How do I get LR3 and CS5 read Nikon P7700 raw files?

Just bought a Nikon P7700 so I can use the Raw feature. CS5 and LR3 do not read the P7700 Raw Files....does Adobe have an update and/or plugin for this?

It depends.....if your normal route into PS is through Lightroom and the "Edit in..." process, then no you won't need to update PS as well as Lightroom will handle the Raw conversion. But if you have a need to directly open raw files into Photoshop's ACR plug-in, then yes you would need to upgrade PS as well.

Similar Messages

I cannot read Nikon D600 raw files with CS5

I cannot read Nikon D600 raw files with CS5, I have tried Camera Raw 6.1 update but that has not worked.

Nikon D 600 will work with ACR 7.3 which needs minimum of PS CS 6 : http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
With PS CS 5, ACR 7.3 will not work.
So either you need to upgrade to CS 6 or use DNG converter to convert images to DNG format which you can open in CS 5

Reading Nikon camera Raw files

I use Photoshop CS5. My camera is a Nikon D610. Is there a plug in that I can add so that I can read the Nikon camera Raw files?

estello wrote:
Thank you. I have a Nikon D3200 and hope it works for this Camera too
Not necessarily. The answer is different for every single camera. It also depends on which version of Photoshop you're running.
The D3200 was first supported by Adobe Camera Raw 7.1 which is compatible with CS6 and later (not CS5)
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

How can I get a free adobe reader to open the files that my instructor has sent and listen to her feedback

Any Ideas?

Hi tpcruiser22,
Did your instructor provide PDF files? You can get the free Adobe Reader for viewing them from www.adobe.com/products/reader.html.
And if you want to "listen" to the files that your instructor provided, you can activate Read Out Loud in Reader by choosing View > Read Out Loud > Activate Read Out Loud.
Best,
Sara

How to fix Adobe Elements 11 not opening Nikon D7100 raw files?

Installed Adobe Elements last night and installed the Raw Converter 7.4. Everything worked fine yesterday. Today it will not open the raw files. Uninstalled and reinstalled, same problem!

Are these the same raw files or different ones?
If using Nikon Transfer or other Nikon software ensure you have installed the version for your camera model as older versions of Nikon software can corrupt the latest NEF’s.
Try testing by shooting a few new raw images and opening directly into Elements, without touching them.
Also check that ACR 7.4 is properly installed, from Expert Mode.
Help >> About Plug-in >> Camera Raw.
Press Esc to close the pop-up.

How do I get itunes and iphoto to have the same files on multiple users?

Every time I upload a disc or photos, they show up on my user profile, but not my wife's. It seems like I am wasting a ton of hard drive space reloading the same things between each user. I tried the "shared" folder, but i am not sure that worked.
Thanks for the help...

I don't think that Thomas's solution will work on 10.5.
There are two ways to share, depending on what you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. then:
Quit iPhoto in both accounts
Move the iPhoto Library Folder to an external HD set to ignore permissions. You could also use a dmg.
In each account in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Regards
TD

How do I get Elements 12 to recognize Canon G16 raw files?

Elements comes pre-loaded with ACR 8.0. The G16 is not recogniized until ACR 8.2. PSE is not automatically updating to the latest version. How do I download 8.2 and install it in Elements 12? I have tried the obvious methods with no success. Need some detailed advise on how to do this.

You will need to do a manual install since adobe doesn't let vista or xp update automatically anymore. The general procedure is described here (it's for PSE 11, but everything is in the same place in PSE 12):
http://forums.adobe.com/thread/1266134

How do I get PE 12 to open Nikon D810 RAW (NEF) files to work on?

Running Windows 8.1 machine with Photoshop Elements 12. Can't open RAW files from new Nikon D810. Is there a plug in? Any direction?

You will need to do a manual install since adobe doesn't let vista or xp update automatically anymore. The general procedure is described here (it's for PSE 11, but everything is in the same place in PSE 12):
http://forums.adobe.com/thread/1266134

DNG 8.4 won't read Nikon D7100 raw files?

When i go to the folder containing images from D7100, DNG 8.4 does not show any files to be converted even though there are image files (both NEF and JPG) in the folder.
What am I missing?

I have never used NX2, but I know that it will not recognize or read DNG files. I also know that older versions of Nikon Transfer would damage NEF files so that Adobe products could not read them. Personally, I feel the best approach is to download directly from the card using whatever software you plan to do your work with. For instance, I downloaded using the Lightroom import facility. There really isn't any need to use Nikon software to download NEF files from a Nikon camera. Just as a side note, I use a couple of older Nikon cameras, and I do not convert to DNG. I find little advantage to converting, and since Lightroom fully supports both of my cameras I find it convenient and acceptable to work with the original NEF files.

How to get Adobe Bridge CS5 to open an FLV file in another program?

Hello Folks,
How do I get Adobe Bridge CS5 to open an FLV file in another program other than Flash CS5?
When I double click on an FLV video, it always opens Flash CS5. I want to be able to use one of my other FLV player apps instead.
Thanks

How do I get Adobe Bridge CS5 to open an FLV file in another program other
than Flash CS5?
When I double click on an FLV video, it always opens Flash CS5. I want to be
able to use one of my other FLV player apps instead.
For single use when having pointed the cursor on that file with right mouse
click choose open with and choose the wished application from the fly out
menu.
For permanent use go to Bridge Preferences File Type Association section and
from the list find the .flv file extension. In this line you can select the
little triangle next to Adobe flash and from the list select the one you
prefer, now the all open in this chosen app.

How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5

How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5

If you do not own a license for CS5 there is not much you can do to get it thru Adobe. They only sell current versions of their software (CS6 or Creative Cloud). You would need to find a third party vendor and take your chances with them.
If you do own a CS5 license you can download the software thru the following page and use your serial number to activate:
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and conver

After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.

You should install Camera Raw 4.6.
Visit this page and follow the instructions carefully:
PC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
-Noel

HT1660 I'm getting a message that reads 'The iTunes Library file cannot be saved. You do not have enough access privileges for this operation." Why is this? And how can I fix it?

I'm getting a message that reads 'The iTunes Library file cannot be saved. You do not have enough access privileges for this operation." Why is this? And how can I fix it? I'm worried that I'm going to lose my entire library because of this.

A belated reply, as the problems itunes has have discouraged me from using it much. If you uncheck the "read only" box, it doesn't stay that way! Next time you use it, the box comes up checked.
I'm still having that problem, even when I open iTunes as administrator.
I've yet to see the answer to this problem. I use itunes mostly to download audiobooks, and I'm ready to download more, and want to save them!

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed

Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You

How do I get LR3 and CS5 read Nikon P7700 raw files?

Similar Messages

Maybe you are looking for