How do i get it to my website once i have finished

how do i get it to my websites after i have finished

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

Similar Messages

I Uploaded a Flash Folder To My Host Using FileZilla. Now How Do I Get It To My Website?

I Uploaded a Flash Folder To My Host Using FileZilla. Now How Do I Get It To My Website? Flash DVD folder created in Encore. I want to put it on a website to play like a DVD. I got a host ftp server from GoDaddy and they told me to install FileZilla to upload files to my site location. But I am in Muse now and I do not see how to bring it into my project assets panel.

You can either link the file to your page content or you can add the files to upload in Muse and then use any player of add embed code to play the file on page.
Thanks,
Sanjit

How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?

How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?

Depends on the Mac; what model and processor is it?
 > 'about this Mac' > 'more info'
In the first section (hardware overview) post this info;
Nothing below that is reqd, especially not the serial number.

HT3887 my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck

How can i get a power bar code i only have a ee mobile wifi

How can i get a power bar code i only have a ee mobile wifi which doesnt allow me to sent texts .. ive tried the sim card in a unlocked phone but it wont send texts

You could try putting your SIM into an EE phone. It's only a SIM, it should be be able to send an SMS.

After deleting a song from my iPhone, it still playing. How can i stop that? How can i get rid of the song once for all?

After deleting a song from my iPhone, it still playing. How can i stop that? How can i get rid of the song once for all?

I'm pretty sure that the solution is in the settings of her email

How can I get rid of old books that I have deleted from my device? It still shows up as purchased books on "Icloud".

How can I get rid of old books that I have deleted from my device but still shows up as "purchased books" on "Icloud". I don't want to see some of these books at all. I can sort by one that are PDFs and ones currently on device, but it still gives option to show those old titles. Does anyone know how to erase your "Icloud" history, please?

Nooooooo! lol... If I want to download again I will, I don't want an electronic trail. Plus when I have Ibooks open, sometimes I will accidently hit the item and it will immediatly try to download it. The problem with that is that its "Time magazines Best Photos of 2012" etc and it locks up my IPAD cuz of sheer size of the book. So I would like it gone from the history. Isn't there a way to clear the history?

How do you get your ring tones back once you reset your phone?

How do you get your ring tones back once you reset your phone?

Sync them from your computer.

How do you get your Excel Solver back? I have already tried going into add-ins. It only recently stopped working.

How do you get your Excel Solver back? I have already tried going into add-ins. It only recently stopped working.

dougiedc wrote:
It boggles the mind. The Verizon store on L Street downtown Washington, D.C. cannot access my Verizon account. They can only sell cellphones then it's up to me to contact Verizon on my own to get the hook up. I even asked "Are you Verizon employes? Is this a vendor store or is it really a Verizon owned and operated store?" The answer "Yes, we are Verizon employes, yes this is a Verizon owned and operated store" ...
Yes, it indeed boggles the mind. I'm of course referring to the fact that your post concerns Verizon Wireless products and services. This forum is dedicated exclusively to Verizon Communications services. As you probably know, Verizon Wireless and Verizon Communications operate as separate companies.
If you need help for a Verizon wireless product or service, it's best to direct questions to the Verizon Wireless forums. You can reach them by clicking on "Wireless" (either here or at the top of the page).
Good luck and I sincerely hope you get your issue resolved.

How can i get my contacts back if i dont have the back up

How can i get my contacts back if i dont have the back up

if you didn't back them up then you cant get them back without physically puting them back in.

I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows. How do I get back to Mac so I can have a choice of drives?

I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows. How do I get back to Mac so I can have a choice of drives?

That doesn't sound good. It sounds like the power outage might have corrupted the partition for OS X. I would suggest booting from the Install DVD that came with your Mac while holding down the C key. Once you have selected the language start up Disk Utility from the pull down menu and repair the disk. Once you have done that then repair permissions also.
Allan

My Iphone 5 says it has 7552 songs on it, however my iTunes only has 4125 on it. How do i get my phone to stop saying i have that many songs?

My Iphone 5 says it has 7552 songs on it, however my iTunes only has 4125 on it. How do i get my phone to stop saying i have that many songs?

It seems to happen with songs that were purchased before synchronizing the new iPhone
I will tell you how I fixed it.
Note: I have iTunes in spanish so I will try to translate and figure out the commands that appear on ITunes in english. I will put my translations into brackets. English is not my native language. I will do my best.
The workaround is:
1.- Dragg no working songs from iTunes to a folder on the hard disk. (Only for backup purposes)
2.- Deleted those songs from iTunes library.
3.- On the left panel in ITunes click on "Purchased" under the STORE option. All your purchased songs will appear on the right panel
4.- At the bottom and right there is the option : "Download Previous Purchases". Click there.
5.- Click on the option "Are not in my Library" (top right)
6.- The songs you deleted from iTunes will appear.
7.- Downloaded them again. (You have the option to download at the bottom right)
8.- Syncronize your iPhone and that's all.

I downloaded Adobe immigration software for Aperture, opened Lightroom, but the Aperture library was grayed out so it couldn't be selected to import. How do I get it to work? I only have a few days left on the test version of Lightroom to see how it works

I downloaded Adobe immigration software for Aperture, opened Lightroom, but the Aperture library was grayed out so it couldn't be selected to import. How do I get it to work? I only have a few days left on the test version of Lightroom to see how it works with my Aperture library.

Gracias photo-enthusiast por tu respuesta pero hay docenas de de usuarios que tienen esta mismo problema, me da la sensación que nos tomas por gagas que no tenemos ni idea de lo que tenemos entre manos.
Me alegro enormemente que no hayas tenido tu este problema.

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Only my App Store is in French. How do I get it back to English? I have not been in another country and my languages under settings is set to English.

Only my App Store is in French. How do I get it back to English? I have not been in another country and my languages under settings is set to English.

Follow this procedure:
1. Go to Settings > iTunes & App Stores > Apple ID.
2. Tap your Apple ID.
3. Tap View Apple ID.
4. Enter your password.
5. Go to Country/Region in the popup window to change to the desired store.
See also: http://support.apple.com/kb/HT1311

How do i get it to my website once i have finished

Similar Messages

Maybe you are looking for