How do i get itunes to recognize or sync to my ipod classic

How do I sync my ipod classic to itunes so I can download purchased music?

Hi mane_tamer,
Thanks for your question.  Do you have the latest version of iTunes on your PC?  If not, here's how to update it:
Update to the latest version of iTunes - Apple Support
http://support.apple.com/en-us/HT201352
Windows
Open iTunes
From the menu bar, choose Help > Check for Updates. In earlier versions of iTunes, you can find this option in the Advanced menu. Learn how to show the menu bar. 
Follow the prompts to install the latest version.
If you don't have iTunes installed on your computer, download it here.
Get more information about how to install and update iTunes and troubleshooting assistance.
If you are not prompted to install a new version of iTunes, you already have the latest version your operating system can support. See the System Requirements on the iTunes download page.
To learn how to sync your iPod Classic to iTunes for Windows, click on the iPod Classic User Manual below.  I've highlighted the key information about syncing for you (Pages 23-25.)
iPod Classic User Manual
manuals.info.apple.com/MANUALS/0/MA630/en_US/iPod_classic_120GB_en.pdf
Managing iPod classic Manually
Setting iTunes to let you manage iPod classic manually gives you the most flexibility for managing music and video on iPod classic. You can add and remove individual songs (including music videos) and videos (movies and TV shows). Also, you can add music and videos from multiple computers to iPod classic without erasing items already on iPod classic.
Note: Setting iPod classic to manually manage music and video turns off the automatic sync options in the Music, Movies, and TV Shows panes. You cannot manually manage one and automatically sync another at the same time.
To set iTunes to let you manage music and video on iPod classic manually:
1  In iTunes, select iPod classic in the source list and click the Summary tab.
2  In the Options section, select “Manually manage music and video.”
3  Click Apply.
Note: When you manage songs and video yourself, you must always eject iPod classic from iTunes before you disconnect it.
To add a song, video, or other item to iPod classic:
1  Click Music or another Library item in the iTunes source list.
2  Drag a song or other item to the iPod classic icon in the source list.
To remove a song, video, or other item from iPod classic:
1  In iTunes, select iPod classic in the source list.
2  Select a song or other item on iPod classic and press the Delete or Backspace key on
your keyboard.
If you manually remove a song or other item from iPod classic, it isn’t deleted from your iTunes library.
To make a new playlist on iPod classic:
1  In iTunes, select iPod classic in the source list, and then click the Add (+) button or
choose File > New Playlist.
2  Type a name for the playlist.
3  Click an item, such as Music, in the Library list, and then drag songs or other items to the playlist.
To add songs to or remove songs from a playlist on iPod classic:
m Drag a song to a playlist on iPod classic to add the song. Select a song in a playlist and press the Delete key on your keyboard to delete the song.
If you set iTunes to manage music manually, you can reset it later to sync automatically.
To reset iTunes to sync all music automatically on iPod classic:
In iTunes, select iPod classic in the source list and click the Music tab. Select “Sync music” and then choose “All songs and playlists.”
Click Apply.
The update begins automatically.
Note: If “Only sync checked items” is selected in the Summary pane, iTunes syncs only items that are checked in your Music and other libraries. 
Enjoy!
- Judy

Similar Messages

  • How do I get iTunes to recognize my iPad 2?

    How do I get iTunes to recognize and sync with my iPad?

    If you are using Itunes 11.0.1 go to View > Show sidebar.
    It will like like previous version sof iTunes with your device on the sidebar.
    Cheers

  • How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old info

    How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old phone. The new phone is my husbands and I don't want to back up my phone info on it. I re connected it hoping it would prompt me with the option again and it doesn't , it just shows up as a back up to my phone. How can I get it to give me that option in the beginning again

    First of all, I think the first time you sync an iPod that's formatted for Windows on a Mac, the sync process reformats it for Mac. You can check what it is now by looking for the iPod with Disk Utility. If it's Mac OS Extended, it's formatted for Mac already.
    Also, there is no current iPod updater app these days. iTunes handles it through the Restore button. If you are not able to use the latest iTunes because of your Mac, I can understand. The latest version of iTunes should run with 10.3.9 or later, if the hardware can handle it.
    You said the battery was low so let it recharge for a while.
    You should also reset the iPod. It's part of the 5Rs, which you should go through as the starting point for iPod trouble-shooting.
    http://www.apple.com/support/ipod/five_rs/wheel/

  • How can I get iTunes to recognize the apps that are missing from the library screen but still on the machine??

    My apps are not showing-up in the iTunes library but they are present in the apps folder. How can I get iTunes to recognize their presence?
    Library-Apps-All (only three of several hundred appear).
    Apps are still present in Users-Music-Mobile Applications
    I am running iTunes 11.0, OS X 10.8.2 on a Mac Pro. 
    Ran Disk Utility, Techtool, Disk Warrior and then reinstalled Mountain Lion, updated it and repaired permissions. No change.
    There is a file that says 'iTunes Library (damaged), which is the iTunes Database file. How can that file be re-created?
    Any technical help on replacing that file with a new, fresh one would be appreciated!

    It has always been very basic to maintain a backup of media and other important files.  If you chose to reinstall the OS without having a backup, well that just is not smart.
    If you are in the US and running iTunes 10.3 or later, iTunes purchases can be redownloaded via iCloud.  Simply log into the iTunes store, select purchases, purchase history and redownload the content.
    If you are not in the US.... well, seems you just learned and important and possibly expensive lesson.

  • HT201269 My old windows computer crashed and I had to buy another one.  I rescued my itunes file off of the old one and installed it on the new desktop.  How do I get itunes to recognize it so that I can get all my old music (mostly burned CD's) to be rec

    My old windows computer crashed and I had to buy another one.  I rescued my itunes file off of the old one and installed it on the new desktop.  How do I get itunes to recognize it so that I can get all my old music (mostly burned CD's) to be recognized

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • How do I get itunes to recognize all of the music in my library. I backed up the library for 24.95 and not all of it went into the backed up library?

    How do you get Itunes to recognize all the music in your library when you buy the backup in the cloud? Alot of my  music was not backed up. These are songs I burned off my CD collection. Itunes Match did not recognize them either?

    *What am I doing wrong?*
    You moved it to the server.
    You should let iTunes do it.
    Point iTunes prefs to the new location.
    Menu Advanced -> Consolidate library.

  • How do I get iTunes to recognize my iPod over a network?

    Ok So I have an Apple Time Capsule which I use as my router and NAS drive. Though I also plug my iPod into the usb port on it. The iPod is recognized on my computer and over the network easily although how can I get iTunes to recognize it and be able to add music and video?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    You can restore from backup since the screen-lock passcode is not restored.

  • I have two e-mail accounts. A lot of my content is with the older account which is deactivated. How do I get  iTunes to recognize this content?

    I have two e-mail accounts. A lot of my content is with the older account which is deactivated. How do I get  iTunes to recognize this content?

    Authorize the computer for the account.
    Content is permanently tied to the account it was acquired wtih.

  • HT3406 when using my old iphone as a itouch how do i get itunes to recognize as a different device and not the new phone?

    When using my old iphone4 as an itouch - how do i get itunes to recognize as a new and seperate device

    You don't need to do anything. iTunes will automatically recognise different devices as different devices. Just plug it in.
    You can rename the device by clicking the name in the side panel in iTunes for your own identification purposes, but this name does not matter to iTunes.

  • How do i get itunes to recognize songs on my computer that came from a purchased CD?

    How do i get iTunes to recognize songs on my computer that came from purchased Cd's?

    You just import them to iTunes, or you import them to iTunes directly from the CD. But, it you had imported them to the computer before you had iTunes, then you go to edit, add file to library, or add folder to library, however you have the music set up.

  • How do I get itunes to recognize my bookmarks in Mozilla. When I sync my iphone, it does not give an option to sync Mozilla, only IE and Safari

    How do I get itunes to recognize my bookmarks in Mozilla. When I sync my iphone, it does not give an option to sync Mozilla, only IE and Safari

    Hello pbdanner,
    It seems your iPhone isn't recognized in iTunes for Windows. The following article provides troubleshooting steps which may help you find a solution:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • My iPHone is connected to my iMac, and I want to transfer files from iMace to IPhone. Instructions say to go to iTunes, look under Devices for my Device. I do so, and no devices are listed. How do I get iTunes to recognize my iPhone?

    My iPHone is connected to my iMac, and I want to transfer files from iMace to IPhone. Instructions say to go to iTunes, look under Devices for my Device. I do so, and no devices are listed. How do I get iTunes to recognize my iPhone?

    Make sure your iMac is on 10.6.8 or higher and your iTunes is up to date.  If it is, then restart your computer, open iTunes, then plug in your device.  If it still is not showing up, follow the steps listed here: iOS: Device not recognized in iTunes for Mac OS X

  • How do i get itunes to recognize my device

    how do i get itunes to recognize my device

    Hello there,
    It sounds like your iPod Nano is not seen in iTunes. I recommend the troubleshooting steps from the article named:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Here is an overview of the troubleshooting to be done:
    1. Start with the iPod Troubleshooting Assistant
    If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
    If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
    Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
    2. If your iPod displays an exclamation point folder or sad iPod icon
    3. Charge the iPod and make sure it is getting power
    4. Secure the iPod's connections
    5. Disconnect other USB Devices
    6. Determine whether your iPod's cable functions properly
    7. Place the iPod into Disk Mode
    8. Determine which format the iPod is in
    9. Verify that USB drivers are installed
    10. Determine if Windows confuses iPod with a network drive
    11. Determine if third-party software may be causing conflicts
    12. Reinstall iTunes
    13. Make sure FireWire card is a WHQL-certified IEEE 1394 card
    14. Check for a conflict in the FireWire chain
    15. Determine if there may be an issue with your computer
    16. Your iPod needs service
    If the issue persists, try uninstalling iTunes and its associated apps with this article named:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • How do i get itunes to recognize my iphone 4?

    How do i get itunes to recognize my iphone 4 on my imac?

    You can connect in recovery mode, start iTunes, connect the USB end of the cable, then while holding the home button connect the dock connector end of the cable.

  • How do i get itunes to recognize my iphone, not someone elses?

    How do i get itunes to recognize my iphone on itunes and not my boyfriends? I have set up my own itunes account, it is on the same computer and i cant create a seperate user profile. However any suggestions so i can sync my iphone would be very much appreciated.

    Only one logged in user at a time. You must be logged in to your iTunes account then Menu/Store/Authorize This Computer.
    This authorizes your bf's computer for your account.

Maybe you are looking for

  • I have two iMac 24" how can i run them as one machine

    im trying to figure out how to connect my two 24" to opertar as one machine if any one has the answer please help thanks

  • Fonts not Carying Over

    I have a file where I'm using the font "Symbols" to make a block which is the letter n, when I export it does so with a time new roman n instead of the block.  Do you have any idea how to fix this? I am also having a problem deleting pages, I delete

  • After BI 7.0 Upgrade, Authorization Roles and profiles are not visible

    Hi Gurus, We have an issue with authorization roles and profiles are not visible for all end users with new Bex Analyzer (BI 7.0) tool. But still they can see these roles with old Bex Analyzer ( Bex 3.5) tool. As a developer I have SAP_ALL acces and

  • How To: Applet Communication to a WL Cluster

              Hello,           I currently have a Java 1.2 applet that has been converted to           use a WL cluster (it needed fail over and load balancing.)           The applet communicates with servlets (which in turn communicate           with st

  • Dynamic Portal personalization ( themes, languages)

    Hello All, I have a requirement which is as below 1) Based on the roles/group attached to a user id, we should limit the list of available languages/themes dynamically in Portal personalization. For e.g when user with "X" role logins in, he can perso