How do I get into a disabled phone If the code has been forgotten?

My son changed his code to keep his brother out, and either enteres it wrong or is remembering it incorrectly.
I have never had to deal with this before and I'm not sure what to do.
He tried multiple codes and is now locked out for 60 minutes.
How many times can you even try?
The device is a new iphone 5 and hasn;t yet been synced to itunes.
What's next?
Thanks
Jen

http://support.apple.com/kb/ht1212

Similar Messages

HT1414 I loss my iphone 4, got a iphone 5 and try to restore the iphone info from my laptop. But the itune requires a password, which I forgot (I set this up two years ago!). How can I get into my itune to restore the iphone info.

I lost my iphone 4, got a iphone 5 and try to restore the iphone info from my laptop. But the itune requires a password, which I forgot (I set this up two years ago!). How can I get into my itune to restore the iphone info.

Go to appleid.apple.com and try to login there. If unsuccessful, there is a link to change your password.

How do i get back my stateful session bean after it has been passivated

hi ,
How do i get back my stateful session bean after it has been passivated by container.
i'm confused that is it possible or not .......give me answer
i've one stateful sessionbean which i'm accessing throgh my normal java client . now what i'm doing is when i first time call a method it is running ......then i'm shutting down the server jboss .......it is calling my ejbPassivate() method ... at this particular time client program doesn't do anything.....
now after i restart my server i'm again calling back that business method with that last object reference.......it gives me the exception given below.....
java.rmi.NoSuchObjectException: no such object in table
java.rmi.NoSuchObjectException: no such object in table
     at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
     at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
     at sun.rmi.server.UnicastRef.invoke(Unknown Source)
     at org.jboss.invocation.jrmp.server.JRMPInvoker_Stub.invoke(Unknown Source)
     at org.jboss.invocation.jrmp.interfaces.JRMPInvokerProxy.invoke(JRMPInvokerProxy.java:118)
     at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerInterceptor.java:227)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:167)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:46)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:55)
     at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSessionInterceptor.java:106)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:86)
     at $Proxy1.makeNewAcc(Unknown Source)
     at client.GanJavaClient.main(GanJavaClient.java:46)so pls tell me that is it possible to get back that session besn or not

Stateful session beans are not persisted across restart of the EJB server instance(s) hosting them. You can't treat a Session bean as one would an entity bean.
Chuck

How do I get confirmation that an email I've sent has been received by the recipient?

How do I get confirmation that an email I've sent has been received? I am using OS X 10.7.5.

Not sure if this will work with your release of Mac OS X and Mail but some Google search for "Mac OS X Return Receipts" turned up this:
<http://email.about.com/od/macosxmailtips/qt/et_request_recp.htm>

How can I uninstall Trend Micro Safe Surfing once the app has been deleted from my Mac OS X?

How can I uninstall Trend Micro Safe Surfing once the app has been deleted from my Mac OS X?

Check to see if there's such a folder as either
/Library/Application Support/Trend Micro
~/Library/Application Support/Trend Micro
and if so, see if either contains an uninstaller.
Failing that, download the demo version of the app from Trend Micro, and try the uninstaller that it should contain.
If all else fails, the manual way would be to use something like EasyFind and search for anything with "com.trendmicro" in the filename (you can use Finder, but be sure to include system files and invisible files in the search options). Pay particular attention to the folders
/Library/LaunchAgents
/Library/LaunchDaemons
~/Library/LaunchAgents
~/Library/Internet Plug-Ins
~/Library/Preferences

How can i get into a disabled ipod touch

My sister in law gave me her ipod but its disabled and i cant get into it and i dont have a computer with itunes is there anyway to unlock the ipod?

Only if:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Otherwise you need a computer with iTunes and an internet connection
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

HT1766 How do I get my iPod to work again after is has been disabled because I forgot my password & now I remember it?

My iPod Touch has been disabled because I had forgotten the password. Now I remember the password but can't get the iPod unlocked. I am hooked up to iTunes but can't get it unlock still? What am I doing wwrong????/

1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

How do i get into my ipad 4 without restoring because i have forgotten my password

how do i unlock my password protected ios 7 iPad 4 without restoring it

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How can I delay my MBP from hibernating until the lid has been closed for a set period of time?

After extensive research, I have been unable to solve this problem and I'm hoping someone can explain this to me.   Everytime I close the lid on my 13-inch, Early 2011 Macbook Pro, it immediately starts to write to disk (solid light on the front) for several seconds until it finally goes into Hibernate mode (flashing light on the front). The problem is, I frequently close the lid, then immediately reopen it within 15-30 seconds to resume typing or to add something I may have forgotten.   Each time I reopen the lid before the light has started flashing, the MBP wakes for a moment, and allows me to resume typing. However, the Hibernation process has already begun and within 30 seconds, the screen goes blank.   I have to wake it AGAIN, which is very annoying.
Based on my research, I could use pmset to change the hibernatemode to 0 (it is currently set at 3).   However, I dont wish to disable hibernate mode completely; I DO want it to save a hibernation image to disk if it happens to run out of battery, so that when I resume I havent lost anything.
I then researched using standby and standbydelay to attempt a delay of the write to disk when going into standby mode.   According to the pmset manual:
standby causes kernel power management to automatically hibernate a machine after it has slept for a
     specified time period. This saves power while asleep
standbydelay specifies the delay, in seconds, before writing the hibernation image to disk and powering
     off memory for Standby
I then set these values as below, expecting the laptop to wait 4200 seconds (70 minutes) before trying to write to disk when I close the lid:
standbydelay         4200
standby              1
Unfortunately, that did not work either.   If I close the lid, the light glows solid immediately (indicating it is writing to disk), and if I try to reopen the lid before it is done, it will wake and seem fine, then 30 seconds later it goes blank right in the middle of me typing something.   I usually have to click the mouse several times, or even the power button to re-wake it.
I do have InsomniaX installed, for when I want to close the lid and keep the machine awake permanently (while watching videos on airplay) and I have tried quitting that application to test this. However, when I close/reopen the lid..the result is the same.   I cant keep InsomniaX enabled all the time, because it will never go to sleep when I truly want it to.   If I am not using InsomniaX, I just want to delay hibernation until he lid has been closed for a set period (say 15 minutes or more). If I have not reopened the lid within that time, I want it to write to disk and go into hibernation mode. And if the battery runs all the way out, I want it to go into hibernation mode before shutting down so I can recover.
I would appreciate any help in solving this problem. Also any insight as to why the standbydelay setting above did not work.   Thanks!

Whats with the MBP lid? Dont close it ... if you're so concerned! Just go to System Preferences/Energy Saver and set it to how you like it.

How do I get my music back from a computer which has been recently serviced. I am able to log into my itunes account but lost half of my library which was music I imported originally.

I need help. I recently had my cpu serviced by Geek Squad, They completely renamed the CPU and now all of the music I imported is gone. I dont even have my library anymore. I can usually click on itunes and play music from my library. Its all gone. I have authorized this "new" computer for my account but I still dont have my library. I even went in and deauthorized the computer under the old name. I am very frustrated, as i have some songs which were purchased on itunes on my phone but not all of the music that was imported from CDs. Most of which I got rid of once I imported them into my library. all I want is my entire library back. On my old iphone 3g, which I let my kids use, my entire library is there but on my 4gS, i only have the music which was purchased through itunes. I miss my songs and have no idea where to begin with this process.

Your music will only be where you put it.
It has always been very basic to always maintain a backup cop of your computer.
Certainly you did not have our computer serviced without making sure your backup copy was up to date.
In some countries you can redownload some content:
Downloading past purchases from the App Store, iBookstore, and ...

HT1349 my daughters cousin gave her her old ipod. it is locked and we cant get into it tiffany doesnt remember the code anyone know what to do bout it how do i unlock it

my daughters cousin gave her an ipod and it has a lock code on it and she doesnt remember the lock code i cant get itunes to do anything with it i need help

Connect the Device to iTunes... open iTunes, click on the Device tab that appears in the Left side column of iTunes, Select your Device, then go to the Summary Page and click Restore.
If necessary Place the Device into Recovery mode...
See Here...
http://support.apple.com/kb/HT1808

HT201274 I forgot my unlock password and i need to know how i can get into my ipod without having the password ( THIS REALLY IS MY IPOD, NOT A STOLEN ONE THAT SOMEONE WANTS TO GET INTO!!! )

HELPPPPPP!!!!!!!!!!! PLEASE!

What to Do If You've Forgotten Your iPhone's Passcode
Restoring iPod touch after forgotten passcode
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

HT1414 How can I get into my daughters iPod 5 when she has forgot the code?

I have tried this and when the process is finished all is restored and as I started.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

HT4623 How do I get back to Setup Assistant after the settings have been entered? I need to get back to Setup Assistant to back up the data that was on my iphone 4S to my new 5S

I purchased a new iphone 5s yesterday from Verizon. They had a problem setting it up. They went through Setup Assistant setting up the phone. They could not get my back up I had on iCloud, so they just skipped it. Now I do now have all my apps or other data.
I have been doing some reading and it said to go back to Setup Assistant. I can't firgure out how to do that.
Can anyone help me?

Are you wanting to restore from your backup? IF so, go to settings - general - reset - erase all contents or settings this will wipe yoru phone clean, then you'll get the option to restore from backup.

How can I get my music back if my Apple ID has been changed

My music isn't popping up. Apple said I owe money that I tried paying it didn't work so I made a new ID! I need help I payed for 123 songs!

You pay what you owe. If you're having a problem doing that, you call iTunes store support and you make arrangements to settle your debt.
Of course, if you had it in the iTunes library on your computer, it wouldn't be a problem...

How do I get into a disabled phone If the code has been forgotten?

Similar Messages

Maybe you are looking for