How do i get into my phone if i have forgotten my passcode

I have chnaged my passcode on my phone and I cannot remember it, what should i do?

If you cannot remember the passcode for the Screen Lock, you will need to Restore the device...
1)  Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
2)  If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

Similar Messages

  • HT4623 how can I get into my Ipad when I have forgotten my passcode

    Someone in the family has changed the passcode to my Ipad - It could have been me - but no one remembers doing it. We are now locked out of the Ipad. How can I get back in!

    Connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808

  • How can i get inot my phone if i have forgotten my password in?

    I've forgotten my password into my iPhone 3GS. Any way of me getting in to my phone to change it?

    If you have a passcode to the screen lock that you've forgotten, restore the iPhone from the computer to which the iPhone is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the iPhone into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    If that still doesn't work, as a last resort try DFU mode:
    http://www.iclarified.com/entry/index.php?enid=1034
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • My iphone4's battery went dead and when I put it on charge it asked for itunes.  I dont have my macbook at the moment and I am worried I may loose content.  Any suggestions how I can get into my phone?

    My iphone4's battery went dead and when I put it on charge it asked for itunes.  I dont have my macbook at the moment and I am worried I may loose content.  Any suggestions how I can get into my phone?

    Copy the iTunes folder from the disk to the Mac, and the iPhone backup to the right place on the Mac (Google for "iphone backup location"). Then when you restore you can reload the last backup.

  • TS2734 Passcode has been forgotten...How can I get into the phone?

    Help!  My passcode has ben lost/forgotten....How can I get into the phone?

    Try this
    http://support.apple.com/kb/HT1212

  • HT1212 My iPhone has been disabled because of a forgotten passcode how can I get into my phone

    My iPhone has been locked because I forgot my passcode.   How can I get into my phone?

    Restore it as explained in the article you were just reading.  If you're running iOS 7 with Find My iPhone enabled, you'll have to force it into recovery mode in order to restore it (see http://support.apple.com/kb/ht1808).

  • Forgot my 4 number passcode... how can i get into my phone?

    how can i get into my phone or reset it if i forgot the 4 number passcode?

    http://support.apple.com/kb/ht1212

  • HT4113 how do i get into my phone while its disabled through iclouds

    my iphone is disabled and my computer will not download itunes how can i get into my phone r wipe it through iclouds r with my apple id

    Go to https://icloud.com/find and log in with your Apple ID.

  • How to get into my iPhone5 if I have forgotten my password, How to get into my iPhone5 if I have forgotten my password

    How to get into my phone if I forgot my password

    LOST PASSCODE
    You should be able to remove the passcode by restoring the device.
    Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
    Right-click the device in the left column and select Back up.
    When the backup is complete, select Restore.
    When finished, restore from your most recent backup.
    Otherwise read this
    If that doesn’t work  you will need to perform a factory restore to remove it. Or read:
    Enter Wrong passcode
    http://support.apple.com/kb/ht1212

  • How can I get into my i-pod if i forgot the passcode?

    How can I get into my i-pod if i forgot the passcode?

    connect your ipod to your mac and the summary page on itunes will show up. On the middle of the page it will say restore, click on it follow the prompts and you should be good:)

  • How can i open my iphone 4s when i have forgotten my passcode ? without deleting everything on it

    how can i open my iphone 4s when i have forgotten my passcode ? without deleting everything on it

    Put it in recovery mode to restore, you'll get the option to reset the passcode during this process.
    iOS: Wrong passcode results in red disabled screenand iOS: Recovery mode
    If you have previously synced your device with iTunes
    You may be able to reset the passcode by restoring the device.
    Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
    Right-click the device in the left column and select Back up.
    When the backup is complete, select Restore.
    When finished, restore from your most recent backup.
    If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.
    Message was edited by: Ingo2711

  • How do I enable my ipod touch if I have forgotten my passcode?

    How can I enable my ipod touch if I have forgotten my passcode?  I can't restore it from itunes because it is locked.

    Hold down the sleep/off button for three seconds. Then keep holding it, and push the home button and old both for 10 seconds. The screen should go black about 6 seconds into that. After that, let go of the sleep button and keep holding the home button for 10 seconds. This will force the iPod into DFU mode, and you can restore it in iTunes. If at first you don't succeed, try again, because the timing can be tricky.

  • HT4061 I locked myself out of my phone and am out of the country without access to a computer only an iPad to email and access iCloud  how can I get into my phone

    I locked myself out of my phone and am out of the country without access to a computer only an iPad to email and access iCloud  how can I get into my phone

    Hi Myreiac,
    Here's what the Apple Support site says you can do if you do not have access to a computer when your device has been disabled:
    If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.
    You can access Find My iPhone via the Find My iPhone app on your iPad.
    Good luck!
    Cheers,
    GB

  • Today in class someone put a password on my phone and i don't know what it is. How do i get into my phone?

    today in class someone got in my phone and changed the password on it. i don't know what it is, so i have no way of getting into my phone. does anyone know a way i could get into it without knowing the passcode?

    See this thread: https://discussions.apple.com/message/17811499#17811499

  • HT4865 How do I get into my phone when it wont recognize the password?

    My iphone will not recognize the password and keeps locking me out of my phone???
    Plus it has other languages coming up as well.

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

Maybe you are looking for

  • VPRS cost not flowing when plant is changed

    Hi all, I have a scnenario where : 1. The customer places an order to a Sales org 1000 whose company code is 1000. 2. The goods are to be delivered from plant 2000 which belongs to company code 2000 3. Material X is present in Plant 1000 and has been

  • How to save custom metadata display in CS4.2?

    I know this has been asked in the past, but no one has come up with an answer I can find. Here's what happens: in the project bin, I click Metadata Display, click the Premiere Project Metadata line, unclick the metadata I don't want to see, save the

  • XML Report not working

    Hi All, I developed a xml report but it is throwing below error..please help.. the log details are below Shipping Execution: Version : 12.0.0 Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved. XXTEST_XML module: XXTEST1 Current system

  • Java beans + jsp

    From a jsp I can use the setProperty property="*" method of java beans to set all the properties in a java bean, where each property has a corresponding element in the jsp page. How do I set the property of a java bean where I have the type of jsp co

  • Group by and decode function

    Can I use a group by on a decode? I am using the sql below and get an error message when I try to use the group by on a decode. select decode(assignment.catcodeid, 'D', 'SERVICE REQUESTS AND MAINTENANCE', 'U', 'SERVICE REQUESTS AND MAINTENANCE', 'P',