How do I get Image Capture to recognize a printer on my network?
I just got a new MacBook Pro. I have my epson printer on my network. How do I get Image Capture to recognize that I have a printer. Nothing comes up on devices. I'm sort of stabbing in the dark at network settings and I downloaded the latest Epson driver. Nothing seems to work. Can anyone help? Suz
In Image Capture, a network printer / scanner will appear under "Shared". If it is hidden, a number will appear adjacent to it, representing the number of hidden devices.
If it still does not appear, try resetting the printing system: Mac OS X: How to reset the printing system
After you do that you will need to add the device again according to the instructions here:
OS X Mavericks: Set up a printer
Follow the instructions below Add a network printer
Also read:
Troubleshooting printer issues in OS X
Similar Messages
-
How do I get Image Capture to recognize my iPhone so I can transfer videos to my MacBook ?
I cannot delete my old email from my Apple Discussions Profile.
I have an iPhone that is not letting me transfer videos I take with the Camera App onto my MacBook Air.
My photos transfer fine but the videos don't transfer at all.
I have tried Image Capture too and this does not even recognize my iPhone.
I have tried different USB cables and still no luck.
Even though one workaround is emailing videos to myself from my iPhone
this is not ideal because it compresses the files - thus losing video quality - and
it is super time-consuming because I have long videos that I need to break up into smaller clips
in my emails and I have almost 200 videos in all.
I think I have iPhone 5 but I don't know how to confirm.
Please advise.
Many thanks
<Email Edited By Host>In Image Capture, a network printer / scanner will appear under "Shared". If it is hidden, a number will appear adjacent to it, representing the number of hidden devices.
If it still does not appear, try resetting the printing system: Mac OS X: How to reset the printing system
After you do that you will need to add the device again according to the instructions here:
OS X Mavericks: Set up a printer
Follow the instructions below Add a network printer
Also read:
Troubleshooting printer issues in OS X -
How do I get my iPad to recognize my compatible wireless printer?
http://www.apple.com/support/ipad/assistant/airprint/
-
HT3771 How do I get my computer to recognize my printer and print both Windows7 and Safari?
I added Parallel software to my MacBook Pro 10.6.8.It was printing fine then asked me to connect usb. I was just choosing esc. I think I chose connect Windows. Now won't print some things. How do I get it to print all things on both sides? Thanks for your time
You need to connect your printer to your WiFi router wirelessly - maybe by using the printer's front panel (if it has one) or maybe by using a Windows (usually) PC connected to the printer with a USB cable.
Once that's done, you can disconnect the USB cable, and print wirelessly. From your description, I'm not sure you've done this required first step. -
How do I get Photoshop Elements12 to recognize my printer/scanner?
I have Photoshop Elements6 and just upgraded to 12... but 12 doesn't 'see' my scanner, the import option is grayed out... I just downloaded new drivers for my printer, but that didn't seem to help. Anyway, I can get my money back for this worthless upgrade?
I've a similar issue. I installed the trial of Photoshop Elements 11, and had my daughter set it up so that I could scan directly into the application. Worked perfectly.
By the time I purchased Elements, 12 had been released.
We attempted to install 12 tonight, and all went well. BUT! 12 will not recognise the Twain plugin. It is moved correctly as per the instructions for both 11 and 12.
My daughter attempted to trouble shoot but none of the solutions clearly available work. In vain, she reinstalled 11 as I still had my original trial download, re-set that up with the correct Twain plugin and it works perfectly.
How can I force 12 to also comply?
Message was edited by: Rossco75 -
Ho do I convert my Elements 5 Catalog to Elements 13 which I just purchased. I followed one of the tutorials and converted my Elements 5 Catalog to a "pse.13db" file. How do I get Elements 13 to recognize that converted file? When I open Elements 13 Catalog Manager and browse to the correct location, it doesn't show the file. Help! Thanks
Bumps a écrit:
Yes - I can run both versions on my PC. But I really would like to have all of my pictures in the same catalog.
You can't merge catalogs (even PSE13 ones) in any PSE version (only LR can do that). So, converting catalogs is not the solution to your problem.
Since you have PSE5 working on your computer and your images also, the solution is to 'write metadata to files in PSE5) and to re-import the images in the PSE13 catalog. That won't duplicate your image files and you'll lose albums/collections, stacks and version sets, but you'll recover tags, captions and ratings.
To be able to re-import the files indexed in PSE5, you may have to move them to a new master folder.
I am not sure what your problem with the conversion may be. It's quite possible that the resulting catalog.pse13db is ok and that the issue lies in the ability to open it in the PSE13 organizer.
As stated by dj_page, double clicking on that file should open the organizer with the new catalog. You could test that by creating a dummy catalog in PSE13 and importing a small batch of photos. Locate the path of the catalog with the menu Help/system info. Copy the catalog.pse13db in another folder and the 'double click' way to open the organizer with that moved catalog database.
For other users that may be interested in using PSE5 (issued in 2006) on newer OS, here is a useful link:
Adobe - Photoshop Elements : For Windows : Adobe Photoshop Elements 5.0.2 update -
How do I get Quick menu to recognize both my Canon printer & Canon scanner?
When I installed my printer, the settings in Quick menu for my scanner were wiped out. How do I get Quick menu to recognize both devices?
Hi DGA,
In order for scanner options for both models to show up, you must have both the MP Navigator for the LiDE 210 installed and the My Image Garden for the MG3220 installed. Please make sure you have both by going to your Start screen, then type in either MP Navigator or My Image Garden into the start screen. Once you start typing it will search your computer for those programs and will display an icon if installed.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly? My printer is a Brother MFC-J270W
try disabling email scanning for incoming mail.
One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored. -
How do I get my itunes to recognize my account, it seems to be stuck on my friend account even when my ID show up as sign in, only when I try to update an App, that my friend account appear. I try to reset it on the computer and the phone itself, but no luck. Please advise
Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg -
when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?
What version of iTunes are you running on your computer? You need to update to the current version.
-
new iphone. (someone else put in their username and password. so i had lots of apps that i had to eliminate but do NOT wish to compromise the contact list) time for me to update the iphone. downloaded itunes onto pc. plugged in iphone and waiting for prompt to show phone. pc thinks it is the camera. how do i get itunes/pc to recognize iphone ? then, how do i backup contacts and proceed before updating iphone?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes or iPhone forums.
Regards. -
When browsing a new library that I created and exported onto an external hard drive, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle, the image appears, but all the other rectangles remain empty - no image. How do I get images to appear in the browser rectangles? I am viewing this on a second computer (an older intel duo iMac), not the one I created the library on (a MacBook Pro). Both computers have Aperture 3.2.4 installed. When I return the external to the MacBook, all images appear in browser rectangles. What's happening on the iMac?
You may have a problem with the permissions on your external volume. Probably you are not the owner of your library on the second mac.
If you have not already done so, set the "Ignore Ownership on this Volume" flag on your external volume. To do this, select the volume in the Finder and use the Finder command "File > Get Info" (or ⌘I).
In the "Get Info" panel disclose the "Sharing & Permissions" brick, open the padlock, and enable the "Ignore Ownership on this Volume" flag. You will have to authentificate as administrator to do this.
Then run the "Aperture Library First Aid Tools" on this library and repair the permissions. To launch the "First Aid Tools" hold down the ⌥⌘-key combination while you double click your Aperture Library. Select "Repair Permissions" and run the repair; then repeat with "Repair Database". Do this on the omputer where you created the library and where you can see the thumbnails.
Then check, if you now are able to read the library properly on your iMac.
Regards
Léonie -
I recently got an Iphone and after I installed it on my computer my 2 ipods are no longer able to sync to the computer how do I get the computer to recognize the 2 different ipods so I can still use them?
Since you already had two iPod before getting the iPhone, what exactly did you need to "install" to use the iPhone? Doesn't it use to the same iTunes installation you already used with the iPods?
So, I guess my question is, what changed on the computer when you started using the iPhone?
What happens now when you connect the iPod? Is the iPod still seen in Windows device manager? -
I recently changed my email address and updated my password. However, when I connect my iPhone 4 it defaults to my old email address which is no longer valid. How do I get my phone to recognize my updated email address and how do I now change the iPhone 4 to recognize the new address? I wish to delete all reference to the old address. All help would be appreciated.
Hi.
Here is a procedure that should help.
1. Go to "Settings"
2. Go to "Mail, Contacts, Calendars"
3. Click the account you don't want anymore
4. Go to the bottom and click "Delete Account"
5. Confirm the deletion
6. Go back to "Mail, Contacts, Calendars" (if you're not there already)
7. Add your new account
Maybe you are looking for
-
JDODataStoreException: The instance null does not exist in the data store
I'm unable to figure out how this exception occurs. I have a class IDCounter which has a number of fields such as 'm_Name' (String) 'm_AccountName' (String) 'm_UserName' (String) 'm_Description' (String) 'm_CreationDate' (Date) 'm_LastModifiedDate' (
-
Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory settings and restored, still no wifi. Will next release of iOS address this problem?
-
Highlight Fields when PDF is opened - LiveCycle 8
LiveCycle 8 Win XP Hi, I'm trying to automatically highlight the form fields on a PDF when it is opened. I want the form to act as though the user has chosen the "Highlight Fields" option/button. I would prefer a javascript function to fire (on itial
-
System Builder or regular Windows 7 home premium?
Hi, Which is the best option between the Windows 7 Home Premium SP1 64bit (Full) System Builder DVD 1 Pack and the Microsoft Windows 7 Home Premium? The System Builder is about $60 cheaper but I'm not sure which one you're supposed to use. Also, is i
-
Hi All, I wanted to get five copies of same invoices at a sigle print with different headings (to vendor,office copy,duplicate,triplicateetc..) How it is possible in B1 By Firos C