How do I get headers and footers to print?
A few months ago, I upgraded from OSX Lion to OSX Mavericks.
I just converted a Numbers sheet to the new version of Numbers in Mavericks.
When I prepare to print the sheet, I can see a header (containing date and title) and a footer (containing page number and count) on every page. To be clear, these are repeating lines at the top and bottom of each page - they are not rows within the table.
When I print the sheet, none of these lines appear. What do I have to do to get them to print? I solved this problem for other sheets (several months ago) by calling Apple Care. Now, my Apple Cae has expired, Help is useless and I forget what I did before.
Can someone tell me what the magic setting is wuthn Numbers?
Thanks
Hey theoqaat,
Thanks for the question. After reviewing your post, it sounds like the headers and footers are not printing. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Numbers for Mac: Using headers and footers for printing
Thanks for using Apple Support Communities.
Have a nice day,
Mario
Similar Messages
-
In Mountain Lion, I considered myself a fairly expert user of Pages. Since "upgrading" to Mavericks, I can't get even basic things to work anymore. My current problem is that the headers and footers are only showing up on the first page of each section. A related annoyance is that if I copy the information in a header or footer, all the associated formatting disappears when I paste it. But the first problem is the one that matters — headers and footers that only show up on one page sort of negate the whole point of headers and footers.
If you click the link I posted previously, it takes you right to the Pages community.
Here > Pages: iWork: Apple Support Communities
Then click New. -
How do I Prevent Headers and Footers in Acrobat 8?
Hello.
With Acrobat 8, how do I prevent headers and footers, such as the footer below, from appearing?
(I'm not even sure if these are actually headers and footers, or something else. If they're something else, I don't know what they are called.)
I'm creating the files by right-clicking on various .HTM files, and selecting Convert to Adobe PDF in the context menu.
Thank you! Jd
file:///C|/WEB%20SITE%20April%202,%202008/vinyl/5tracks.htm (5 of 5) [4/2/2008 12:24:01 PM]
System Information:
Acrobat 8
HP Pavilion d4790y (dual core)
Windows Vista Home Premium
2 GB RAM
300 GB hard drive
Two 500 GB external hard drivesI think they are in edit preferences also, under the convert to PDF. I am not sure this is the same preference set.
-
Can't get headers and footers to work - after I enter something (page
I can't get headers and footers to work - after I enter something (page #, etc) it will show up on the first page but not subsequent pages - what am I doing wrong?!
Inspector > Layout > Section > Use previous headers and footers
Peter -
How do I change headers and footers in one single document in Pages?
How do I change headers and footers in one single document in Pages? I would appreciate any help as this seems to be quite frustrating. Thanks so much!!
Why are you not sure whether you have Mavericks or not?
And what version of Pages are you talking about?
Insert a Section Break and uncheck the copies previous option.
All the Headers and Footers are the same within a Section.
Peter -
How do I do headers and footers in a pages document
How do I change headers and footers in a pages document. New user and no help from Apple on software questions.
JeanneWhat version of Pages?
What version of OSX?
What have you tried?
Have you tried just clicking in the Header/Footer and tyoing?
Peter -
By "headers and footers" I mean the url that gets printed at the top/bottom of the page.
You can do that from
'''Firefox Menu''' > '''Print Setup''' (Press the right arrow button in the right end of print option) > '''Print setup''' > '''Margin & Header/Footer''' tab
In Header/ Footer section select '''--blank--- for ''' from drop down for everything or which ever you don't want -
How to change the font on headers and footers for printer HP Photosmart 6510
How can I change the size and font style of the headers and footers on my HP Photosmart 6510 e-All-in-One Printer series - B211
Hi friend,
it's a really really strange tip... May be it's a Forms bug? I've tried with set_item_property..and.. you're right, it doesn't work..
So.. you can try making this:
- create a visual attribute with an specific font size....
- use the
SET_ITEM_INSTANCE_PROPERTY('block.item',CURRENT_RECORD,VISUAL_ATTRIBUTE,'you_visual_attribute');
and call it from psot-change....
It works
Hope it helps,
Jose. -
Is there a way to shut off headers and footers when printing to a pdf file?
Files designed to exactly fill a page become too large when headers and footers are added and spill over onto two pages. I can't find a way to change these settings. I am working on an Apple with OS 10.4.11
There is a switch at the left side of the iphone. Try flicking that. It should mute all sounds.
-
If I do an end task on plugin_container using Windows task manager, the typing response problem seems to go away temporarily. However, the plugin_container process soon restarts itself and the typing issue returns. It has happened four or five times while typing this note. Sometimes I start typing and the display of characters typed does not appear or while typing an displaying what is typed normally all of a sudden stops being displayed and eventually is displayed all in a blast of characters.
When I try to print a web page, the header and footer info that I have selected show in the print preview but disappears when I print the page and does not print on the hard copy.
I believe that both of the above situations began when I upgraded to Firefox version 8.
I tried to search for problems like the above with Firefox but could find nothing.
I tried all of the above in IE and IE works as it has in the past.
Is this a Firefox issue with version 8 or is there something wrong with my PC all of a sudden?Response to cor-el suggestions:
I tried what you suggested as far as checking the theme (it's "Default 8.0") and deleting the sessionstore files (there was one .js file, one -1.js file and one .bak file). I still have the same slow response problems (especially typing, it has gone dead on me for a short time twice while typing this replay so far, now a third time) and lost of headers and trailers and some data.
I did the suggested actions three times just to make sure that I was doing them correctly. On the first try, the sessionstore.js and sessionstore-1.js was more than twice the size of sessionstore.bak. Since doing what was suggested, the sessionstore.js and sessionstore.bak are, I believe, the same size. I did not write down their size is why I am not certain.
The printing problem appears to only be with one website which is an investment website which I would prefer not to document here. I print from this website each weekday and I have confirmed that the printing problem started when the upgrade to version 8.0 occurred.
I need a solution to this or I am going to either go back to IE (Ugh!) or find another browser. The typing delays are an extreme annoyance since I do lots on the Internet including a lot of emailing. The delays also involve the buttons to select functions within a website.
Is there a way to get back to the version previous to version 8.0? -
Turning off headers and footers when printing a web page.
Is it possible to turn off (or reduce the size of) the
default header and footer
when printing a web page? I am using Internet Explorer 6.0.2
900, and only want
it to work with my computer and a specific printer.
I am using the directive @page normal { size : portrait;
margin : 0;} in a CSS
stylesheet specified as media="print".
ClancyOn Sat, 19 Jan 2008, David Powers wrote
>However, you are very selective in your quote. Michael
goes on to say
>(and I agree with him on this point):
>
>"The problem with logical inches and all other fixed
units of measure
>is that they do not scale well on systems with different
dot-per-inch
>settings. What may seem just right in Windows at 96 dpi
may be too
>large or too small on other systems.
Of course, but It's not a problem with logical inches per se.
The
logical inch is just another way of looking at what is meant
by the
screen dpi value. Scaling problems, with different dpi
settings, has
always been a Windows problem and results from the way that
the OS
handles scaling. Fonts scale perfectly. Actual windows, and
other
containers, don't. This is a problem programmers have
grappled with
since the first Windows OS. Vista is the first OS to try to
tackle this
problem.
>Thus, percentages or ems work best when cross-platform
compatibility is
>desired."
And that is because the users screen dpi, and hence logical
inches, are
totally irrelevant when specifying ems and percentages.
Ems and percentage equate to a number of pixels, not inches.
The sole purpose of screen dpi setting is to convert anything
sized in
physical inches into a number of screen pixels. That is the
_only_
purpose of screen dpi. It's a very simple algorithm.
(physical) inches x screen dpi value = number of pixels
How do _you_ think a font sized in points (inches) gets
translated to a
specific number of pixels on screen. I'd be interested in
your answer.
For the screen a conversion from physical inches to pixels is
always
necessary because, as you say, pixels are the unit of screen
measurement
but they are not just a "standard" measurement, they are the
only
consistent measurement. It's not the users program that
creates pixels
on screen but the Operating System. The program requests the
OS to
create a given font at a given size and the requested size
_must_ be in
pixels. Windows can't _directly_ create a screen font that's
specified
in points (inches) because it has no notion of what a
physical inch is
on screen. It does know what a logical inch is because the a
logical
inch is defined by the screen dpi value. That's what the
screen dpi
value is for. If a browser programmer wants to bypass the
variability of
screen dpi on different computers then they ignore dpi values
and work
directly in pixels i.e. in ems or percentage. When ems and
percentages
are specified one is dealing only in pixels.
> It makes a lot more sense in terms of website design to
set a
>font-size of 14px than use units that both you and
Michael Bowers
>define as "1/72 of a logical inch".
Of course it makes more sense to set font size specifically
in pixels
because that's the only unit the OS can use to put something
on screen.
I can't see where you get the idea that either Michael Bowers
or I have
said that there is a unit "defined as 1/72 of a logical
inch". Every
Windows program written takes it that there are 72 points to
a
_physical_ inch.
>
>Yes, you *can* use points to set font sizes (or any other
measurement)
>in CSS for onscreen display, but your fixation with
logical inches
>appears to add little of practical value to choosing the
most
>appropriate measures for designing pages to be viewed on
displays of
>various sizes and resolutions.
You are implying I've said things which I haven't. I have
never, at any
time, said one should use points or inches in designing web
pages. You
seem to have missed the point that what I am doing is
explaining why you
see the results you do on screen when those unit are used.
Somewhat more
informed than "Points are only for print because I don't know
what they
mean on screen, so they must be meaningless".
>As Eric Meyer says on page 110 of "Cascading Style
Sheets: The
>Definitive Guide" (2nd Edition), "points can be a very
difficult
>measurement to use in document design."
And again, I've never advocated using them in page design. A
close
reading, however, from page 83 onwards shows that Eric Meyer
has an
imperfect notion of the meaning of screen dpi. Heresy!! He's
hardly
alone, which is why I did a web site.
>
>That's why I recommend leaving points for use in print
style sheets.
>However, if you enjoy making life difficult for yourself
by using
>points for onscreen design, you're perfectly free to do
so.
Once again, I have never advocated that. You are setting up a
straw man
to knock down. You can do better than that.
Richard Mason
http://www.emdpi.com -
How to know how many rows including headers and footers does subreport has from Main Report
Hi, we are sturuggling with subreports. Main report has 3 subreports, each subreport is inplmented in a group header(3 subreports and 3 group headers). We would like to print a group header under subreport as a column header every page, and need a page break when group number is changed. This report exports a MS Excel(97-2003) report file.
In main report, [New After Page] is checked under Group Header #1d from [Section Expert]
In each subreport, [Repeat Group Header On Each Page] is checked under the highest group from [Group Expert]
Here are two issues;
Since Crystal Reports has more rows than Excel in one page, colmun header in each subreport is being printed in the middle of the page. It should be printed at the top of the page
When Subreport has many rows and has to be printed in more than 1 page, a page break is automatically inserted before column header. It should be printed right below column header which is Group Header #1
We have been trying to pass row counts(count of group header because group header is used as the details) using a shared variable from Subreport 1 to Subreport 2 via main report since Subreport2 cannot predict how many rows Subreport 1 has.
Here is what we are trying but we are getting an error which is "A constant expression is required here" under main report
- In Sunreport 1
whileprintingrecords;
shared numbervar SubGroupCount := DistinctCount({Table.Field});
- In Mainreport
shared numbervar SubGroupCount;
if(pagenumber) = 1
then (SubGroupCount)
else 50
Is there any solutionss or better ways other than above?
Thank you,
Main Report: Group Header #1a --> as Page Header
Run Date: mm/dd/yyyy Report Name
Main Report Group Header #1b --> Subreport 1
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Main Report Goup Header #1c --> Subreport 2
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Main Report Froup Header #1d --> Subreport 3
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6Thank you for your reply and sorry for my complicated explanations. The report has confidential information, so I replaced to some fake data but I believe you can still see what I am trying to do..
Main Report
Subreport 2
Output1
Output2: the following page
--> more rows are printed..
We have two problems;
1. The column header in Output2 is supposed to be pronted right below the last row in Output2, however, a page break is automatically inserted. But even in the same output document, it works for some group when it has a few rows..
2. Since Crystal Reports prints more rows in one page than MS Excel does, Column header is not be printed at the top of the page.
I tried the way you advised me but it did not work.. -
How can I trim headers and footers off content to be scraped/rewritten in a channel?
I would like to obtain the raw html code after the rewriting functionality has already taken place to manipulate the HTML code. Basically removing the fluff at the top and bottom. In this way, I can include a subset of the HTML page, rewritten in a channel. Is there an API call to the gateway to request a URL and get the returned rewritten HTML back? If not, there should be.
Currently there are no api's available for the rewriter or the gateway. Can you explain a little more in detail , what you are trying to do, so I can tell you if there are any possible ways to do that with portal.
-
How do I display Headers and Footers in iBooks Author?
I want the pages of the book I'm working on to display the chapter title at the bottom of the page next to the page number. Is this possible to do with iBooks Author?
For example, if Chapter 1 is entitled "California," I'd like there to be a footer at the bottom of the page 3 that says "California 3"Well, it's not the most elegant solution, but it seems to get the job done. Thanks!
At least when I create a text box, place it at the bottom of the page, then copy and paste the text box at the bottom of the next page, the program places it in the same position on the page as the first box I created. That makes it a little easier to keep them consistent. -
Help needed - Headers and footers of subtemplates not working.
Hi,
I need to call 3 different subtemplates from the main template. Headers and footers of these subtemplates are differenet. When i call these subtemplates headers and footers is not getting displayed.
Can anyone please suggest how to display the headers and footers of subtemplates when called from another template.
Thanks.Hi,
Thanks for your reply. Do you mean to call the headers and footers from the main template or in the sub template. I cant call in the main template because the headers and footers are different for each template. I used micrsosoft headers and footers in sub templates. But it didnt work. So created header and footer templates in the sub template and called them from the same sub templates using the call: statements. But when i run the prog am getting the below warning.
Beginning post-processing of request 35618954 on node DSOTEST6HE at 15-FEB-2010 03:37:41.
Post-processing of request 35618954 failed at 15-FEB-2010 03:37:42 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Note: am running the running prog from XML Publisher responsinilty and not from BIEE standalone.
Thanks.
Maybe you are looking for
-
Fillable form will not print the second page
I have created a fillable two-page Acrobat form using Adobe InDesign. Everything appears to be okay with the form, except that the second page does not print. The first page prints okay, but the second page exits as a blank page without content fro
-
Firefox won't save DMG files and won't mount the disk image. Why?
When I try to install a download I am asked to either save the DMG file or Open using .... I select save, but the disk image never appears on my desktop and nothing shows in the Tools-Downloads window.
-
Can we use idoc technique to change or delete the vendor master data?
Hi,gurus, Can we use idoc technique to change or delete the vendor master data?You know we can create vendor data using idoc CREMAS03 as the receiver adapter,but when change or delete the specified vendor data,must we use RFC adapter technique? Anoth
-
Sap basis /netweaver admin
Guys, For some one to start in sap basis admin,what are the recommended OSS notes or pdf / link available. THANKS
-
Since updating to the newest iOS.6 I am unable to save photos to my iPad 2