How do I get Flash on Firefox running on 64 bit Windows 7

I have a 64 bit version of Windows 7, but flash does not work on Firefox. I understand that Flash isn't compatible with 64 bit OS's, but supposedly it does work on 32 bit browsers, but I can't seem to get it to install and work.

Your above posted plugins list shows two Flash plugins:
# Shockwave Flash 5.0 r41
# Shockwave Flash 10.0 r45
You need to remove the old Flash 5.0 r41 version, probably installed in the plugins folder in the Firefox program folder.
C:\Program Files\Mozilla Firefox\plugins\NPSWF32.DLL
See also [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
You also have an old Shockwave for Director plugin that you also need to update.
# Macromedia Shockwave for Director Netscape plug-in, version 8.5
http://www.adobe.com/shockwave/welcome/

Similar Messages

  • How do I get external speakers to run on my Bootcamp Windows 7 partition?

    I have an intel based iMac and am running Windows 7 on bootcamp. I use the bootcamp partition more than the Mac. I hooked up some external speakers to the iMac and they function fine when running the Mac OS but they don't work when running Windows 7. The control panel in Windows doesn't recognize the speakers. Any ideas how to get the speakers functioning?

    PorterLayne wrote:
    The speakers aren't USB but are plugging directly into theheadphone jack.  This works when running the OSX partition but not the Windows side.  Bootcamp is updated to the latest version.  As for the drivers, I don't have a disc (they came with an older Gateway), but Windows isn't even recognizing that new hardware is connected so I can't search for drivers.
    Speakers that plug into the headphone jack won't have drivers.  (The computer will just see them as "headphones.")  I asked because you did not state whether you had USB speakers or not.  (USB speaker would definitely require drivers for Windows to be installed separately from anything installed in OSX, and so was the most probably issue based on your description.)
    With Windows running, unplug the speakers from the Mac.  If you will probably see a red light coming out of the headphone jack.  This means that the optical audio has been enabled.  There is some troubleshooting steps for OSX, but Apple doesn't have much on the Windows side.  Google has a few hits on people unplugging and plugging in again the plug to the headphone jack to "hit" the mechanical switch inside the jack, that determines if a optical cable is inserted or not.  In the past, an update to Boot Camp 3 drivers was offered.  In the future, when you say "latest version", you'll want to be specific to what version since the "latest version" at this point in time is version 4 and the "fix" you'll see on Google is for Boot Camp version 3.

  • Adobe Flash won't play while in Safari. It will in Firefox. How did I get Flash to play in Safari?

    Adobe Flash won't play while in Safari. It will in Firefox. How did I get Flash to play in Safari?

    Make sure plugins are enabled.
    Press Command , (comma) to open Safari Preferences then select the Security tab.
    Make sure:   Allow all other plug-ins   is selected.
    Quit and relaunch Safari.
    If you have ClickToFlash installed, that can prevent Flash content from loading.
    Either as an extension:  Safari > Preferences > Extensions
    Or  HD > Users > Library > Internet Plug-Ins

  • How can I get Flash Player and install it?

    I29/Aug/2010 17:37
    TO: Adobe Forum
    I am running Windows XP Home, and using Mozilla Firefox 3.6.8 as my browser.
    When I go to download and install the latest version of Flash Player, the ONLY option I get is to quit. In other words, I cannot download and install Flash Player. This even occurs at Adobe's own website.
    How can I get Flash Player and install it?
    Thank you in advance.
    Sincerely,
    Barry Karas

    First, you can manually download the installer here: http://get.adobe.com/flashplayer/otherversions/
    Second. On both my Mac (OS 10.6.4) and My PC (Vista Home Premium) I have had nothing but trouble with Firefox 3.6.8 and Flash player, Flash apps and Flash sites that require access to web cam or microphone or both.
    The last time Flash Player worked well with Firefox was 3.6.4, but I uninstalled 3.6.8 and went all the way back to 3.0 on both systems.
    Just a heads up. If you download the manual installer, and it still doesn't work, it ISN'T the Flash Player. It's Firefox. IE, Opera and Safari all work with it.
    Go to oldversion.com and get an older build of Firefox, uninstall 3.6.8, install the older one, go to Tools, and Options and turn off automatic checking for updates, so it doesn't try to take you back the the 3.6.8 "busted @$$ joint" that doesn't work worth poo.
    Maybe when they release 3.7, Firefox will have their act together with Adobe and Flash Player.

  • How can I get an mp4 video running on iPad Mini?

    How can I get an mp4 video running on iPad Mini, which is already in the iTunes File?

    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
     Cheers, Tom

  • I have Mac OS X 10.4.11 with 600 mhz PowerPC G3 how do i get Flash Player 10.3.183.20 (65.7 MB) power pc processor

        i have Mac OS X 10.4.11 with 600 mhz PowerPC G3 how do i get Flash Player 10.3.183.20 (65.7 MB) power pc processor?

    Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
    The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    Hack Allows PowerPC Macs to Access Flash 11 Content
    http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
     Cheers, Tom

  • How do I get Flash 11 version 9?

    How do I get Flash 11 version 9?  CBS Sports is saying they require it. 

    Flash Player 11.9 doesn't exist yet. Not even as a beta.
    11.8.800.94 is the current pluign version for IE, Firefox, Opera and Safari.
    11.8.800.115 is the current Google Chrome plugin version.
    11.8.800.156 is the newest beta version (Aug 27)

  • How do i get my ipad to run itunes 10.6

    how do i get my ipad to run itunes 10.6

    If you haven't already done so then you need to download and install iTunes on your computer and add your music to it (File > Add To Library) and you should then be able to connect your iPad to your computer and sync your music to it.
    Syncing music : http://support.apple.com/kb/HT1351
    If you have iTunes 11 on your computer then you may find the instructions on that page easier to follow if you enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC)
    If you haven't synced the iPad to that computer before then you may also find this page useful : https://discussions.apple.com/docs/DOC-3141

  • How can I get my games to run smooth with apple tv. I'm getting jerky movement

    How can I get my games to run smooth with apple tv?

    Check your network for interference (www.istumbler.net, check router manual in regards to changing channels) and other activities possibly running in the background.

  • How do I get my old Firefox back

    How can I get my old Firefox back for my Windows 7. I'm not sure what version of Firefox I had before I downloaded this new one. With this new Firefox it comes with a Yahoo search bar which I cannot stand and a lot of other buttons I don't want. With my old version I had everything the way I wanted it but now it is all gone. Please help and show me the path way back to my old Firefox.
    Thank you, Mike

    The Yahoo toolbar may have been added by an extension or other (security) software on your computer.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How do i get my old firefox back? i installed and uninstalled Aurora and it took everything with it.

    I installed Aurora your new upgrade. I didn't like it so I used my uninstaller to get rid of it. Everything I had in my old firefox went with it. Bookmarks and all. How can I get my old firefox back? Thank you.

    -> Common Questions after Updating Firefox
    * https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox
    -> Recovering important data from an old profile
    * https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
    Check and tell if its working.

  • How can I get the old Firefox back, this new one stinks

    how can I get the old Firefox back, this new one stinks

    Firefox is highly customizable and you may be able to customize it to meet your needs.
    If you do not like the new UI, you can make Firefox 4 look and behave more like Firefox 3.6, for details see http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • I have updated firefox 5.0 and it is a mesh now. No normal startpage, plugins gone, how can i get my old firefox back ?? Thanks !! in English

    Question
    i have updated firefox 5.0 and it is a mesh now. No normal startpage, no tools, no extra, plugins gone, how can i get my old firefox back ?? Thanks !!

    Simply go to:
    1.View 2.Select tool bars 3. Uncheck any of the toolbars below: a. Babylon toolbar b. Softonic Eng 7 Community tool bar!
    4.Finish.... if nothing happened try to unchechked other tool bars.

  • How can I get my macbook pro running Lion to print on my HP photosmart 309a??

    how can I get my macbook pro running Lion to print on my HP photosmart 309a??

    Did you install the drivers? Or have Software Update install them? This printer is supported:
    http://support.apple.com/kb/HT3669

  • How do I get Flash to recognize my TextInput from class?

    Hi -
    I'm trying to write a class for a standard input form. I've
    got a movieclip in the library and have linked it to this class.
    (class included below.)
    This movieclip contains several text inputs which I have
    declared in my class file. I can get their ._x and ._y values, but
    I can't assign to the .text value of the TextInput. Nor can I read
    this value when I set it in the parameters tab in flash. It just
    comes up as undefined.
    It's as though flash does not recognize the instance that was
    placed on the stage in the authoring environement as a TextInput. I
    can trace out the instance, but Flash does not treat it as a
    TextInput because I can not assign a string to the .text property.
    If I instantiate the TextInput in my class file and then
    position it on the stage - I can assign to it. But this is not as
    practical because I can not lay things out visually in Flash. How
    do I get Flash to recognize my TextInput instance on the stage from
    a class file?
    Thanks in advance!
    import mx.controls.TextInput;
    import mini.slide.*;
    class mini.slide.InfoCollect extends Slide{
    var first:TextInput;
    var testInput:TextInput;
    var last:TextInput;
    var email:TextInput;
    var address:TextInput;
    var city:TextInput;
    var zip:TextInput;
    var phone:TextInput;
    function InfoCollect(){
    trace("InfoCollect created");
    this.first = new TextInput();
    this.first.text = "testing";
    trace("this.first = " + this.first.text);
    }

    Since you are putting the assignment and trace statements in
    the Constructor function, it is possible that the textInput boxes
    have not all yet loaded. So, when you are trying to assign values
    to them, they are not present on the stage.
    Put your code in an onLoad function. That way you can insure
    that all components have loaded before you assign values to them.
    The onLoad function will be called when the "onLoad" event is
    triggered after all of your movieclip has loaded.
    function onLoad() {
    ---your code here---
    }

Maybe you are looking for