How do i get idisk in finder with lion

how do i get idisk in finder with lion?

In OS X 10.7.2, when you go into "finder/preferences/devices/sidebar" all that is listed there is:
Administrator's computer
Hard disks
External disks
CDs, DVDs, and iPods
There is no mention at all of "iDisks" ... nothing to "check." I'm paying a lot for my iDisk, but there is no way that I can see to access it from this OS X 10.7.2 operating system. What do I do?

Similar Messages

How do I get steam to work with lion?

How do I get Steam to install with Lion? Worked ok with Snow Leopard.

Working for me, was it installed previously or are you trying a new download ?
I am seeing some total freeze ups after several hours playing however, nothing gets out of it bar the power button.

How can I get iPhoto to work with Lion? It comes up with an error about not working with this version of MAC os.omes up with an error

Iphoto was working fine until I downloaded and installed LION. Now I get a problem message to check that iphoto is compatible with this version of MAC OS X.
I always download software updates.

Have put iphoto into trash and tried to re-install it from cd, but although it is there on the list when I try to install, it is not in bold and does not permit me to tick it.
I have been to the app store and it tells me that iphoto is on my computer.

How do I get fios to work with my new desktop w/ Windows Media Center

Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

Based on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

My old appleID use email with domain already deactivate. So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

Hi ccharat,
Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
I hope this helps,
-Joe

I've moved my iTunes media to a new drive, how do I get iTunes to find it. I'm using Windows 7

Hi,
I've moved my iTunes media to my 'spare' internal D Drive, following the instructions on this link:(I'm using Windows 7).
Move your iTunes Media folder on a Windows PC - Apple Support
I hit a problem at stage 11 when I had to move my original media file to the recycle bin. The process started then it stopped, saying that the file was too big for the recycle bin (54 GB or thereabouts). It then asked if I wanted to permanently delete the files instead. I said yes. (I have them backed up externally).
The iTunes media file is in my D Drive, but I can't get iTunes to locate it. I've tried going through preferences/advanced and browsing to it but that does't seem to work.
My media is all listed in iTunes, but on the cloud rather than on my hard drive (C). Downloading it all from the cloud would defeat the object of freeing space on my primary hard drive (C).
Any ideas on how I could get iTunes to find the files on D Drive ?
many thanks,
Matt

See Make a split library portable. With luck you should be able to move the iTunes folder to the D: drive, place the iTunes Media folder inside it, and shift-start iTunes to connect to D:\iTunes\iTunes Library.itl. If all goes well it should be as if you'd moved the entire iTunes folder as a unit in the first place.
tt2

Dear Customer Service Team, I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I

Dear Customer Service Team,
I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I can not find it and now I only have access to the trial version.
Thank you for your help in advance.
Kind Regards,
G. Zsolt

There is no serial number require for Creative Cloud products, you may activate the products using your email address and password which is associated with Adobe. If your Dreamweaver asking for serial number, then make sure you are signing in with correct email address.
You may also refer below link
Sign in, activation, or connection errors | CS5.5 and later

When I look up email addresses in Outlook 2010 on my pc, it only finds cell phones. How do I get it to find email addresses automatically?

When I look up email addresses in Outlook 2010 on my pc, it only finds cell phones.numbers. How do I get it to find email addresses automatically?

Addl question: when I DO send an email from the address book, they are all coming back with the msg:
The following recipient(s) cannot be reached: & None of your e-mail accounts could send to this recipient.
But when I type in the exact same address manually, it goes thru just fine.

How do I get Lightroom to find photos on a USB Drive when the Drive letter changes?

THis is probably a simple question but I keep getting stuck. I ha
ve my catalog and some images on my laptop hard drive, but the majority are on
an external USB drive. Sometoimes the drive gets assigned
E:, F;, or G:, and when it cahnges, the catalog says the phots are missing. How do I get
Lightroom to find the photos again?
Tom Barnwell

The quick fix is to click on the folder containing the missing files and choose "update Folder Location" then find the folder on the USB drive. The longer term and fix you should apply is to set Windows to always give the USB the same drive letter. You can do this through the XP Disk Management application in Computer Management (Control Panel applet). The following screenshot is for XP, but Vista and Win 7 will something similar which can be accessed via Administrative Tools (see second screenshot).

When I first turned on iMovie all videos from iPhoto automatically were found. Now I have more videos on iphoto, how do I get iMovie to find the new ones?

When I first turned on iMovie all videos from iPhoto automatically were found. Now I have more videos on iphoto, how do I get iMovie to find the new ones?

jtcollins wrote:
if iMovie is open, connect your iPhone to comp. iMovie '11 will now find your phone and look for videos as it would if camera was connected
(Underline is my emphasis)
Hi jt - Alex was actually referring to video clips in iPhoto not appearing in the item "iPhoto Videos" in the Events Library in iMovie - thanks for your post though (the 2 words are very similar).
John

How can I get to DFU mode with a broken power button?

How can I get to DFU mode with a broken power button?

aarons84 wrote:
This is bad, but i tried jailbraking my iphone
You may as well stop there. We can't help you.

How can I sync my various email accounts into an iCloud account. Example. I have an embarqmail.account. How can I get it to sync with iPhone, iPad, iMac so that I don't have to read or review eMails on all 3 devices. Thanks

How can I sync my various email accounts into an iCloud account. Example. I have an embarqmail.account. How can I get it to sync with iPhone, iPad, iMac so that I don't have to read or review eMails on all 3 devices. Thanks

You need OSX 10.7.2 or higher in order to access icloud. The mobile me account is now defunct (it closed down more than a year ago).

How can I get Tracker to find a shared review PDF initiated in another domain?

I initiated a shared review for a PDF and stored it on a network server in domain X. Subseqauently, the server was moved into a different domain, call it Y.
Now, Acrobat Tracker can't find the PDF ... and reviewers can no longer access the PDF.
How can I get Tracker to find the PDF in the new domain Y?

No, this is not possible. You need to initiate the review again. This is because the review server information is embedded inside the PDF and when you change the review server, the JavaScript embedded in PDF still refers to the old server. So Tracker is unable to locate the review PDF.
If the old review has comments by other reviewers, you can save it as an archive and initiate review on new server on this new PDF. This way all the review comments can be retained in the PDF but they will be published "on behalf of" the initiator now.
Hope that helps.

IOS 6.1.3 / Windows 7 - 64 bit. I am connecting my IPhone 4 to my Windows desktop, in ITunes I click on IPhone and then the "Check for Update" tab. It takes me to a Windows explorer window. How do I get it to find updates?

IOS 6.1.3 / Windows 7 - 64 bit. I am connecting my IPhone 4 to my Windows desktop, in ITunes I click on IPhone and then the "Check for Update" tab. It takes me to a Windows explorer window. How do I get it to find updates?

Hello ibebry
Try using the Software Update on your iPhone by going to Settings > General > Software Update. One thing to keep in mind if you are trying it on the computer is to make sure that you are not pressing any keys down when checking for updates as that may bring up a pop up window to find the update file.
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Regards,
-Norm G.

How do i get idisk in finder with lion

Similar Messages

Maybe you are looking for