How do I get Import and File Format Documentation
I requested access to the CS2 SDK spcifically requesting that I wanted to create an Import or File Format plug-in but the documentation and the sample code is missing for those kinds plug-in types. Where can I find the documentation that I need to develop these plug-ins? Thanks. Rich
You'll have to request that separately (or again). Contact your ASN rep and tell him/her that you need access to Format and Import info. You should be sent (pending approval) the "Advanced SDK" via e-mail.
Similar Messages
-
Writing Import and FIle Format Plug-Ins for Photoshop CS1
Hi All,
I have written two plug-ins (Import and File Format) which work fine using CS2. Unfortunately we need to be able to have them work in CS1 too. I downed the "Adobe Photoshop CS SDK" but when when I looked at the API document ("Photoshop API Guide.pdf"), chapters 6 and 9 are missing and there is no sample code for these plug-in types.
Could anyone explain why this is?
How do I write these types of plug-in's for CS1?
Thanks for your Help
All the Best
DaveI have published
GPL source code to many plugins all of which are compatible with Photoshop 3.0 through CS2, on Windows and Mac. Unless you are using CS2 specific features, the your Import and Format DLLs should already work with CS on Windows.
On the Mac, the executable format changed between CS and CS2, and you would need to build a PEF plugin for CS. MPW and CodeWarrior can do that; Xcode cannot. -
How can I get Directory and Files from a Maped Networkdrive of the AppS
Hello,
we have the following Situation.
We have a Windows-Server (Server-A) in an Network with ActivDirectory and an Windows-Server (Server-B with an WebApplicationServer outside of these ActivDirectory as standalone.
On Server-B we mapped a Directory from Server-A (FileExplorer and then MapNetworkDrives) as Drive Q.
Now i tried to get the Directory of Q:\abcd but it doesn't work.
I tried the FM EPS_GET_DIRECTORY_LISTING and also RZL_READ_DIR, but both doesn't worked.
RZL_READ_DIR is doing a "CALL 'ALERTS' ..." and is comming back with sy-subrc = 1
EPS_GET_DIRECTORY_LISTING is doing a "CALL 'C_DIR_READ_FINISH'..." and comes back with "Wrong order of calls" in the Field file-errmsg. Next Call is "CALL 'C_DIR_READ_START'..." and this comes back with "opendir" in Field file-errmsg.
I tried the same with two Servers in the same ActivDirectory-Network. The Result was the same, i don't get the directory of the mapped drive. But now i get from the Call "CALL 'C_DIR_READ_START'..." the file-errmsg "opendir: Not a directory" and file-errno 20.
Is there any idea for solving my Problem?
I have to get this directory, read the files from the List and have to rename them after wriing the data to our databasefile.
I want to read them with OPEN DATASET, rename them by writing a new File (also OPEN DATASET) and after that i do an DELETE DATASET.
Thanks and Greetings Matthias
Edited by: Matthias Horstmann on Mar 25, 2009 4:12 PM
Filled in Scenario with 2 Servers in same AD-NetworkHalo Mattias,
i using this function get file file name and directory:
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
exporting
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE'
importing
file_name = p_file.
Rgds,
Wilibrodus -
I imported a minidv tape from camcorder. In the finder I see the files are .mov. Should they be .dv? What's the best way to maintain original quality?
on the clip info it says under codec: DV/DVCPRO-NTSC , Linear PCM..
Note: Earlier today I imported another clip and that one shows also as .mov but under codec info it shows H.264. I guess I changed the settings (mayby transcoded at import).
Anyway, I really only want to do this once and the top priority is retaining best possible quality. I don't care if it takes up a lot of space. Happy to get another drive.
Finally, you guys keep all the events on a separate external drive? That seems reasonable to me. How about the projects? I'm not sure if they take up a lot of disc space as well. I was under the impression projects do not.
ThanksGreat!
Thank you!
I already have some events and projects on the internal HDD. If I want to move it ALL to the external HDD is it still recommended to do that within FCP X (ather than moving the folders through the finder).
Also, if I import a lot of DV tapes (in full) is there any reason to also archive it for future needs. Seems that''s just a duplicate.
Finally, I am more familiar with iMovie 11 which really has all the editing capability I will need for my family videos. However, I'm trying out FCP X because of quality issues with minidv import in iMovie 11. I know this may seem strange to some, but is there a way to import minidv tapes to FCP X (o get the higher quality)and then work with those .mov files in the more familiar iMovie 11 or will I experience the same quality issues? -
How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?
skjeggi
What is this HDR-HS7E - a miniDV camcorder that lets you do DV and HDV capture firewire?
True, the DV and HDV capture firewire into the Premiere Elements 13 Capture window is gone. But, have you
looked at the workaround suggested by PRE_help in this forum. The workaround is found in the following
Adobe document....
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
When your schedule permits, please let us know if that worked for you.
Thank you.
ATR -
I accidentally deleted an Application on my iphone 5 and with it lost important files. How do i get back these files. The last iphone backup sync was after this so I cant even access an older back up as I cannot find them. How do I get back my Lost files.
On your iMac launch iTunes and at the top next to the Apple symbol click iTunes > Preferences > Devices and tell me what you see. You last sync should be there showing only a device name. If you have an older backup it will be there as well the difference is it will be the device name with a date and time stamp. Sync and backups are two different things and there is a chance iTunes made a backup the first time you hooked up your iPhone 5.
-
My webhost had me delete my ThunderBird POP3 account, and create a new ThunderBird IMAP account.
This took all my folders and files out of Thunderbird!!!
I know where all my folders and files are located on my hard drive.
How do I get my folders & files from my hard drive back to TB?
Any help will be much appreciated.
THANKS IN ADVANCE!
JeffWhen you delete a Pop mail account, it disappears from the Account Settings and Folder Pane, but fortunately it still exists in the Profile folder unless you had removed it.
Ideally, you should have moved all the emails into 'Local Folders' before removing the account.
You could use this addon tool to import messages into 'Local Folders' account.
'''ImportExportTools: '''
* https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/
Download the .xpi file and save to desktop or Downloads folder.
'''To install addon:'''
In Thunderbird
'Tools' > 'Addons' OR 'Menu icon' > 'Addons'
* click on the gear wheel icon and select 'Install addon from file'
* Locate and select the .xpi file you downloaded and click on 'Open'.
* After installing you will need to restart Thunderbird to activate.
In 'Local Folders' create some folders with suitable names.
Right click on folder > ImportExportTools
There are a couple of Options on importing
See image below as example aid. -
Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??
Trying to download photos from IPHONE, IPAD to IPHOTO in IMAC after installing new hard drive.
How did you import the photos to iPad and iPhone?
If the photos have been synced to the iPhone and iPad using iTunes, you cannot sync them back.
See this document: http://support.apple.com/kb/HT4236
You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
If your photos are not in the Camera Roll on your devices, save them to the Camera Roll, share them to the Photo Stream, mail the photos, or, if you have iPhoto on the devices, use iTunes Photo Sharing.
http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkee26bc1
Save photos to your computer using iTunes
Connect your iOS device to your computer.
Tap a photo, album, event, web journal, or slideshow and tap Share> iTunes.
Tap Selected, or change the photos you want to save (if you are saving a slideshow skip to step 4):
Select different photos: Tap Choose Photos, tap one or more photos, and tap Next.
Select a range of photos: Tap Choose Photos, tap Range, tap the first and last photos in the range, and tap Next.
Select all the photos in an album or event: Tap All.
In iTunes, click the button for your device and click Apps at the top of the window.
Below File Sharing, select iPhoto (in Apps).
Select the Shared Photos folder under iPhoto Documents.
Click Save To and select the location on your computer where you want to save the items.
To view your photos, go to the Finder and look in the location you selected above. -
Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV
You're welcome, and thank you for the reply.
2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
Thank's in advance again,
André -
Anyone know how I can get an audio file imported into my iTunes' podcast directory, rather than the music directory?
I downloaded a series of podcasts recently. They were imported into my "music" directory instead, making it more difficult for me to recall where I left off with the last podcast I listened to before having to stop it for whatever reason. Thanks in advance for any help.You can do it, though the result isn't ideal. Import your episode, then select it in the Music list and hit command-i to bring up the info panel:
However each episode you do this with will turn up as a 'podcast' with no name - and it doesn't seem possible to give it one - containing the one episode: -
I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?
If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library -
I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?
Connect phone to computer.
Select Restore.
Tell iTunes which of the available backup files to use, let iTunes restore it.
Also, try reading the User's Guide as it answers questions like this. -
How to I get multipage pdf file placed in my document to conform to the document that I set up? I have InDesign cc and the pdf pages are placed outside of my document?
Hi Rave,
InDesign cc couldn't open the script, I get an error message that it is not a supported file type. I tried this first before using the "place multipage pdf" in my InDesign document. The script which comes with InDesign cc works, but places the pages outside of the document. That's what I'm trying to figure out how to do. I had no trouble doing this in PageMaker 15 years ago. I don't know why it doesn't work on my computer??
Thanks,
Yerbamansa -
Hi,I have restored my iPhone 4s and i forgot to backup it before restore,so I haven't a backup.How can I get back my files from my iPhone??
One day this was happened to me:I deleted some videos that i don't need and after about a month i went to a music concert and i recorded with my iPhone for about 25-30 min and my iphone froze and automacitly restarted after a restart when a went home and i wanted to watch what i had recorded and in my camera roll on my iphone i saw the videos that i deleted about a month ago!!! With this fact i think that the videos aren't deleted they are somewhere i would pay how much is needed to get the videos and photos back .So please someone who knows something about this HELP ME PLEASE !!!!
-
How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?
Thank you.dadanas wrote:
Hi Simcah, I have a similar problem. Have you found out any solution?
thanks, dan
You need to ask the printing service provider. Dealing with color totally depends on the printing process involved and of course the machines used.
Maybe you are looking for
-
Intercompany transactions in R12?
Dear all, I have a real case like this, we have 2 companies and the COA is simple segments (company, cost center, account and inter-company). There are 2 companies ( Company A and Company B), both companies are using internet services provided by the
-
How can one keep a history of PL/SQL code changes?
Hello All, I am trying to execute the following code found at http://www.orafaq.com/faqplsql.htm#HIST CREATE OR REPLACE TRIGGER change_hist -- Store code in hist table AFTER CREATE ON OPERADWOWNER.SCHEMA -- Change SCOTT to your schema name DECLARE BE
-
Some Search Admin Pages Causing Exception 0x80131904
I have a SharePoint 2013 Farm with multiple servers, though most applications, services and sites currently run on the main Front-End system. I have been tasked with re-building the Search Architecture, so as to distribute search components across so
-
Whats wrong with the following code?
if currencyName =( "Euros" ) amount = amount * 1.02; else if currencyName =( "Yen" ) amount = amount * 1.20; else if currencyName =( "Pesos" ) amount = amount * 10;I get error that a ( is needed I tried the f
-
Cannot open PDF in Modal window
Hi, I am trying to execute the reports and open the pdf file in a showModalDialog window, but I get only blank screen. Basically, I want to open the PDF in modal window so that the URL value is not stored or displayed in the screen.. Is there any set