How do I get ipackets and opackets statistics for logical network interface
I do a kstat_lookup() and kstat_read() to get the ipackets and opackets statisti
for the physical network interfaces like hme0.
However those statistics are not available via kstat for logical interfaces such
as hme0:1.
I notice that netstat -ai reports numbers for ipackets and opackets for
logical network interfaces so that information must be available
programatically but where?
netstat(1M) uses private ioctl(2) calls to a prepared /dev/arp to extract SNMP MIBs
that contain this information. I agree that it should be published via the kstat interfaces
as well.
- Stephen
Stephen Hahn, PhD Solaris Kernel Development, Sun Microsystems
[email protected]
Similar Messages
-
How can I get my phone to search for the network
I have a BB 8310 Curve, my issue I have is that I work in an area that I dont get cell service until I get outside (very thick dense walls) so while I am down here, my BB basically gives up searching for a network. When I go outside it takes a long time for it to search for a network again, unless I power it off and power it on again.
Does anyone know of an easy way to make it start the network search again?
Thanks
GarthSome carriers lock this down so it may not be available for you.
But try it out.
Options> Mobile network
Scroll down and change selection mode to manual, it will scan for networks manually. . . .Quite honestly you are best of just turning the device off and on, or just turning the mobile network off/on -
How Can I get read and write permission for NTFS formatted external Hard Drive?
How can I use my external formatted disk on MAC with full permissions?
Install software such as Paragon NTFS on the computer.
(63161) -
How can pkg-get resolve and install dependancies for a selected package?
Hi all,
i am using pkg-get for installing phpmyadmin an a solaris 10 os.
when i do "pkg-get -i phpmyadmin", hi try to install apache2 but he cannot because he don't want to install the dependancies for his package
-bash-3.00# pkg-get -i phpmyadmin
WARNING: gpg not found
No existing install of CSWphpmyadmin found. Installing...
Pre-existing local file phpmyadmin-3.1.2,REV=2009.02.27-SunOS5.8-all-CSW.pkg.gz matches checksum
Keeping existing file
Analysing special files...
Trying to install dependancy apache2
No existing install of CSWapache2 found. Installing...
Pre-existing local file apache2-2.2.11,REV=2009.03.29-SunOS5.8-all-CSW.pkg.gz matches checksum
Keeping existing file
Analysing special files...
Trying to install dependancy apache2c
Error: dependancies for apache2c not up to date.
You may call pkg-get again with '-v -u apache2c' to see which ones
Or, call pkg-get with 'upgrade all' to bring all installed pkgs up to date
ERROR: install of CSWapache2c failed
ERROR: could not install required dependancies for CSWapache2
Once dependancies are up to date, call
/opt/csw/bin/pkg-get -i apache2
to (re)install
ERROR: install of CSWapache2 failed
ERROR: could not install required dependancies for CSWphpmyadmin
Once dependancies are up to date, call
/opt/csw/bin/pkg-get -i phpmyadmin
to (re)installif i want to install apache2c, he don't want, because he don't have the dependancies, etc....it's infernal, i try "pkg-get -u" for upgrade all package, but it's don't resolve any thing.....
have we a way for configuring pkg-get for installing the dependancies by himself? (like apt-get)
another pb : when i try to install one of the dependancies, i have the messsage "Les conventions d'administration syst�me n'autorisent la cr�ation que
d'une seule copie du module <CSWggettextrt>. Or, le nombre maximal de
copies de module admis en m�me temps et sur le m�me syst�me est d�j
atteint.
"sorry it's in french but it said that he don't want to install the package because "the system administrattion convention allow only one copy of the package", it is because it's already installed?
thank for your help....Hi
For the last problem, what does
pkginfo | grep gettext
show?
Paul -
How do you get L and R Wavs for mastering?
Greetings all,
My friend works in a recording studio and offered to do some discounted mastering for my tracks that I did.. The only thing he wanted was each project bounced to L and R wavs... I've looked around on and it looks like this is actually something that people do -- its common in ProTools. Anyone know a way for me to do this or something similar??
Thanks!!!Me too. We want to mix my Garage band tracks with pro tools
-
How to I get the Keyboard Plug In for Logic that includes the B3 Hammond Organ?
I just downloaded Logic Pro X, along with all the additonal instruments, but I can't seem to find any of the keyboard plug ins that I thought came with it. I'm really interrested in the B3 Hammond Organ plug in. How to do I get that? Can anyone help me?
Thank you!Search for Organ patches, the instrument used is named "Vintage B3 Organ"
-
How do I get Lion to stop asking for a network server?
Hi all,
I keep getting a very annoying message after upgrading to Lion.
The message is: "there was a problem connecting to the server POZ.local"
It does not make any difference if the server is up, running and connected to the network either.
What can I do to get rid of this irritating dialogue box?
Thanks in advance all!
PatrikI have the same problem. I suspect it has something to do with the versioning function, as it only seems to happen when I have a document open that I have made a change to. In my case it's asking for my NAS. Sorry I can't be more help.
Regards,
Fiver -
Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008 -
Before installing 4.0.1 I could right click on the Firefox icon on my computer's taskbar and hit close window. It would then give me the option to "save tabs and quit" or "close all tabs."
Now it just alerts me that I'll be closing multiple tabs.
It was convenient to be able to close Firefox and open it with all of the tabs in place. There is nothing more irritating than having multiple tabs lost because your computer did an update overnight and restarted. Also it was helpful when you wanted to run a tun-up or cleaner that asked you close out of your browser for optimum result's.
How do I get "save and quit" back?
ThanksFirefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time" -
How do I get superscript and subscript on iPad? I have notability keynote and pages.
How do I get superscript and subscript keys. I have pages notability and keynote.
If you move to iOS 8 you can use keyboard extensions. For instance, I have an extension, Chemistry Keyboard, in the App Store that allows this, and there may be others.
-
How do I get games and music on my phone from iTunes
How do I get games and music on my phone from iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/ -
How di i get Facebook and skype in my iphone?
how do i get facebook and skype in my iphone4
go to the appstore and download it for free on your iphone
-
How do I get email and text message notifications when my phone is locked?
How do I get email and text message banner notifications on my iphone when the phone is locked? When I had iOS 6 I could get notifications with sound and banner. Now that I have iOS7 I can't see notificaitons when the phone is locked.
See if this support document about Notifications helps. http://support.apple.com/kb/HT3576
-
Kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 3/4/2009)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
See bottom section on AIM 6.5 and 6.8 on XP and Vista.
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or receiving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ability to start either an Audio or Video chat from one end to a recipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this.
Between both of you.
At least one camera (Mac end works better)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to video chat One Way but sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the paragraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
PC end gets AIM 5.9 or Trillian Pro.
The PC end allows the app through the XP Firewall.
AIM 5.9 needs "Tuning" to Camera and Mic.
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) One-Way.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable to AIM 5.9.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
<hr>
AIM 6.5 and 6.8 On Vista and XP
AIM 5.9 or earlier can not be installed on Vista.
AIM 6.5 and 6.8 use a new video codec with a description of "Real Time IM"
AIM have an FAQ page about this
Below the pics is this quote
What do I need to use Real-Time IM?
You and your buddy need to be using AIM® 6.8 or higher to use Real-Time IM. Unfortunately, Real-Time IM does not yet work with older AIM clients, iChat®, or AIM® for Mac®.
See items 5 through 13 on this page for alternatives including Web Browser based ones.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
This is the 2nd version of this tip. It was submitted on Saturday; April 4, 2009, 9:52 PM by Ralph Jonhs (UK).
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.This is the one I have been wating for
http://discussions.apple.com/thread.jspa?threadID=406152
kichat: Look and sound great in iChat!
Ian's First FAQ
Also New Today
http://discussions.apple.com/thread.jspa?threadID=121775
kichat: FAQ 2 - How to get my router to work with iChat?
And
http://discussions.apple.com/thread.jspa?threadID=121665
kichat: FAQ 1 - What do I need to start in iChat ?
11:20 PM Thursday; March 16, 2006 -
How do I get Video and Audio Chats with PCs ?: FAQ 3
How do I get Video and Audio Chats with PCs ? (Updated 24/11/05) iChat FAQ 3
Applies to iChat 3.x and iChat 2.x
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
1 Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3
A DSL (Broadband) connection of at least an up link speed of 256kbs.
An AIM or .Mac.com account name.
(hosting Multiple person AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link.
Note: there is also Trillian Which has a Pro version for $25 that can also Video and Audio chat. The Basic just Texts and Audio Chats (AIM does not Audio chat)
Some need the file from item 2 Here
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Nescape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall.
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then, Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound returned to you.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here
My Web Pages
Happy Chatting.
RalphHi Ralph,
Just a type, you misspelled Netscape...
An AIM account/screen name (AOL or Nescape count as well)
Maybe you are looking for
-
Daisy-chaining a ethernet hub to the time capsule
I am using all three of my wired ethernet ports on the time capsule, and I need a fourth. Current set up is 1) Vonage VoIP adapter; 2) printer w/o wireless option; and 3) connection to a EoPL adapter. I was wondering if I can buy a cheap ethernet hu
-
Mismatch in InStock Quantity in Item Master at Item level and W/H Level
Hi, All, I get some mismatch in 'InStock Quantity' at Item level and W/H Level, in Item Master. for Some Item and mismatch increases day by day. ex: At one total item Instock Qty : 100 but in W/H 1
-
Doesn't convert network files?
the palm reader/converter fails silently on files stored on the network. same files worked when copied to local hd. any idea why? w/s is win2k. network drives hosted on a unix server. Adobe for Palm version 3.0. thanks!
-
How can I write the loop for this?
public void currentConnectedPlayers (String[ ] connectedPLayers) //connectedPlayers contains the names of players connected to the server. //Display the list of connected players, but SELF is not included in the display list how will I be able to ide
-
Seagate 400gb sata HD not readable by g5 quad
Read the post about the 500gb. Bummers I didn't read it before I bought this HD. Bought the hd from OWC and was wondering what their return policy would be- maybe I'd trade it in (or maybe I'll go to compUSA this weekend and buy a different model and