How do I get latest DNG converter to recognize Fuji RAF files?

So, I run Macbook Pro. Snow Leopard 10.6.8 Downloaded latest version of Adobe DNG. It won't recognize any raw files. Including Fuji XE 2 raw. I thought it should be able to. The XE 2 is listed as a supported camera.
My hope was to convert the XE 2 raw files to DNG to open in LR 4
What am I missing? Thanks for any responses.

The most common problem new users have with the DNG converter is when they browse using the converter to locate their raw files. Often they will double-click on the folder containing their raw files and will be notified that there are no files to convert. The key to using the DNG converter is to choose the FOLDER containing the raw files, but don't open that folder. When you choose the folder then the DNG converter will convert all raw files in that folder and put them wherever you choose to have them put. If you only want to convert certain files then you need to locate those files with the DNG converter closed (not running) and drag/drop those specific raw files onto the icon for the DNG converter. If either one of these suggestions don't help then please let us know and we will try to figure out what is happening.

Similar Messages

Latest DNG converter not working in command-line mode

Today I downloaded Adobe's latest DNG converter. It is failing with both .NEF and .CR2 files when run in command-line mode. It does appear to work in GUI mode. The switches+arguments I've used for my tests are:
-u -e -p1 filename.CR2
(or filename.NEF)
With an older (CS2) version of the converter, the above arguments produce a .DNG output file as expected (with .CR2 files; I didn't try it with D3 .NEF files; surely that older version doesn't support the D3's format).
With the very latest version, running the program with the above command produces no output. There's no error message.
The 'readme' file that comes with the converter doesn't include any information about command-line usage, but I did find a PDF file covering this (adobe.com/products/dng/pdfs/dng_commandline.pdf). The switches+arguments shown in the PDF file appear to be exactly the ones I used in the past.
I'm sure I'll need to use the most recent version to convert D3 RAW files. Is there something wrong with how I'm specifying its command-line switches/arguments?

It struck me silly that I've been running tests with v.3.3 when 5.2 is the latest, so I downloaded it. The setup "wizard"...hmm, why is it a "wizard"? It provides no choice of installation path. I didn't realize this because immediately after I'd launched it, I knocked something onto the floor, reached down to pick it up ... and looked back up just in time to see the "wizard" complete the installation...but where, I didn't know. It didn't display any information about where it had installed the app. Adventures In Discoverability. :) I hunted around on the hard drive until I found it (C:\Program Files\Adobe -- well, at least you can launch it if you think to look for it in the 'Start' menu). So ... that needs a bit of work. Anyway, I copied the app into a directory of my choice -- one that's in my system's %PATH%, replacing spaces in the name with underscores. It works fine in that directory -- no problem with the name-change as far as I can tell. Now back to the fun stuff...
This version doesn't seem to require a fully qualified path to the input file or to the output directory when "-d" is used. That's an improvement. IOW, this worked:
converter -p1 -d DNG filename
where "converter" is the program's name, "DNG" is the name of a subdirectory of the directory where I'm running the test, and "filename" is the name of a RAW file in that directory.
The program still doesn't know how to create a directory (or ask about creating one if it doesn't exist). Fails silently if "-d" is used and the specified directory doesn't exist. But at least this version returns an exit code of 1 due to the failure -- better than returning 0.
Still doesn't understand wildcards. Hope done sprang eternal there for a moment, but oh well. Back to "for" loops...
Still fails silently, returning exit code 0 (oops), if a nonsensical command-line is used (e.g., using "-c" as the only argument).
Hey, how about a truly silly command-line error -- a command line including both "-c" and "-u". What happens? It "consumes" the first of the two mutually exclusive switches, ignoring the second -- you get a compressed DNG file. Swap the order of the switches, and you get an uncompressed file. (I'd vote for a syntax-error message in that case, m'self.)
Interestingly strange little program...If I run it from the command line, it drops back to the command line immediately after I press ENTER. That makes it appear to have failed. But it hasn't -- it's running in the background, and a few seconds later the DNG file is created. But, if I run it from within a batch file, it does NOT return control to me until it has completed writing the output file. Wonder what's up with that.
Fun stuff. :)

I'm having troubles converting my raw files from Nikon D5200 (NEF) to DNG. I tried using Lightroom 4, but it didn't identify the folder containing the files. So i downloaded the latest DNG converter but that too didn't identify the files kept in the folde

I'm having troubles converting my raw files from Nikon D5200 (NEF) to DNG. I tried using Lightroom 4, but it didn't identify the folder containing the files. So i downloaded the latest DNG converter but that too didn't identify the files kept in the folder location. So I downloaded DNG converter v7.3 for D5200. It identifies the folder and files; but it is giving me parsing error on trying to convert files. I'm running Windows Vista Home Edition SP1. Kindly advise. Thank you.

I probably missed this detail in what you’ve posted, but do you see the thumbnails of the three cameras’ raw files in Finder if you don’t convert to DNG?
What has happened in the past is that the Apple raw interpreter doesn’t read thumbnails of DNGs it doesn’t like, where at least one thing it didn’t used to like was embedded lens corrections for mirrorless cameras. Are the Olympus and Panasonic mirrorless—meaning there is no optical viewfinder and everything is seen on an LCD screen or perhaps an electronic view finder? If so the reason these are different is that the camera is doing the lens distortion corrections automatically and this information is stored in the raw files and in the DNGs but Apple doesn’t know how to use these embedded lens corrections or doesn’t know how to read the newer DNG spec that does allow for this information to be embedded in the DNG, at least.
Apple could just extract the embedded jpg preview and ignore the other parts of the file it doesn’t understand, but it apparently doesn’t do this.
What I’m not sure about is if the Apple raw interpreter still has this problem or if you’re on an older system without the latest updates for camera raw decoding by Apple.

How do I get the PDF Convert feature of Adobe Acrobat Pro Extended 9.4.4, which makes a PDF of a web page interactive, to work in Firefox 4.0.1?

I just installed (on my Windows 7 Ultimate (64 bit) operating system/Intel i5 CPU M560 2.67 GHz) and am now using as my default browser Firefox 4.0.1 because Internet Explorer 9 was giving me so much trouble--lack of display of web content, lack of PDF reproduction when web content displayed, screwball formatting display, etc., all of which has been remedied by the mere installation of Firefox 4.0.1.
How do I get the PDF Convert feature of Adobe Acrobat Pro Extended 9.4.4, which converts a web page to an interactive PDF, to set up and work on Firefox 4.0.1?

You can not do that using Adobe Acrobat 9. Adobe never made a create PDF add-on for Firefox for use with Adobe Acrobat 9. They created a Firefox add-on for use with Acrobat X, but currently that one does not work with Firefox 4 though Adobe are working on an update.

I converted aif files to mp3 files in I tunes so I could put them on a flash drive. Now when I transfer an album to the flash drive I get both the aif files and the mp3 files in the flash drive. How do I get the iTunes to only copy the smaller file?

I converted aif files to mp3 files in iTunes so I could put them on a flash drive. Now when I transfer an album to the flash drive I get both the aif files and the mp3 files on the flash drive. How do I get the iTunes to only copy the smaller file?

My suggestion to use the smart playlist was more along the lines of making one list with rules to show everything in your library as long as it was kind "mpeg" (= mp3).
Smart playlists cannot be edited manually, only by changing the rules. You can use them as the basis for another smart playlist though.
There is added overhead to using smart playlists, so don't go overboard.

I used to have a IPOD Touch know i have a IPhone 4 how do I get my music converted?

I used to have a ipod touch know i have a iphone 4 how do I get my music converted over to my iphone 4?

As both devices support the same music formats, there is no need to convert anything. Connect your iPhone to iTunes and sync your music.

An app requires a later operating system but iTunes indicates phone has latest operating system. How do I get latest system?

An app requires a later operating system but iTunes indicates phone has latest operating system when I sync with the computer. How do I get latest system if iTunes says I have the latest?

If you have a Verizon iPhone 4, the current version of iOS is 4.2.10. You can not install anything higher at this point. The next release of iOS will most likely be iOS 5.

How do I get latest Mail application

How do I get latest Mail application to work on OS 10.6.8?

Somehow you have the incorrect version of Mail installed on the computer. So, here's what I suggest your do:
First, you want to put the copy of Mail that's in your Applications folder into the Trash. Locate your Snow Leopard DVD and insert it into your optical drive. Use the following procedure to install
How Restore Deleted or Missing OS X Components
A few of the basic OS X installed applications can be restored from the Optional Installs installer located in the Optional installs folder on your Installer DVD.
Reinstall Mail from the Snow Leopard DVD then download and reinstall the Mac OS X 10.6.8 Update Combo v1.1 updater. This should fix you right up.

How do I get a codec which will support my avi files?

How do I get a codec which will support my avi files from my D90?

Lightroom 5.5 is the latest version. If you don't want to wait for the next release, you can download Adobe DNG Converter 8.6RC which will transform your D810 NEFs into DNGs that the current version of Lightroom can use.
Download Adobe Photoshop Camera Raw 8.6 Beta - Adobe Labs
The above URL will evidently download both Camera Raw and the DNG Converter release candidates.
Hal

I had an older iPhone 3 and just purchased the 4S. How do I get my MacBook Pro to recognize it?

I had an older iPhone 3 and just purchased a 4S. How do I get my MacBook Pro to recognize it so I can sync it with my computer?

Make sure you have the latest version of iTunes installed on you MacBook then plug the USB cable into your iPhone 4s.

How do I get the last changed date & time of a file in app server?

Hi Experts,
How do I get the last changed date & time of a file in app server?
Thanks!
- Anthony -

Hi,
that's what I use...
CALL 'C_DIR_READ_FINISH'.             " just to be sure
CALL 'C_DIR_READ_START' ID 'DIR' FIELD p_path.
IF sy-subrc <> 0.
    EXIT. "Error
ENDIF.
DO.
    CLEAR l_srvfil.
    CALL 'C_DIR_READ_NEXT'
      ID 'TYPE'   FIELD l_srvfil-type
      ID 'NAME'   FIELD l_srvfil-file
      ID 'LEN'    FIELD l_srvfil-size
      ID 'OWNER' FIELD l_srvfil-owner
      ID 'MTIME' FIELD l_mtime
      ID 'MODE'   FIELD l_srvfil-attri.
*    l_srvfil-dir = p_path .
    IF sy-subrc = 1.
      EXIT.
    ENDIF." sy-subrc <> 0.
    PERFORM p_to_date_time_tz
      USING    l_mtime
      CHANGING l_srvfil-mod_time
               l_srvfil-mod_date.
    TRANSLATE l_srvfil-type TO UPPER CASE.               "#EC TRANSLANG
    PERFORM translate_attribute CHANGING l_srvfil-attri.
    CHECK:
      NOT l_srvfil-file = '.',
      l_srvfil-type = 'D' OR
      l_srvfil-type = 'F' .
    APPEND l_srvfil TO lt_srvfil.
ENDDO.
CHECK NOT lt_srvfil IS INITIAL.
pt_srvfil = lt_srvfil.
FORM p_to_date_time_tz USING    p_ptime TYPE p
                        CHANGING p_time   TYPE syuzeit
                                 p_date   TYPE sydatum.
DATA:
    l_abaptstamp TYPE timestamp,
    l_time       TYPE int4,
    l_opcode     TYPE x VALUE 3,
    l_abstamp    TYPE abstamp.
l_time = p_ptime.
CALL 'RstrDateConv'
    ID 'OPCODE' FIELD l_opcode
    ID 'TIMESTAMP' FIELD l_time
    ID 'ABAPSTAMP' FIELD l_abstamp.
l_abaptstamp = l_abstamp.
CONVERT TIME STAMP l_abaptstamp TIME ZONE sy-zonlo INTO DATE p_date
      TIME p_time.
ENDFORM.                    " p_to_date_time_tz
Regards,
Clemens

I accidentally erased a music album that I purchased on iTunes. How can I get the iTunes store to recognize that it is no longer in my iTunes library and download it again?

I accidentally erased a music album that I purchased on iTunes. How can I get the iTunes store to recognize that it is no longer in my iTunes library and download it again?

Delete the broken links in iTunes then look at your purchased list to redownload.
If this happened because you were deleting files from the iTunes folder in Finder, don't. You have to let iTunes do all the deleting and moving or you will end up with broken links.

How do I get my MacBook Pro to recognize my Toshiba external hard drive?

How do I get my MacBook Pro to recognize my Toshiba external hard drive? I'm working on transferring my music from our home computer to my new laptop and I already got all my music onto the hard drive but now, when I plug it into my MacBook Pro, it doesn't recognize it. There isn't an icon that pops up and nothing happens at all. The blue light on the hard drive that indicates that it knows it is plugged into something comes up but that's about it. Someone told me I might have to "format" it but I don't know what that means and I don't know how to do it. I just want to get my music from the hard drive to my laptop so please help!

natgray17 wrote:
I don't know about your first question... I went to finder, preferences, then general but I didn't see anything for the hard drive.
Huh, in the Finder menu, Preferences, you will see this:
Nope, disk utility cannot see it. I've tried unplugging it and plugging it back in but it still won't recognize it.puter that's a Mac...
If DU cannot see it then the preferences is just an academic exercise.
If this is a USB drive then as mentioned above you may need a powered USB hub since there may not be enough power from the USB to run the drive. What else do you have plugged into the USB ports? If there's some stuff you can unplug it then do it and see if your drive mounts.
What do you mean from a Windows machine? It's a Toshiba hard drive and I put my music on it from my home computer that's a Mac...
Which is all I wanted to know, i.e., whether the drive came from a Winows machine. So it's been formatted and created on a mac. Therefore it should mount on this other mac machine. So it most likely is a power problem.

How do I get my macbook pro to recognize my android phone so I can transfer photos from the phone

how do I get my macbook pro to recognize my android phone to I can transfer photos from the phone

you could try this:
http://www.android.com/filetransfer/
there's something called "Airdroid" on the Play store (whatever that is)
or if your files are on an sd card, you may wish to use an sd card reader. Just plugging it in via USB might possibly work. There's also something called DoubleTwist (basically iTunes for Android, which will allow you to
sync your music , photos, videos, etc
hope one of these works for you
John B

I downloaded the new Pages and Numbers through my app store but when I open my old documents, it still tells me my 30 day trial is over. How do I get the computer to automatically recognize the new applications?

More information: I have a 3 year old MacBook and had been using "Microsoft for Mac" until last week when I took my MacBook in for some upgrades- including the operating system Lion. I have been unable to use the Word, Excel, etc. programs because they are not supported on the new operating system... and I already used my 30 day trial of iWork when we first purchased the computer. I decided to buy Pages and Numbers through the App Store icon. When I open the Pages and Numbers under my Applications, I can get them to work. However, when I open old documents saved on my computer, they go into the 'old' iWork messages of that my trial has expired. How do I get the computer to automatically recognize that I've purchased Pages and Numbers?

You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

How do I get latest DNG converter to recognize Fuji RAF files?

Similar Messages

Maybe you are looking for