How do I get Litghtroom 4 to recognize my Fujifilm S5 Pro?

I have been trying to get the program to recognize the my camera. Adobe help says my camera is supported, but there is no information as to the specific steps that should be taken to set up tethering to a PC.!!

Although the S5 Pro is supported in Lightroom, tethering is not.

Similar Messages

How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old info

How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old phone. The new phone is my husbands and I don't want to back up my phone info on it. I re connected it hoping it would prompt me with the option again and it doesn't , it just shows up as a back up to my phone. How can I get it to give me that option in the beginning again

First of all, I think the first time you sync an iPod that's formatted for Windows on a Mac, the sync process reformats it for Mac. You can check what it is now by looking for the iPod with Disk Utility. If it's Mac OS Extended, it's formatted for Mac already.
Also, there is no current iPod updater app these days. iTunes handles it through the Restore button. If you are not able to use the latest iTunes because of your Mac, I can understand. The latest version of iTunes should run with 10.3.9 or later, if the hardware can handle it.
You said the battery was low so let it recharge for a while.
You should also reset the iPod. It's part of the 5Rs, which you should go through as the starting point for iPod trouble-shooting.
http://www.apple.com/support/ipod/five_rs/wheel/

When I open InDesign files from our design team, the fonts don't show up even though I have them installed on my computer. How do I get it to recognize fonts I have installed?

I use my Adobe programs from the Creative Cloud. When our design agency sends me files, I open them and fonts I have on my computer aren't showing up when I open the file. Everywhere online it says I need to add the fonts to InDesign's font file, but since I'm working out of the Creative Cloud, I don't have that option. How do I get InDesign to recognize these fonts when I'm opening files from our agency?

ID sees fonts installed on your computer and contained in a Document Fonts folder in the same folder as the document, if one exists.
I don't really understand what you are saying about fonts you have installed not showing up. And cloud makes no difference -- all the applications and support files are installed on your hard drive.

How do i get Dreamweaver to recognize my website

I had to wipe clean my PC, I saved all the Dreamweaver files. I reloaded Dreamweaver on my freshly built C drive. I also placed all the Dreamweaver files on C drive in the same location before the rebuild. my questions are these
1, how can I get Dreamweaver to recognize the files and links on C drive or
2, how can i down load the site from the Web to dreamweaver
Thank you in advance
Ciro

Have a look here http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html

Itunes recently updated on my PC and now it will not recognize my iPhone. How do I get it to recognize so I can sync?

I updated iTunes this morning and afterwards I went to sync my iPhone and iTunes will not recognize the iPhone. The computer will, but iTunes will not. How do I get iTunes to recognize the iPhone so I can sync. I do have the phone connected to the computer with the cable.

http://support.apple.com/kb/TS1538
Going to venture a guess your Apple Mobile Device service isn't started.

My new iPad is synced with iTunes but now it won't recognize my iPod nano. How do I get it to recognize both? iTunes synced with my Nano just fine until I added the iPad.

My new iPad is synced with iTunes but now it won't recognize my iPod nano. How do I get it to recognize both? iTunes synced with my Nano just fine until I added the iPad.

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

How do I get finder to recognize my hard drive after pulling my hard drive out without eject...? Is my hard drive dead? I see it in disk utility... Can I get my info back?

I have a seagte back up plus. I pulled my hard drive out without ejecting it and now finder dosn't find it but I see it in disk utility (although I cant repair permissions) How do I get finder to recognize my hard drive after pulling my hard drive out without eject...? Is my hard drive dead? I see it in disk utility... Can I get my info back?
Thank you so much for any help

In Disk Utility you need to see a volume or partition in addition to the drive.
If all you see is the drive, then when you ejected it you proably corrupted the volume or partition on the drive.
If that is true then your chances of getting anything back are slim at best.
About the only thing I know that might work not is to send the disk out to a service for recovery. This is going to cost like $$$$.
Is the data worth that much?
Allan

How can I get iTunes to recognize the apps that are missing from the library screen but still on the machine??

My apps are not showing-up in the iTunes library but they are present in the apps folder. How can I get iTunes to recognize their presence?
Library-Apps-All (only three of several hundred appear).
Apps are still present in Users-Music-Mobile Applications
I am running iTunes 11.0, OS X 10.8.2 on a Mac Pro.
Ran Disk Utility, Techtool, Disk Warrior and then reinstalled Mountain Lion, updated it and repaired permissions. No change.
There is a file that says 'iTunes Library (damaged), which is the iTunes Database file. How can that file be re-created?
Any technical help on replacing that file with a new, fresh one would be appreciated!

It has always been very basic to maintain a backup of media and other important files. If you chose to reinstall the OS without having a backup, well that just is not smart.
If you are in the US and running iTunes 10.3 or later, iTunes purchases can be redownloaded via iCloud. Simply log into the iTunes store, select purchases, purchase history and redownload the content.
If you are not in the US.... well, seems you just learned and important and possibly expensive lesson.

HT201269 My old windows computer crashed and I had to buy another one. I rescued my itunes file off of the old one and installed it on the new desktop. How do I get itunes to recognize it so that I can get all my old music (mostly burned CD's) to be rec

My old windows computer crashed and I had to buy another one. I rescued my itunes file off of the old one and installed it on the new desktop. How do I get itunes to recognize it so that I can get all my old music (mostly burned CD's) to be recognized

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

How do I get itunes to recognize all of the music in my library. I backed up the library for 24.95 and not all of it went into the backed up library?

How do you get Itunes to recognize all the music in your library when you buy the backup in the cloud? Alot of my music was not backed up. These are songs I burned off my CD collection. Itunes Match did not recognize them either?

*What am I doing wrong?*
You moved it to the server.
You should let iTunes do it.
Point iTunes prefs to the new location.
Menu Advanced -> Consolidate library.

How do I get iTunes to recognize my iPod over a network?

Ok So I have an Apple Time Capsule which I use as my router and NAS drive. Though I also plug my iPod into the usb port on it. The iPod is recognized on my computer and over the network easily although how can I get iTunes to recognize it and be able to add music and video?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can restore from backup since the screen-lock passcode is not restored.

How do I get Flash to recognize my TextInput from class?

Hi -
I'm trying to write a class for a standard input form. I've
got a movieclip in the library and have linked it to this class.
(class included below.)
This movieclip contains several text inputs which I have
declared in my class file. I can get their ._x and ._y values, but
I can't assign to the .text value of the TextInput. Nor can I read
this value when I set it in the parameters tab in flash. It just
comes up as undefined.
It's as though flash does not recognize the instance that was
placed on the stage in the authoring environement as a TextInput. I
can trace out the instance, but Flash does not treat it as a
TextInput because I can not assign a string to the .text property.
If I instantiate the TextInput in my class file and then
position it on the stage - I can assign to it. But this is not as
practical because I can not lay things out visually in Flash. How
do I get Flash to recognize my TextInput instance on the stage from
a class file?
Thanks in advance!
import mx.controls.TextInput;
import mini.slide.*;
class mini.slide.InfoCollect extends Slide{
var first:TextInput;
var testInput:TextInput;
var last:TextInput;
var email:TextInput;
var address:TextInput;
var city:TextInput;
var zip:TextInput;
var phone:TextInput;
function InfoCollect(){
trace("InfoCollect created");
this.first = new TextInput();
this.first.text = "testing";
trace("this.first = " + this.first.text);
}

Since you are putting the assignment and trace statements in
the Constructor function, it is possible that the textInput boxes
have not all yet loaded. So, when you are trying to assign values
to them, they are not present on the stage.
Put your code in an onLoad function. That way you can insure
that all components have loaded before you assign values to them.
The onLoad function will be called when the "onLoad" event is
triggered after all of your movieclip has loaded.
function onLoad() {
---your code here---
}

Bridge wont recognizw my Nikon d610. I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in. How can I get bridge to recognize my camera? Thanks to anyone who can help!!

Bridge wont recognizw my Nikon d610. I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in. How can I get bridge to recognize my camera? Thanks!!

That camera model has been supported since ACR 8.3 and it is most certainly supported by ACR 8.6 and ACR 8.7 (beta).
Either you have damaged, corrupt image files, or a faulty Photoshop and/or ACR installation.
If there are no privacy issues, you can post one of your files to the FTP service of your choice (such as Dropbox or yousendit.com), post the link to it, and someone here can take a look at it for you.

How can I get RoboHelp to recognize my FrameMaker installation?

I have Technical Suite 3.5 installed and several RoboHelp projects linked to FrameMaker books.
The Frame books were created in FrameMaker 10. I then upgraded to Technical Suite 3.5, then later upgraded my FrameMaker to 11.
All was well, RoboHelp continued to update from the Frame book files.
Then last week my hard disk crashed. IT provided a new disk, installed the Technical Suite and FrameMaker 11, but now when I open the RoboHelp projects and try to update them, RoboHelp displays an error message that says "Adobe FrameMaker 10 is not installed. No FrameMaker documents can be updated."
When I try to relink the project to FrameMaker (File | Link), I get a similar message: "This operation cannot be completed without FrameMaker 10. Install FrameMaker 10 and try again."
How can I get RoboHelp to recognize my FrameMaker 11 installation, which it used to do prior to the crash and reinstallation?
Thanks.
Jerry

We also cannot get Robohelp to recognize our FrameMaker installation.
We are using Robohelp 9 and Framemaker 11.
We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so. So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
"This operation cannot be completed without FrameMaker. Install FrameMaker and try again."
I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error. Buying a set of new Robohelp 10 licenses probably isn't an option.
Any other suggestions?
Thanks,
Sue

I have two e-mail accounts. A lot of my content is with the older account which is deactivated. How do I get iTunes to recognize this content?

I have two e-mail accounts. A lot of my content is with the older account which is deactivated. How do I get iTunes to recognize this content?

Authorize the computer for the account.
Content is permanently tied to the account it was acquired wtih.

HT204387 I told my iPod to forget a Bluetooth device, how do I get it to recognize that device now?

I told my iPod to forget a Bluetooth device, how do I get it to recognize that device now?

.- Reset network settings: Settings>General>Reset>Reset Network Settings
You will also have to rejoin all wifi netwoks

How do I get Litghtroom 4 to recognize my Fujifilm S5 Pro?

Similar Messages

Maybe you are looking for