How do I get internet to work on ibook G3?

I have an ibook G3. I'm trying to connect to the internet via DSL cable. (I have an airport extreme, but no airport card in my G3, which is why I connect with cable.)
When I plug in the ethernet cord, the internet does not work. How do I get my internet to work?
(I also have a newer Mac that works both wirelessly from the Airport Extreme and directly from the DSL.)
I've forgotten how to configure for the ibook (it's old!) - I have Mac OS X 10.2.8 on it right now.

This link should help you. http://support.apple.com/kb/HT1714

Similar Messages

  • How do I get Internet access on my ibook G3?

    I just got my cousin's old laptop. He had his own seperate phone line for it but I can't afford that. Can I share the Internet from my computer at home(which is a Compaq with Windows XP) with my laptop? I have the mushroom looking product and the cables for it but I don't know how to get my laptop onto the internet. My laptop has an airport card in it also. How can I get my laptop to pick up the signal and get onto the internet? A quick response would be much appreciated. Also let me know if my question is not clear enough.

    Hi, and welcome to Apple Discussions.
    How does your other computer connect to the internet? Is it dial up (a phone line)? What is the "mushroom looking product"? Does it have a name on it? And a model number?
    To use an AirPort card to get on the internet, you will need a wireless router or a wireless access point.

  • When i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

    when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

    you may be connected to the wireless network but the question is the internet working properly on the wireless network...
    what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues.

  • I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired.  Is this possible and how to I get them to work together?

    I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired.  Is this possible and how to I get them to work together?
    How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
    Frank

    Thanks for the info, this really helps.
    Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
    It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
    Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on  AirPort Extreme.
    The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
    AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
    Enter a device name that you want to use for the Extreme and click Next
    Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
    You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

  • How do I get fios to work with my new desktop w/ Windows Media Center

    Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
    also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
    ** computer specs**
    Product number NZ017AA
    Introduction date 30-Jun-2009
    Country/region sold in: United States,Canada
    Hardware Base processor
    Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
    Chipset AMD 780G
    Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
    Power supply 300W
    Memory
    Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
    4 GB* (4 x 1 GB) (32-bit OS)
    *Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
    Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
    Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
    This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
    Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
    Wireless Wireless LAN 802.11 b/g
    Video Graphics Radeon HD4350
    512 MB DDR2 memory
    I/O Ports: HDMI, VGA, single-link DVI
    Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
    Sound/Audio High Definition 8-channel audio
    ALC 888S chipset
    Network (LAN) Integrated 10/100/1000 Base-T networking interface
    Memory card reader
    Contains an Infrared receiver for remote control
    Supports the following cards:
    Compact Flash I
    Compact Flash II
    IBM Microdrive
    Secure Digital (SD)
    mini-SD
    MultiMediaCard (MMC)
    Reduced size MultiMediaCard (RS-MMC)
    MultiMediaCard Plus (MMC plus)
    MultiMediaCard Mobile (MMC mobile)
    Memory Stick
    Memory Stick Pro
    Memory Stick Duo
    Memory Stick Pro Duo
    SmartMedia
    xD Picture Card (xD = extreme digital)
    External I/O ports
    I/O ports on the front panel
    Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
    I/O ports on the back panel
    Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
    Expansion slots
    Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
    Drive bays
    Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
    Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
    Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

    Based on what you've posted, your computer does not have the right tuner.   You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
    QAM tuners to record local channels only
    This requires Windows Vista or Windows 7
    Hauppauge WinTV-HVR-2250
    SiliconDust HDHomeRun (info on a sale)
    CableCard tuner to record local and cable channels
    This requires Windows 7 + one CableCard from Verizon for $3.99/mo
    ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
    Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
    Make sure your computer has Windows 7 Home Premium (or better) installed.   That's necessary to support CableCard tuners.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

  • The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that  wifi network

    The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you

    I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you

    You need a computer with iTunes and an internet connection
    Try:
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              

  • Can't get internet to work on my formated Satellite A100

    Hey,
    I recently formated my computer and then I installed all the drivers that i needed for my A100 PSAA9... but internet wont work... i kinda understand why but don't know what to do about it....
    if i'm not unentierly mistaken the driver needed to get internet to work with my adsl is the LAN driver, no?
    Well i downloaded that one but when i tried to install it there was no setup file or installation file only an uninstall file... unfortunately for me i managed to click that one a bit too fast without checking what it was now, that leaves me with 2 questions:
    Are the LAN drivers pre'installed with windows so that internet can work from the start?
    How do i do then if this is not the case to get internet working?
    All help is much appreciated, thanks on beforehand Maxime Maison

    Hey, thanks for all the advice so far!!! I googled the device manager and figured out what it was :P problem is i have my OS in swedish so it's different...'
    anyway, I did what you said but i still doesn't work.. i don't know if there is something else but i'll provide details so you can tell me if i did something wrong:
    I enter the device manager, I expand net adapters and i get 1 option called: 1394 Net Adapter I click update drivers and get the options that you posted above. When I click the don't seach i'll choose myself part i get the 1394 net adapter in a little box displayed as net adapters and i can either click "floppy exists" or click previous, next or cancel nothing where i can choose to click the unzipped driver i downloaded. I click next and the says that the software has been installed for the 1394 Net Adapter and then i click finish.
    This might mean that the driver was installed all along i don't know but internet still won't work so i don't know what to do and until you showed me all of this i had done nothing else but the first time i did it, nothing seemed to have changed....
    i wish it could just fix itself :(

  • How can I get iCloud to work on my IMac?

    I have an IMac, iPhone and now a MacBook. I have iCloud working on my MacBook and iPhone. How can I get it to work on my iMac 27" Both computers have Lion for the OS. Blessings...

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • How do i get internet explorer on my iMac

    how do i get internet explorer on my iMac

    If all you want  to do is use IE because some sites insists on it then what is suggested above may work, i.e, change the user agent to make the site think you are using IE.  Most browsers support that feature either directly as in Safari or with add-on/extensions.  The only things that may go wrong is some drawing or a few other things may not work properly  if the site uses some non-standard IE-only html conventions.  My opinion of that is if a web site is going to take that kind of windows-centric attitude in this day and age of multiple browsers then screw 'em.

  • Where/How do I get Internet Explorer for MAC OS 10.8.2?

    Where/How do I get Internet Explorer for MAC OS 10.8.2?

    Unfortunately no, you can make a change in Safari to allow it to appear to be IE to the website but if any Windows specific services (such as Active X) are needed it still won't work.
    If you absolutely must have IE you should install Windows, preferably in a Virtual Machine, like Parallels.

  • After downloading Flash 9, how do you get it to work with Apple iMac OS X 10.3.9 ?...

    a.
    After downloading Flash 9, how do you get it to work with Apple iMac OS X 10.3.9 ?...
    b. , c.
    What's the best browser to try?... Firefox?... Opera?...
    Why?...
    d.
    What directory/ies contain the downloaded Flash 9 files?...

    a. Your browser and the flash player should work together. You should not have to do any thing
    b. Camino is the best for 10.3.9 Why? You can access apples me.com through Camino on 10.3.9 but Safari will not work with me.com. Also all the internet plug ins work with camino
    c. hard disk - library - internet plug ins

  • How do I get internet explorer

    How do I get internet explorer for MAC.  I am only able to access a military site for work via IE.

    IE for Mac hasn't existed since OS9 days.  I think there are some browsers that will fake their identity, telling web sites that they are IE when they are really something else.  The site may then work providing it doesn't really, really need IE.  I don't have a list in front of me but browse the web for something like browser emulation (user agent).
    Here's an older tip for Safari
    http://forums.macnn.com/82/applications/358328/safari-emulating-ie/
    and Firefox
    http://www.mydigitallife.info/changing-user-agent-for-firefox-web-browser/
    Message was edited by: Limnos

  • After downloading Flash 9, how do you get it to work with OS X 10.3.9 ?...

    a.
    After downloading Flash 9, how do you get it to work with OS X 10.3.9 ?...
    b. , c.
    What's the best browser to try?... Firefox?... Opera?...
    Why?...
    d.
    What directory/ies contain the downloaded Flash 9 files?...

    a. Your browser and the flash player should work together. You should not have to do any thing
    b. Camino is the best for 10.3.9 Why? You can access apples me.com through Camino on 10.3.9 but Safari will not work with me.com. Also all the internet plug ins work with camino
    c. hard disk - library - internet plug ins

  • How will i get internet on ipad

    how will i get internet on my ipad4 in india without wifi...india doesnt have 4g so ihope it works on 3g..do i have to buy a local micro sim and is it avilable there.

    Authorize the computer in iTunes -- Store>Authorizie this computer.  Transfer the purchases from the iPad into iTunes and then you can sync with iTunes. Read this for instructions on transferring purchases from the iPad into iTunes.
    Transfer purchases.
    http://support.apple.com/kb/HT1848

Maybe you are looking for

  • How do I access my stored organized albums from another pc?

    Hi  How or is it possible to access my organised photo albums on one pc from another pc keeping the albums and category names intact ?

  • Rating songs and playlists help

    Hi, I've just got a I Pod Nano. I know how to rate the songs using the stars. But was wondering if I can then make the i pod play the songs that I've rated as good. I like to organise my i pod in terms of album and artists (I make a new playlist for

  • MUSE Contenu site adapté à la fenêtre du navigateur

    Bonjour, Je me suis lancée en créa de site avec Adobe Muse CC et... j'ai un petit problème ! Je souhaite en fait que le contenu de mon site d'adapte à la page du navigateur du visiteur, sans bandes verticales à gauche et à droite du contenu. J'aimera

  • Pictures black when return to a viewed page.

    After choosing a link from a Web page and viewing that link, I return to the previous page and all the pictures that were displayed on the page are black. Only way to show pictures again is to refresh the whole page. This issue started after the last

  • How to read Java Object message from JMS Queue using JMS Adapter .

    Dear All, In my scenario i have to read a java object message from JMS Queue . I tried by using the JMS Adaper ,but i am not getting any Payload . Can any one tell me is there any special settings for JMS Adapter to read the Java Object message . I a