, it still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    See "Firefox hangs when you quit it":
    *https://support.mozilla.com/kb/Firefox+hangs
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • Imessaging doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

    imessaging on ipod touch doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

    Short of a reset to factory settings I've found making sure iMessaging is not left minimised helps. It doesn't seem to keep its connection. So, by closing after each use this helps. I've been doing this since I logged out of iMessaging at least 1/2 doz times and even changed my apple id pw as this had ceased to be recognised. I get fewer send failures now and don't have an inactive send button so much. Having said this its all a bit of a work around as iMessaging isn't behaving as it once did. If over time not resolved will do factory reset. All the best.

  • Safari and app store fail to work after installing Maverick, what can I do?

    Safari and app store fail to work after installing Maverick, what can I do?

    Disk Utility (Applications - Utilities - Disk Utility) Repair Disk Permissions 2x. Then restart in Safe Mode and try both apps. Restart normally and post results.

  • HT201366 CAC readers not working after installing security update 2013-003?

    Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

    For CAC issues, see:
    MilitaryCAC's Mac OS X support landing page
    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. Can I go back to the older version? I had no trouble with that and I do not like this new version at all.

    I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. I went to the forums and tried all the suggested fixes but none worked. Can I go back to the older version? I had no trouble with that and I do not like this new version at all. I tried a system restore twice and it did not fix the problem.

    I would imagine it's the MyWay Searchbar which is classified by most anti-malware scanners as adware, or even worse as spyware. I say that because I see "SmileyCentral" in your list of plugins and that's an add-on for that particular toolbar. You can disable that via Tools | Add-ons | Plugins.
    There are a number of toolbars which won't work with Firefox 4 anymore due to the enhanced protection mechanisms in the browser.
    Mozilla recommends that you only install add-ons from its own security site @ https://addons.mozilla.org/en-US/firefox/?browse=featured Generally speaking, those have all been tested and approved. The exceptions are those currently under review which are marked with a yellow banner to warn users that they haven't passed Mozilla's labs yet.

  • Can I revert back to an older version of iphoto after having updated my iphoto?

    can I revert back to an older version of iphoto after having updated my iphoto?

    Not unless you saved a copy of the old iPhoto Library. Otherwise, you can't go back.

  • HT1420 Help me find an email address to help with issues on my ipad2 after updating to iOS 6.0. Several apps not working now that worked before updating to 6.0. Can I go back to the older version?

    Updated my Ipad2 to 6.0 and regret it. Several apps no longer work that did before update. Walgreen app for photos stopped working. Had to delete and use iPhone app. Messaging is jacked up and my Direct TV app for finding satellites doesn't work. Can I go back to the older operating system. 6.0 *****!

    Hello Michael.
    Hopefully this support article is what you need:
    https://support.mozilla.com/en-US/kb/Firefox+will+not+start
    In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.
    Also, if you want to use an older version of Firefox, please use Firefox 3.5.11. Only versions 3.5.11 and 3.6.8 are supported, and both contain all the latest security fixes. Using any other version is unsafe and not recommended.

  • Apps no longer work after installing ipad2 update 4.3.5

    Apps no longer work after installing IPad 2 update 4.3.5

    i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

  • HT201412 None of my apps works after installing latest update.

    After installing latest update on my iPad 2, none of my apps work.  I click on the app, it flicks and goes back to home screen. Powering iPad off and restarting it did not work.  Please help.

    Did you update the apps? Check app store. Most of them had updates to support the iOS 5.1.1. It's been out a while

  • Cannot use email program in ANGEL a CMS program. Can I switch back to the older version o Firefox?

    I teach with a CMS program called ANGEL which is produced by BlackBoard. When I try to email students using ANGEL email I get an error message about script
    Warning Unresponsive script:
    A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
    Script: https://angel.msu.edu/jscript/yahoo/utilities/utilities.js:9. Then if I click continue, it just does nothing, just goes into holding pattern. If I click stop script, it says the message was sent, but it doesn't actually send. I use a mac.
    I desparately need to use this program. Can I please go back to the older version of Firefox. I believe the problem is with ANGEL, but I have no choice in that as the university sponsors it. Please Help!

    You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
    *http://portableapps.com/apps/internet/firefox_portable#legacy
    *http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • My Ipone 3gs do not work well with iOS 6, can I go back to an earlier version?

    Hi
    I have always (maybe stupid!) updated my iOS version when itunes has proposed it, thinking my old iPhone 3 should work better. It is now clear for me that it is not the case!
    Can I go back to an earlier version so I can use the phone as it was meant to work?
    Have read something about if you have not save the "protocol" from an earlier version it is impossible!
    The question is also justified for all my other iPhones and Pad in my family, should I stop updates iOS versions on them as oblivious thy are becoming useless with the time, or?
    Best reg. Bilo

    Hi, excellent with all quick answers!
    It was not really meant to be rude to wjosten, but his answer was really short, short and did not help me with my problem.
    I'm surprised to hear that your 3gs is working well!
    My main reason to continue with my 3 gs (I have a iphone 5 also) is to use the GPS function in it. but from the moment I upgrade it to iOS 6.0.1 the GPS is not working well. I can not say if it is becase it is too slove or something is not supporting it. It does not matter if I use it in combination with Google Maps our my TomTom app.
    It is loosing the GPS all the time.
    The second problem is also that the 3gs is not working anymore in the TomTom car mounth holder.
    TomTom are making them so they are only working for iphone 3 (so my other 2 iphone 4 have never worked in it, but it  is in that way).
    I do not know if it is the TomTom software which is not supported by iOS6 or what...
    As I can only use the holder for my 3gs it is awast if the mobil is not working...
    Reb. Bilo

  • "Unable to Connect" error continually shows up despite having reinstalled firefox and troubleshooting. How do I get firefox to work properly again? (windows 7)

    I turned on my computer and before I could start firefox it said it was updating. When it said it had finished updating and there were no error messages indicating that the update had failed. When I opened firefox it pulled up the last tabs I had open before closing the program. None of the tabs functioned properly and gave me "unable to connect" errors even when I opened new tabs, no matter what the website was. Everything worked properly in internet explorer. I tried restarting my computer and firefox, troubleshooting, restoring firefox, uninstalling and then reinstalling firefox, checking my firewall and the problem persists. I've tried changing my proxy settings according the articles on the support page but nothing has worked. How should I fix this? Firefox is my favorite browser I would hate to give it up.

    see: [[Fix problems connecting to websites after updating Firefox|Fix problems connecting to websites after updating Firefox]]
    Also possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    https://support.mozilla.org/kb/Server+not+found
    https://support.mozilla.org/kb/Firewalls

Maybe you are looking for

  • How to fix a spinning wheel at apple logo?

    Hello STAGE ONE 1.     I have a Macbook Pro running 10.7.5 OSX. 2.     The computer is hanging at the Apple Logo at the grey spinning wheel. 3.     I did a SHFT + CTL + CMD + POWER to shutdown computer. 4.     I did a CMD + POWER and the computer com

  • Multiple account assignment PO with Asset

    Hi all I am making an Asset PO with quantity 5 and with multiple account assignment selection  & distribution on qty basis with different Asset No. for each In this PO the octroi charges are maintained. during the MIRO simulation the delivery cost is

  • Invalid *DESTINATION_APP error

    Dear All, I am facing error "Invalid *DESTINATION_APP = CSLPLANNING" in below script logic. Script Logic : *XDIM_MEMBERSET TIME=BAS(%TIME_SET%) *XDIM_MEMBERSET COSTCENTER = %COSTCENTER_SET% *XDIM_MEMBERSET VERSION = %VERSION_SET% *DESTINATION_APP = C

  • Move time machine backups to new drive drobo

    I have had nothing but trouble with my drobo 5d, and have decided to abandon it. I would like to move my backups to a new disk, and have read Pondini's FAQ on doing this. The problem with the drobo however, is that at random intervals it will disconn

  • FCP Settings for HDV "Help!"

    I have digitized some HD footage shot on a Cannon HV20 and I have set my Video settings accordingly,( frame size 1920 X 1080, Pix Aspect ratio is 1440 X 1080, edit timebase 29.27, compressor HDV 1080i60. However whenever I drag a clip onto my timelin