How do I get good DVD output from FX7 footage?

I just videotaped a dance concert and when I transferred the video to my computer and output it to a DL DVD, the quality is nowhere near as good as a straight HDMI connection to a TV. It doesn't even look that good on the computer in Premiere elements before I output to DVD. I'm using Adobe Premiere Elements 7. I don't know if it's the project settings for the transfer, I chose HDV 1080i 30. Is Premiere Elements maybe not going to give me what I want? My Camera is a Sony HDR-FX7
thanks,
Eric

I assume you are working with high definition video in a high definition project preset and burning as a standard DVD. How much video do you have on the DVD... for maximum quality (8Mbps with PE7) you are limited to a little over an hour for a SL DVD and 2 hours for a DL DVD. Any more footage and the bitrate will be reduced lowering the quality. If the quality is still poor you could try downconverting in the cam and capturing as DV-AVI and working in a standard definition project in PE7. Certainly in early versions of Premiere Elements this gave better quality
Other thing to consider is that your standard definition footage played on a DVD (which is a compressed format as well) is never going to look as good as the high definition video played over HDMI from the camcorder.

Similar Messages

How do I get good audio feed from DVD player to my MBP using an optic cable

I have successfully recorded audio off of concert DVD's using Sound Studio 3 by connecting my DVD player to my MBP using left/right outputs to a 35mm input. I purchased an optical cable, connected it to my DVD player and used a 35mm adapter to connnect it to my MBP input. All I get is a weird popping interferance type sound instead of clear audio. Any tips on what is going on? I have correct settings in system preferences (recognizes an optical connection) but all I hear is noise?
Thanks for any help!

I just use mac the ripper with the following instructions
http://www.ripdifferent.com/phpbb2/viewtopic.php?t=1249&sid=de5cc9506c05b6ba98d6 530884489333
It gives you a few options for audio, I generally save as AAC though you can rip as AIFF and then encode into just about anything with quicktime.

How can I get the Conditoned output from PXI 1520 in PXI 1011 combined Chassie?

Respected Sir,
I am using PXI-SCXI combined Chassie PXI 1011 for my application. I have placed three SCXI 1520 modules, a motion card PXI 7352 and PXI 6052E DAQ card in the combined chassie. You know the PXI 1520 and PXI 6052E are connected internally using the Backplane of the SCXI and is not user accessable. Now I need the conditioned output of the PXI 1520 to be used as an Analog input for the Motion Control card PXI 7352. How can I do that? Whether PXI 1180 could solve my problem? If so, how do I connect the PXI 1180 to PXI 1011?
Kindly clarify me as soon as possible.
Thanking you,
Ramkumar. D

Dear Sir,
I have already placed my DAQ card at the correct place and configured it. I need some more clarification from you. I have attached my Query in .txt format.
Kindly reply as soon as possible.
Thanks,
Ramkumar. D
Attachments:
Clarification.txt ‏2 KB

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

How Can I get multi column values from dynamic search help?

Hi Gurus;
I'm using dynamic search help in my program.
I want to get multi column values from search help. But I dont know solution for this issue.
I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
How Can I get multi column values from dynamic search help?
Thanks.

Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
There are like 3 steps.
You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined (just to keep it straight, i will be putting here) data: It_return type standard table of ddshretval.
Next step is to call the function module. Make sure you have values in IT_VALTAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
        retfield        = 'FLD2'
        value_org       = 'S'
      tables
        value_tab       = It_VALTAB
        return_tab      = It_return
        dynpfld_mapping = It_dynpfld
      exceptions
        parameter_error = 1
        no_values_found = 2
        others          = 3.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
      with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    else.
      perform get_selected_fields tables It_return.
    endif.
The code within the perform GET_SELECTED_FIELDS - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
I need a internal table as well as a work area here. like,
data: lt_fields type table of dynpread,
        la_fields type dynpread.
field-symbols: <fs_return> type ddshretval.
so fill out LT_FIELDS from the IT_RETURN table
loop at lt_return assigning <fs_return>.
    la_fields-fieldname = <fs_return>-retfield.
    la_fields-fieldvalue = <fs_return>-fieldval.
    append la_fields to lt_fields.
    clear: la_fields.
endloop.
Call the FM to update the dynpro
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname               = sy-repid
      dynumb               = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
    tables
      dynpfields           = lt_fields
    exceptions
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      undefind_error       = 7
      others               = 8.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
good luck

HT1222 my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix))

my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix)

So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

How do i get my contacts back from io5 update on my iphone 4

how do i get my contacts back from io5 update on my iphone 4

Although contacts are included with the iPhone's backup, contacts are designed to be synced with a supported address book app on your computer and/or over the air with an email account that supports it, and there are several that do which are free.
Not a good idea to depend on the iPhone or any cell phone alone for contacts which can be lost or stolen or damaged beyond repair. If the contacts are available elsewhere as designed and intended, it doesn't matter if there is a problem with your iPhone's backup in regards to this data.

How can I get specific files back from my Time Machine backup?

I wanted to make a fresh install on my MacBook Pro, in order to only have Java 8 instead of any older Java versions. So far so good. But now I want to get specific files/libraries from my external backup (USB):
One Parallels Virtual Machine
My old mail
My iPhoto Library
I don't need any settings for these, since I can easily configure them again.
I already used the Migration Assistent to restore all apps.
How can I get specific data back from the backup without restoring all stuff that I don't want anymore?
I'm now working on a new account on the fresh system, called 'Admin'. My old account was called 'Hans' (or 'hans') and I'd like to create such an account again for all my tasks.
Hans

How can I get specific data back from the backup without restoring all stuff that I don't want anymore?
I'm now working on a new account on the fresh system, called 'Admin'. My old account was called 'Hans' (or 'hans') and I'd like to create such an account again for all my tasks.
You will want to add the same User account(s) which hold the data you want to restore. So you will want to add a User account of 'Hans or hans'. Check your Time Machine back up drive to see how the User account is labeled (Hans or hans). Navigate to the Users folder and see how it's labeled.
You can then use your Time Machine back up drive and navigate to the User Home folder to copy its data over (e.g. contents from Documents, Downloads, Music, Pictures, etc.). Repeat for other Users.

I use the "Bootcamp" on my Mac to work between Mac and Windows. How do I get my iTunes music from the Mac side of my hard drive to the Windows side?

I use my "Bootcamp" harddrive to work on both the Mac side and Windows7 side of my computer. How do I get my Itunes Library from the Mac side to the Windows side of my Mac Book Pro?

Time Capsule is for backing up your data. It's not really a solution for live file storage; using it will not reduce the bloat of your boot volume.
If you have a lot of movies, music, etc. in your iTunes Library, that can be a good thing to move to an external drive. Here's how:
http://support.apple.com/kb/ht1449
After you follow those instructions to copy your media over to the external drive and point iTunes to it, you can delete it from your internal drive.

HT2291 I installed Itunes on mu laptop.I down;oaded some music. The hard drive on that computer crashed. How do i get my Itunes library from the other computer to put on my new computer?

How do i get my Itunes library from my crashed hard drive to put on my new computer? The old computer had Windows Vista and the new computer has Windows 8.

It will only be where you put it.
It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to put everything back.
If for some reason you have failed to backup ( not good), then you can transfer itunes purchases from an ipod. File>Transfer Purchases.

How do I get my phone numbers from my IPhone 4 to IPhone 4S

how do I get my phone numbers from my IPhone 4 to my new IPhone 4S?

Contacts are designed to be synced with a supported address book app on your computer, or over the air with an email account that supports it. Not a good idea to depend on an iPhone or any cell phone alone for contacts which can be lost or stolen or damaged beyond repair by being dropped, etc.
If you are syncing contacts with a supported address book app on your computer, you select the same under the Info tab for your iPhone sync preferences with iTunes followed by a sync.
If you are syncing contacts over the air with an email account that supports it, create the account with the Mail app on your new iPhone and turn Contacts on for over the air syncing with the account settings on the iPhone.
Contacts are included with the iPhone's backup. If your iPhone is being backed up with iTunes on your computer, the first time you connect a new iPhone to iTunes on a computer being synced with another iPhone, you are prompted to transfer the backup for the other iPhone or set up the new iPhone as a new iPhone.

When I print pictures from my IMAC to my Hp C8180 they are grainy, even when I select the Best Quality- Why can't I get good quality printing from Imac ?

When I print pictures from my IMAC to my Hp C8180 they are grainy, even when I select the Best Quality- Why can't I get good quality printing from Imac ? Use the same printer with a PC and printed the same picture files- they are printed with high quality- Why can't the IMAC do the same?

Does this involve iPhoto for the Mac?
How exactly are you printing these photos?
LN

How do I get the return value from an executable?

I'm running an external executable from dbms_scheduler but how do I get the exit code from the program run or any screen output?

Hi,
In the additional_info column of schedulerjob_run_details there should be something like
job of type EXECUTABLE failed with exit code: Operation not permitted
"Operation not permitted" is the error code (as translated by the errors header file for that platform).
In releases 10.2 and up there may also be a line in the additional_info
STANDARD_ERROR="Error text here"
This gives the standard error messages output by the application. There is no way to get the standard output of the application.
Hope this helps,
Ravi.

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

How can I get an itunes movie from macbook to apple tv via airplay, how can I get an itunes movie from macbook to apple tv via airplay

how can I get an itunes movie from macbook to apple tv via airplay?

You don't use Airplay. You set up Home Sharing on both and under the Computers section of AppleTV you'll then find it under Movies (or Rentals if rented), assuming it's in a compatible format.
AC

How do I get good DVD output from FX7 footage?

Similar Messages

Maybe you are looking for