How do I get iBook open at the bookshelf rather than one of my books?

How do I get iBook to open to the bookshelf rather than a book? I hit the iBook icon, it opens at a page in a book.  How do I get to the bookshelf?

If it is opening to a book, then when you are exiting the app you are not going back to the bookshelf first. Before you click the Home button to exit the app, tap the Library button in the upper left corner of the display. That will take you back to the bookshelf so the next time you open the app it will open to the bookshelf instead of the last book you were reading.
Hope that helps!

Similar Messages

  • How can I get synched audio through the computer rather than camera in FCE?

    There does not seem to be an easy way to listen to FCE audio through the computer's setup for internal or external speakers. I have for years used Detour to route all of my audio through an M-Audio Firewire 410 interface, and then on to my home stereo system. I then route all systems sounds and sounds in apps like iMail through the internal speaker. This works great. Except with Final Cut Express. For quite a while I could not do anything except play through a firewire connected to an attached Sony PC100 digital video camera, plugging headphones into it's jack.
    After many hours and reading many strings on this and other discussion boards, and even reading the product manual, I tried sending FCE through the computer speaker and sure enough it works. By that reasoning, I had Sound Prefs send all audio through the m-Audio setup and that works. Except now I must listen to all of the system sounds that way as well.
    OK, I could live with that for my editing sessions, except that now I am experiencing a sound synch delay of around one second. It's all fine when I switch back to the camera as the monitor, but not when routed through, what should be the better sound setup, having the comouter send the soud via the m-audio and stereo.
    G5 dual 2Mgz   Mac OS X (10.4.5)   m-audio firewire 410; 1.5G DDR SRAM;

    In final cut, you want the audio to be following the same path as the video - otherwise, as you have experienced, there are processing delays.
    If you are sending your video out firewire to an external monitor, the audio should follow. Take the audio off of the A/DV converter and route it to your speakers (or amp & speakers) from there.
    good luck.
    x

  • How do I move multiple clips at once in the project rather than one a time?

    I know how to cut and then paste to move one clip within the project to a new place within the project, but how do I move a group all at once rather than one at a time?

    This did not help and that did not work.  I had already tried that   Holding down either the command key does "highlight" multiple items but then you cannot move those items to a new spot.

  • I dowloard a book sample to iBook. I then deleted it and bought the book and downloaded it. The search engine will only search the 45-page sample and not the full book. How do I get iBook to search the full book?

    I downloaded a book sample to iBook. I deleted it and then bought the full book and downloaded it. The search engine keeps only searching the sample, about 50 pages, and not the full book. How do I get the search engine to search the full book?

    I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
    I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
    Error getting License. License Server Communication Problem only mine says  Bad Device key after.
    Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
    i hope someone answers this soon.

  • How to get Drafts Mailbox at the top rather than in ON MY MAC

    My wife is switching from Entourage to Mail and I can't get her set up the same as I have been in Mail for years. At the top of the left panel I have Inbox, Drafts, Sent and Trash, with sub listings for each of my mail accounts, followed by SMART MAILBOXES and ON MY MAC. My wife has the same except for the Drafts and its sub listings. Instead, she has several Drafts Mailboxes (1 for each email account) under ON MY MAC. How do I get Drafts at the top as I have it?

    Then it may be that by some action, some existing Drafts mailboxes were found, and Mail moved them to the On My Mac section.
    Has she yet in Mail composed a message, clicked on Save as Draft before sending, and checked to see if that has been saved in newly created Draft mailbox in the location you expected?
    Ernie

  • How do I get an app icon to show rather than have a black icon showing?

    One icon on my iPad is black.  I know the icon for this app is not all black.  How can I get it to appear as the actual icon rather than all black.

    Is it A App from the Apps store if it is Delete then go to Apps store &put back on again
    If it,s one that was on ipad at set up try holding power button down & menu button
    Until Apple Logo come on let go and wait do not move red slider
    No data will be lost.
    BSYDD  uk

  • How do i get my ipod touch to download more than one app at a time, can i make it toware i dont have to wait for one app to download before it starts downloading another,

    my ipod will only download one app at a time and runs extremely slow. i was wondering if there is some way that i can make it download more than one app at a time and how can i make the app start downloading again after i have left my wi-fi zone and then went back in. im really confused.

    Download everything on your computer in iTunes, then sync your iPod to iTunes.
    You should be syncing (backing up) to iTunes and your photo app regurally, anyway.

  • How can I get users who accessed the database during last one month

    Hi All,
    How can get the list of users who logged on to the database DBProd and made changes to the tables of particular schema during say last month and current month.
    Thanks & Regards.

    DBA_PRIV_AUDIT_OPTS :-Describes current system privileges being audited across the system and by user and who has updated what can be done through trigger which would send the information to a history table. If you have it ready ask your team..
    SQL> select PRIVILEGE,SUCCESS,FAILURE from DBA_PRIV_AUDIT_OPTS where user_name='SCOTT';
    no rows selected
    SQL> audit ALTER SYSTEM by scott by access whenever not successful;
    Audit succeeded.
    SQL> audit session by scott by access;
    Audit succeeded.
    SQL> select PRIVILEGE,SUCCESS,FAILURE from DBA_PRIV_AUDIT_OPTS where user_name='SCOTT';
    PRIVILEGE SUCCESS FAILURE
    CREATE SESSION BY ACCESS BY ACCESS
    ALTER SYSTEM NOT SET BY ACCESS
    Regards
    Karan
    Edited by: Karan on Aug 2, 2012 7:15 PM

  • How can I get my emails to send again rather than sitting in my outbox

    My emails used to send automatically now they get stuck in the outbox and I haven't changed anything unless the update has affected my phone somehow.

    The update erased your user ID and password from the outgoing (SMTP) mail server. You need to go enter them again (even though it may say "optional").

  • How can i get my HP eney to scan more than one page into a single pdf?

    i want to scan mulitple pages into a single document

    Hello,
    Please click HERE to access the steps that should resolve the issue for Win 7.
    Please click HERE to access the steps that should resolve the issue Win 8.
    Go to section How to scan with HP software  >> How to scan multiple pages into a single file 
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • How do you get a song to play for more than one slide???

    I'm new to mac and I am trying to create a birthday video but the audio will not continue for more than 1 slide. I can do it in powerpoint but I want to burn the presentation onto DVD. Thanks for your help!

    I just created a slideshow using Keynote and I just moved the song from iTunes into the inspector --> document --> audio. There is a small box that you just put the song into and it automatically plays, either once or looped.

  • How can I move a clip on the timeline less than one frame?

    I need to move an audio clip on the timeline to match the video but it snaps one frame at a time and I need to move it less than that.?

    I've just had a look.
    Try
    Edit
    Keyboard Shortcuts
    Panels
    Program Monitor Panel
    Program Monitor Panel Menu
    You should then find this:
    You can then set up your preferred shortcut key.

  • How do I get my iPhone to play music rather than just scrolling through

    I synced my new iPhone 4S to my computer and now I can't play my music. It just scrolled through the titles.

    Did you check to see that shuffle is is turned off?  To do this, while playing a song tap the cover art to reveal the additional controls if they are not already visible (see photo below).  Then tap the shuffle button (bottom right) until it turns white (white is off).

  • Why does Firefox 5 open external (internet, SMTP) e-mail in the browser rather than the Lotus Notes Client?

    Using Lotus Notes as the system's primary mail client, '''some''' users experience external mail being opened in the browser rather than the the client. When they revert back to using an older version as the OS default browser, or indeed a different browser altogether, this does not happen.
    Again, this does not happen with all installations of 5.0 - just a few.

    go to "preferences" in Lotus Notes and enable "disable embodded browser for MIME mail" and it shoudn't open the browser anymore

  • I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
    You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
    You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
    Menu > Format > Import Styles
    The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
    Peter

Maybe you are looking for

  • Wicd takes a long time to refresh

    Ok, I am not entirely sure what will be relevant to this inquiry, so I will wait a post to put up the needed logs or config files. Right now, dbus, hal, wicd and wicd-client all load. The iwlagn module loads. The trouble is that Wicd started taking a

  • Cant add a printer in Windows 2008 Server printer server HP LaserJet P1606dn

    Hello, I am trying to install a HP LaserJet P1606dn printer in a Windows 2008 Server Virtual machine. The printer is connected to the corporate network and I am able to do ping from my desktop to the printer. Then I follow this steps. 1.- Install the

  • How to Restrict the consumer data flow from CRM to R/3

    Hi Experts I have a scenario where my client doesn't wish to flow consumers data into R/3 which are created in CRM's B2C shop.He wants to map consumer data with R/3 One time customers so that further process such as Delivery  and all take place and t

  • My mac was recently cleaned up and I no longer have iPhoto

    ...or any of my photos.  The error message says to download a version for osx.  I have been having trouble finding this download. Will I be able to find my photos somewhere?Please advise. I have osx10.7.5 thanks

  • Background job only sends 1 spooljob of report in gr55 ?

    in gr55 we want to run a report in the background and send it by email to the user. we noticed that by running in forground we get like 10 pages of output but as we schedule it in sm37 with the same variant that the user only receives 1 page. I notic