How do I get iMovie to recognise & allow me to use the built in iSight camera?

How do I get iMovie to recognise & allow me to use the built in iSight camera?

You do not mention what version of iMovie you are using, so I will assume it is the same as mine, iMovie '11, version 9.0.8
When you launch iMovie you should see, just above the Event Library, a camera icon. Click that.
Once you click it you will see a new window labeled "Import From: Built-in iSight." In the bottom right corner there will be a button labeled "Capture." Use that when you are ready to capture your video.
Best of luck.

Similar Messages

  • How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

    How can I use the built-in Isight camera and an external video camera at the same time?
    I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
    Thanks

    Simple question with a not so simple answer.
    (a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations.  Digital video is processor intensive.  The only way to know if your Mac can do this it to try it.  If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus.  You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
    (b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
    How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
    (1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
    If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
    This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
    (2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
    Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
    Other iMovie versions work slightly differently.
    iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
      http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
    iMovie 8 (from iLife '09) is slightly different as explained in this article:
      http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
    In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
    (3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
    Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
    However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
    (If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
    (4) For FaceTime, launch the app and click the Video menu item.
    If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
    If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
    (5) I do not use Skype oir Oovoo.  For those or other apps, see Help for each app for info on how to select your desired camera.
    Message was edited by: EZ Jim

  • Why wont google toolbar work with fire fox 5????? also how can i get firefox 4 back so i can use the toolbar???

    Hello,my question is why wont google toolbar work with firefox 5?????
    Also how can i get firefox 4 back so i can use the toolbar???

    This page is an easier way to download Firefox 4.0: http://www.mozilla.com/en-US/products/download.html?product=firefox-4.0&os=win&lang=en-US , as this links starts the download process asap.
    I needed to upgrade to Firefox 4.0+ for an add-on that I really needed. However, I can't use Firefox 5.0, as I randomly checked 3 add-on's I had: "Firefox PDF", "Delicious Bookmarks" and "After the Deadline", and none of them worked with Firefox 5.0. In fact, I will have to download alpha versions, etc., to get these add-ons to work with Firefox 4.0.

  • How to I get the built-in iSight camera to work?

    My built-in iSight camera is working but the "capture" button is greyed out and I can't record.

    Hi there,
    You may want to take a look at some for the troubleshooting steps found in the article below, specifically the section titled "Built-in iSight cameras"
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    Hope that helps,
    Griff W.

  • How do I use the built in web cam?

    I would like to start using the web cam on this TouchSmart 600 but I am not sure where to go or how to start.  Do I need to use a certain software or how can I get to it?   Thanks

    Hi,
    Please use this guide
      h10032.www1.hp.com/ctg/Manual/c01455314.pdf
    Merry Christmas.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I want to access my favorite site but your security alerts will not let me-how do I get your security to allow me to use my own computer as I want!!!

    eggcave.com is being blocked for my use due to badware-I trust this site and have clicked the appropriate button but the security is still blocking me.Turn this damn thing off NOW before my virtual eggs die as I ca't care for them-or tell me were and how to do it and I will. The site has already dealt with the advertiser that caused the alert!

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • How can I get into my phone if I cant use the touch screen?

    I went to go use my phone and when I attempted to get to the screen to type in my passcode, the area to swipe didnt work. The only feature that "works" is the little arrow on the bottom to get to the brightness feature, etc. I cannot turn my phone off manually or adjust anything on the screen itself. I cant even get to the emergency call screen. Im not sure if restoring the phone through itunes will delete anything I currently have on there... Please help!

    Hi eskimoerin,
    Thanks for visiting Apple Support Communities.
    If you have not already, first try resetting your iPhone using these steps:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the article with these steps here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the touchscreen is still unresponsive after your iPhone resets, use these steps to back up the data on the device and restore it using iTunes:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    All the best,
    Jeremy

  • How can i get information off of my flash drive using the iMac?

    when i insert the thumb drive in the computer, it doesnt recognize the new hardware. i also do not know how to open the flash drive manually. Please help!

    Godsblessings0625 wrote:
    i also do not know how to open the flash drive manually. Please help!
    Unless you are 100% sure about what you are doing, don't try to open a flash drive as it the best way of destroying it.

  • How can I get Flex to create a new email using the client's default that pre-fills a field?

    Assume that I have a String with some emails in it. When a user clicks on "Send Email to these People" I want their default email client (like Outlook or Thunderbird) to open up a window with new email ready to be composed. All I want is for the String's data to appear in the BCC (or Send To:) field of the email. Is there a mailing function (like the equivalent of PHP's mail()) that I can use for this? Thanks for any insight and help!

    Yeah, sorry about that. I remembered after I had already submitted this thread. I've just been so stressed out, little things like this didn't cross my mind. You can delete the other one if you are the admin here.

  • Bought a macbook, how can I use the built-in isight?

    Would anyone be able to give me advice on the above matter? As far as I found out I can take pics in photobooth, but are there other possibilities with the camera? I heard that you can videotape yourself also? (I am about to take an oral exam so I thought a little practice and see the presentation myself would help..)
    Thank you in advance and have a good weekend!
    renate

    Hi
    Start here http://www.ralphjohnsuk.dsl.pipex.com/EZJim/EZJimpage7.html
    Tony

  • I have a coleman Trek camcorder that creates AVI files, how can I get iMovie on my Macbook Pro to read these files?

    I have a Coleman TREK camcorder that creates AVI files, how can I get iMovie on my MacBook Pro to Read thes files?

    Try the following. there are others too
    https://itunes.apple.com/us/app/free-video-converter/id464195348?mt=12

  • IMovie 6.0.3 does not recognize built in iSight Camera on new iMac

    New iMac, Intel, OS 10.5.4, QT 7.5.
    Built in Camera works with Photo Booth, the new iMovie 7.1.3 and iChat.
    iMovie HD 6.0.3 or 6.0.4 does not recognize the camera. Opening a new project results in a No Camera Connected error. I have tried selecting various options in the video format drop down when creating a new project. I have repaired permissions, tried it under various users, removed the imovie plist, reinstalled imovie (both 6.0.3 and 6.0.4) without success. All 10 of the new computers are exhibiting this problem.
    Any help would be appreciated.

    That is not an option that I can select on the imac's. On my iBook under 10.5.4 with iMovie HD 6.0.3 or 6.0.4 I can click on the triangle next to the camera icon and select the built in iSight camera. On the new iMacs that does not work. The built in iSight is not listed as an option.

  • How Do I get OTN to recognise me as OCP and allow me to service requests?

    How Do I get OTN to recognise me as OCP and allow me to service requests?
    Thanks
    Mark Wagner

    Hi Mark, my problem is very similar. I have registered myself as Service Provider at the OCP member-only page, after it I have created my account on the ePeople site where I registered my certifications, but the status is "Pending".
    Does anybody know what to do?
    Mark, did you completed the first 2 steps that I mentioned?
    Thanks
    Gábor Cseresnyés
    [email protected]

  • I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?

    I'm using a mid 2014 13" rmbp. I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?

    It's something to do with the main user account (not iTunes account) on my Mac because I logged in with another account and it downloaded fine, I installed it on the HDD and even though the date in App Store was 16th October 2014, it is the full installer of 10.10.2.
    To try to resolve this problem, I have copied the installer app elsewhere and deleted it but App Store still will not allow me to download it with my main user account yet just allowed me to update iTunes.
    I had a brainwave last night that it might have been related to me changing the default downloads folder to one not on my boot drive (to save disk space on my main boot drive) but having changed it back, tried again, rebooted and tried yet again, deleted my App Store preferences. nothing has worked.

  • When I first turned on iMovie all videos from iPhoto automatically were found. Now I have more videos on iphoto, how do I get iMovie to find the new ones?

    When I first turned on iMovie all videos from iPhoto automatically were found. Now I have more videos on iphoto, how do I get iMovie to find the new ones?

    jtcollins wrote:
    if iMovie is open, connect your iPhone to comp. iMovie '11 will now find your phone and look for videos as it would if camera was connected
    (Underline is my emphasis)    
    Hi jt - Alex was actually referring to video clips in iPhoto not appearing in the item "iPhoto Videos" in the Events Library in iMovie - thanks for your post though (the 2 words are very similar).
    John

Maybe you are looking for